Overclock.net › Forums › Case Mods & Cases › Computer Cases › Corsair Obsidian 650D Mid-Tower
New Posts  All Forums:Forum Nav:

Corsair Obsidian 650D Mid-Tower - Page 85

post #841 of 4826
Quote:
Originally Posted by Eric Barney;15206915 
Thanks for sharing this information on that fan. The stock Corsair fan does very little. I have already replaced all the other fans with Noctua's, but they do not make a 200mm fan, and I do not see any other option (Than a 200mm.) for that front fan

Zip tie any fan you want to the mesh.
post #842 of 4826
Yeah, you could put a smaller fan on. And zip ties work good. I ended up not needing them though. Some people have actually drilled more grille holes and mounted two 120mm fans one on top of the other, but it was a lot of work. I think moving the drive bay is the simplest solution, and the curl cut method is pretty easy too. I was going to drill new mounting holes for the NZXT fan but it just doesn't need it. If I decide to cut out the grille I'll drill new holes for this fan and mount it properly.
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
post #843 of 4826
Quote:
Originally Posted by SeanWebster;15207026 
Zip tie any fan you want to the mesh.

I would prefer that the front intake fan has more volume than the fan I have mounted just below the 5-1/4" bays. That would insure that some cooling air is passing over the hard drives

DSC_1742.jpg

Otherwise, my current fan arrangement works very well. And no noise!
I made a few of these wire holder/guides before I was happy with the look. This one will do.. And I'll take this time to show it off.

DSC_1888.jpg
    
CPUMotherboardGraphicsRAM
Intel Gulftown 970  Asus Sabertooth X58 PNY GeForce GTX580 Mushkin Redline 999000 12GB 3x4 
Hard DriveOptical DriveCoolingOS
2xWD Black Caviar 750GB Asus Blue Ray DVDRW x 2 Noctua NH-U12P SE2R Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Viewsonic 27" LCD  Filco Ninja Mech. MX browns Corsair Gold AX850 Corsair Obsidian 650D 
MouseMouse PadAudio
Logictech Trackman Max Payne Creative Fatal1ty Xfi  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Gulftown 970  Asus Sabertooth X58 PNY GeForce GTX580 Mushkin Redline 999000 12GB 3x4 
Hard DriveOptical DriveCoolingOS
2xWD Black Caviar 750GB Asus Blue Ray DVDRW x 2 Noctua NH-U12P SE2R Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Viewsonic 27" LCD  Filco Ninja Mech. MX browns Corsair Gold AX850 Corsair Obsidian 650D 
MouseMouse PadAudio
Logictech Trackman Max Payne Creative Fatal1ty Xfi  
  hide details  
Reply
post #844 of 4826
I'm seriously thinking about getting this case. My only concern is how it will do with temps with the gpu in my sig. Basically all the hot air from the card will be inside the case. I thought about placing the HDD cage in the middle and mounting a fan on top as I've seen another OCN member do. What do you guys think? I won't have the $$$ to get a different card anytime soon, but definitely want to get that NZXT fan Mergatroid has. biggrin.gif
Edited by solsamurai - 10/6/11 at 8:26pm
Mugen (Retired)
(20 items)
 
Mugen 2
(20 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE GIGABYTE GA-890GPA-UD3H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black DVD-RW HL-DT-ST GSA-H60L 
CoolingCoolingCoolingCooling
Thermalright Silve Arrow (TY-140/TY-150) Bitfenix Spectre Pro 200mm Phanteks 140mm Thermalright TY-150 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
CPUMotherboardGraphicsRAM
Intel i5 3570K GIGABYTE GA-Z77X-UD4H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Series SSD Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black 
Optical DriveCoolingCoolingCooling
DVD-RW HL-DT-ST GSA-H60L Thermalright Silver Arrow SB-E Bitfenix Spectre Pro 200mm Phanteks 140mm 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
  hide details  
Reply
Mugen (Retired)
(20 items)
 
