Sometime you need higher voltage on the 1055T to stable out at 4.0ghz.
|If it helps, I have deltas on my Hyper 212, just one right now not push pull anymore like my sig says, too loud, but anyways, when Im at 1.425v or higher and run stress testing it pushes the 60c threshhold and I usually end the test. Thats why Im at 3600mhz at 1.29 right now. But I idle at 17-21c with cool n quiet enabled. To be honest the Hyper 212's are great for x3 and x2's but x4 or higher is really pushing them. Im dying for a Megahalems right now!|
Any suggestions? I have thought about the H50, but I have read that it will not work well under longterm loads as the water cannot dissipate the heat fast enough. I do a lot of video transcoding that can run for 24 hours or more so that might be an issue (and the throttling slows the transcoding speed by more than half).
Edited by fball922 - 1/5/11 at 7:31pm