Mugen 2
(20 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE GIGABYTE GA-890GPA-UD3H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black DVD-RW HL-DT-ST GSA-H60L 
CoolingCoolingCoolingCooling
Thermalright Silve Arrow (TY-140/TY-150) Bitfenix Spectre Pro 200mm Phanteks 140mm Thermalright TY-150 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
CPUMotherboardGraphicsRAM
Intel i5 3570K GIGABYTE GA-Z77X-UD4H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Series SSD Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black 
Optical DriveCoolingCoolingCooling
DVD-RW HL-DT-ST GSA-H60L Thermalright Silver Arrow SB-E Bitfenix Spectre Pro 200mm Phanteks 140mm 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
  hide details  
Reply
post #845 of 4826
Quote:
Originally Posted by solsamurai;15208877 
I'm seriously thinking about getting this case. My only concern is how it will do with temps with the gpu in my sig. Basically all the hot air from the card will be inside the case. I thought about placing the HDD cage in the middle and mounting a fan on top as I've seen another OCN member do. What do you guys think? I won't have the $$$ to get a different card anytime soon, but definitely want to get that NZXT fan Mergatroid has. biggrin.gif

Arrange your fans for a positive pressure flow, and your card will stay cool. My own cooling challenge has been the North bridge on my X58. My fan arrangement solved that in a big way...biggrin.gif
    
CPUMotherboardGraphicsRAM
Intel Gulftown 970  Asus Sabertooth X58 PNY GeForce GTX580 Mushkin Redline 999000 12GB 3x4 
Hard DriveOptical DriveCoolingOS
2xWD Black Caviar 750GB Asus Blue Ray DVDRW x 2 Noctua NH-U12P SE2R Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Viewsonic 27" LCD  Filco Ninja Mech. MX browns Corsair Gold AX850 Corsair Obsidian 650D 
MouseMouse PadAudio
Logictech Trackman Max Payne Creative Fatal1ty Xfi  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Gulftown 970  Asus Sabertooth X58 PNY GeForce GTX580 Mushkin Redline 999000 12GB 3x4 
Hard DriveOptical DriveCoolingOS
2xWD Black Caviar 750GB Asus Blue Ray DVDRW x 2 Noctua NH-U12P SE2R Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Viewsonic 27" LCD  Filco Ninja Mech. MX browns Corsair Gold AX850 Corsair Obsidian 650D 
MouseMouse PadAudio
Logictech Trackman Max Payne Creative Fatal1ty Xfi  
  hide details  
Reply
post #846 of 4826
I'll have a 200mm in front, the Silver Arrow on the CPU and possibly two TY-140's on top as intake. Don't know about the rear 120 fan yet and also thought about removing all the PCI slot covers...I'm welcome to all ideas. biggrin.gif
Edited by solsamurai - 10/6/11 at 9:09pm
Mugen (Retired)
(20 items)
 
Mugen 2
(20 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE GIGABYTE GA-890GPA-UD3H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black DVD-RW HL-DT-ST GSA-H60L 
CoolingCoolingCoolingCooling
Thermalright Silve Arrow (TY-140/TY-150) Bitfenix Spectre Pro 200mm Phanteks 140mm Thermalright TY-150 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
CPUMotherboardGraphicsRAM
Intel i5 3570K GIGABYTE GA-Z77X-UD4H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Series SSD Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black 
Optical DriveCoolingCoolingCooling
DVD-RW HL-DT-ST GSA-H60L Thermalright Silver Arrow SB-E Bitfenix Spectre Pro 200mm Phanteks 140mm 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
  hide details  
Reply
Mugen (Retired)
(20 items)
 
Mugen 2
(20 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE GIGABYTE GA-890GPA-UD3H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black DVD-RW HL-DT-ST GSA-H60L 
CoolingCoolingCoolingCooling
Thermalright Silve Arrow (TY-140/TY-150) Bitfenix Spectre Pro 200mm Phanteks 140mm Thermalright TY-150 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
CPUMotherboardGraphicsRAM
Intel i5 3570K GIGABYTE GA-Z77X-UD4H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Series SSD Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black 
Optical DriveCoolingCoolingCooling
DVD-RW HL-DT-ST GSA-H60L Thermalright Silver Arrow SB-E Bitfenix Spectre Pro 200mm Phanteks 140mm 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
  hide details  
Reply
post #847 of 4826
I have the stock 200mm front fan (for now) and then some GT ap-14's up top and ap-15 on my H70, and I have no real GPU issues in the case. I also have a non-ref MSI card.

current setup:
IMG_2091.jpg

I had a 120mm blowing on my GPUs (when I had a 6870CF) as seen in the above pic by Eric, but that was more of an issue with sandwiching of the sabertooth X58 not allowing much airflow between the cards.

To be honest, the airflow in this case for me is just fine. I have been considering going for the CM 200mm fan (higher cFM and lower dBA) butttt I just don't want the LEDs! hah.

Good luck in your decision!!
post #848 of 4826
1x200mm Antec BigBoy 133CFM - Front
2x140mm BGears Top Intake 104CFM each
1x 120mm Antec TriCool 76CFM

is my current setup, and temps aren't that bad after everything.
i7 Budget Dream
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 [D0] @ 4.00Ghz // 120x38mm Panaflo! Gigabyte EX58-UD3R [Rev 1.6] EVGA GTX 480 12GB @ 1600Mhz // G. Skill Sniper 
Hard DriveOSMonitorKeyboard
3.0TB Total (2x500 Raid0) Windows 7 - SP1 - 64-Bit Dell 24" (2410) Steelseries 6GV2 - Mechanical [Cherry Black] 
PowerCaseMouseAudio
Corsair 750TX Corsair 650D Razer Mamba HT Omega 7.1  
Other
Grado SR60i + SteelSeries Siberia V2 
  hide details  
Reply
i7 Budget Dream
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 [D0] @ 4.00Ghz // 120x38mm Panaflo! Gigabyte EX58-UD3R [Rev 1.6] EVGA GTX 480 12GB @ 1600Mhz // G. Skill Sniper 
Hard DriveOSMonitorKeyboard
3.0TB Total (2x500 Raid0) Windows 7 - SP1 - 64-Bit Dell 24" (2410) Steelseries 6GV2 - Mechanical [Cherry Black] 
PowerCaseMouseAudio
Corsair 750TX Corsair 650D Razer Mamba HT Omega 7.1  
Other
Grado SR60i + SteelSeries Siberia V2 
  hide details  
Reply
post #849 of 4826
Quote:
Originally Posted by nerdybeat;15209790 
I have the stock 200mm front fan (for now) and then some GT ap-14's up top and ap-15 on my H70, and I have no real GPU issues in the case. I also have a non-ref MSI card.

current setup:
~snip I had a 120mm blowing on my GPUs (when I had a 6870CF) as seen in the above pic by Eric, but that was more of an issue with sandwiching of the sabertooth X58 not allowing much airflow between the cards. To be honest, the airflow in this case for me is just fine. I have been considering going for the CM 200mm fan (higher cFM and lower dBA)butttt I just don't want the LEDs! hah.

Good luck in your decision!!

Ha, I don't want an LED fan either. That's why I was looking at that NZXT.
Quote:
Originally Posted by SmartedPAnda;15209840 
1x200mm Antec BigBoy 133CFM - Front
2x140mm BGears Top Intake 104CFM each
1x 120mm Antec TriCool 76CFM

is my current setup, and temps aren't that bad after everything.

I was also looking at that Antec fan. Do you use the included controller?

Thanks for the replies! Anyone else care to chime in? biggrin.gif I really appreciate the input. thumb.gif
Mugen (Retired)
(20 items)
 
Mugen 2
(20 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE GIGABYTE GA-890GPA-UD3H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black DVD-RW HL-DT-ST GSA-H60L 
CoolingCoolingCoolingCooling
Thermalright Silve Arrow (TY-140/TY-150) Bitfenix Spectre Pro 200mm Phanteks 140mm Thermalright TY-150 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
CPUMotherboardGraphicsRAM
Intel i5 3570K GIGABYTE GA-Z77X-UD4H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Series SSD Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black 
Optical DriveCoolingCoolingCooling
DVD-RW HL-DT-ST GSA-H60L Thermalright Silver Arrow SB-E Bitfenix Spectre Pro 200mm Phanteks 140mm 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
  hide details  
Reply
Mugen (Retired)
(20 items)
 
Mugen 2
(20 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE GIGABYTE GA-890GPA-UD3H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black DVD-RW HL-DT-ST GSA-H60L 
CoolingCoolingCoolingCooling
Thermalright Silve Arrow (TY-140/TY-150) Bitfenix Spectre Pro 200mm Phanteks 140mm Thermalright TY-150 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
CPUMotherboardGraphicsRAM
Intel i5 3570K GIGABYTE GA-Z77X-UD4H MSI R7870 Hawk CORSAIR XMS3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Series SSD Samsung 830 Series SSD Western Digital Caviar Black Western Digital Caviar Black 
Optical DriveCoolingCoolingCooling
DVD-RW HL-DT-ST GSA-H60L Thermalright Silver Arrow SB-E Bitfenix Spectre Pro 200mm Phanteks 140mm 
OSMonitorKeyboardPower
Windows 7 Professional BenQ GW2450 Microsoft Sidewinder x4 Corsair HX650 
CaseMouseAudioAudio
Corsair Obsidian 650D RAZER DeathAdder Focusrite Scarlett 8i6 M-Audio AV30 Studio Monitors (upgrading soon) 
  hide details  
Reply
post #850 of 4826
Quote:
Originally Posted by nerdybeat;15209790 
I have the stock 200mm front fan (for now) and then some GT ap-14's up top and ap-15 on my H70, and I have no real GPU issues in the case. I also have a non-ref MSI card.

current setup:

I had a 120mm blowing on my GPUs (when I had a 6870CF) as seen in the above pic by Eric, but that was more of an issue with sandwiching of the sabertooth X58 not allowing much airflow between the cards.

To be honest, the airflow in this case for me is just fine. I have been considering going for the CM 200mm fan (higher cFM and lower dBA) butttt I just don't want the LEDs! hah.

Good luck in your decision!!

so i have a question..so which are intake and which are exhaust? or did you keep the stock config?

i just bought this case tonight and will have a similar setup as you...and ive been very concerned about airflow and temps...i would really like to either get better temps than i do now or even better temps if possible...mind you im using a Storm Scout now and thing are cramped in there...but its using a 140 front intake, 2 120 side panel intakes, 1 140 top exhaust and push/pull on my H60 as exhaust...all noctua fans

2500k@1.36v idles in the high 20's to low 30's and loads in the low to mid 60's

R6950 idles 38-40 and loads at 58-62

really keeping those 2 things cool is my main priority when this new case comes
The Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.5ghz@1.3v Asus P8P67 MSI GTX980 Gaming 8GB G.Skill Sniper DDR3 1600 
Hard DriveOSMonitorKeyboard
Samsung F3 1TB,Seagate 500gb 7200.10 Windows 7 Ultimate x64 Samsung EX2220 Logitech Illuminated 
PowerCaseMouse
SeaSonic X-650 Corsair 650D Razer Mamba 
  hide details  
Reply
The Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.5ghz@1.3v Asus P8P67 MSI GTX980 Gaming 8GB G.Skill Sniper DDR3 1600 
Hard DriveOSMonitorKeyboard
Samsung F3 1TB,Seagate 500gb 7200.10 Windows 7 Ultimate x64 Samsung EX2220 Logitech Illuminated 
PowerCaseMouse
SeaSonic X-650 Corsair 650D Razer Mamba 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Corsair Obsidian 650D Mid-Tower