New Posts  All Forums:Forum Nav:

Laundromatic - Page 529  

post #5281 of 10523
Well only reason I would switch to using 102 baseclock would be to increase ram speed slightly and also if I found out that lower multi requires same or lower volts than higher multi.

Wish someone could confirm those two for me though, im thinking of running a 12 hr pass tonight and then hoping I have enough time to finish my 690 WU before end of TC. Anyone know exact time TC ends? 23:59 GMT or by american time?
post #5282 of 10523
Normally if you stable at say 49 on blck and you switch to 48 with bclk at 102 you will be stable on the same voltage.. it isnt much of a gain unless you want to push your ram past the 2133 but its only 40mhz.. I doubt it honestly worth it..

Dropping to 48 with 1.43vcore dropped my temps on the low fan speed to 75, which I am happy with. I am going to let it run alittle longer than possible move it to the other location in my house to see what temps there r like

The ram is alittle cooler not and so is the bridge.. So As long as its stable I think i will keep it the way it is.. I still plan on switching to IB once its accepting for my folding slot.. Which I hope will provide cooler temps, better energy use, and a better OC..

But for now I think it will be good
Edited by JMattes - 2/25/12 at 12:43pm
Liquid Blue
(18 items)
 
  
Liquid Blue
(18 items)
 
  
post #5283 of 10523
Quote:
Originally Posted by $ilent View Post

Well only reason I would switch to using 102 baseclock would be to increase ram speed slightly and also if I found out that lower multi requires same or lower volts than higher multi.
Wish someone could confirm those two for me though, im thinking of running a 12 hr pass tonight and then hoping I have enough time to finish my 690 WU before end of TC. Anyone know exact time TC ends? 23:59 GMT or by american time?
Grrr, we've talked about time zones before, but I just can't remember frown.gif
Turbulence
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k 4.4GHz Asus P8P67 Pro 3.1 HIS HD 7870 2GB G.SKILL Ripjaws X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128GB Samsung Spinpoint F3 1TB Asus DRW-24B1ST Noctua NH-D14 
CoolingOSMonitorKeyboard
Accelero Twin Turbo II Windows 7 Professional N Dell U2311H Realforce 87U White 55cN 
PowerCaseMouseMouse Pad
Corsair TX650V2 Fractal Design R3 Black Pearl Razer DeathAdder SteelSeries 4HD 
AudioAudioAudio
Audinst HUD-mx1 Beyerdynamic DT990 Premium 600 Ω Recabled M-Audio AV40 
  hide details  
Turbulence
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k 4.4GHz Asus P8P67 Pro 3.1 HIS HD 7870 2GB G.SKILL Ripjaws X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128GB Samsung Spinpoint F3 1TB Asus DRW-24B1ST Noctua NH-D14 
CoolingOSMonitorKeyboard
Accelero Twin Turbo II Windows 7 Professional N Dell U2311H Realforce 87U White 55cN 
PowerCaseMouseMouse Pad
Corsair TX650V2 Fractal Design R3 Black Pearl Razer DeathAdder SteelSeries 4HD 
AudioAudioAudio
Audinst HUD-mx1 Beyerdynamic DT990 Premium 600 Ω Recabled M-Audio AV40 
  hide details  
post #5284 of 10523
The TC runs on GMT, last time I looked.
Frigg d.y.
(23 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770K@4600MHz 1.288V ASUS P8Z68-V EVGA Geforce GTX780Ti@1293MHz 2x4GB G.Skill TrindentX 2400 CL10@2133 CL10 
Hard DriveHard DriveCoolingCooling
Corsair Force F60 2.5" SSD OCZ Agility 3 120GB 2.5" SSD EK-Supremacy CSQ Full Nickel EK-FC Titan Nickel CSQ 
CoolingCoolingCoolingCooling
Alphacool VPP655 w/ EK D5 X-Top Rev.2 EK-Coolstream Rad XTX 360 & XSPC RS240 Phobya Balancer 150 Reservoir 3xScythe GT AP-15@7V, 2xNexus Real Silent 120mm... 
OSOSMonitorMonitor
Linux Mint 16 64-bit Windows 7 64-bit Qix Qx2710LED Evolution II 2560x1440 Dell U2311H 1920x1080 
KeyboardPowerCaseMouse
Keycool 84 w/ Cherry MX Clear  Enermax Platimax 1500W NZXT H630 Func MS3 
Mouse PadAudioOther
Qpad Sweclockers Edition BRIK DAC & AMP Ducky DK9008G2 Pro w/ Cherry MX Clear  
  hide details  
Frigg d.y.
(23 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770K@4600MHz 1.288V ASUS P8Z68-V EVGA Geforce GTX780Ti@1293MHz 2x4GB G.Skill TrindentX 2400 CL10@2133 CL10 
Hard DriveHard DriveCoolingCooling
Corsair Force F60 2.5" SSD OCZ Agility 3 120GB 2.5" SSD EK-Supremacy CSQ Full Nickel EK-FC Titan Nickel CSQ 
CoolingCoolingCoolingCooling
Alphacool VPP655 w/ EK D5 X-Top Rev.2 EK-Coolstream Rad XTX 360 & XSPC RS240 Phobya Balancer 150 Reservoir 3xScythe GT AP-15@7V, 2xNexus Real Silent 120mm... 
OSOSMonitorMonitor
Linux Mint 16 64-bit Windows 7 64-bit Qix Qx2710LED Evolution II 2560x1440 Dell U2311H 1920x1080 
KeyboardPowerCaseMouse
Keycool 84 w/ Cherry MX Clear  Enermax Platimax 1500W NZXT H630 Func MS3 
Mouse PadAudioOther
Qpad Sweclockers Edition BRIK DAC & AMP Ducky DK9008G2 Pro w/ Cherry MX Clear  
  hide details  
post #5285 of 10523
Quote:
Originally Posted by JMattes View Post

Normally if you stable at say 49 on blck and you switch to 48 with bclk at 102 you will be stable on the same voltage.. it isnt much of a gain unless you want to push your ram past the 2133 but its only 40mhz.. I doubt it honestly worth it..
Dropping to 48 with 1.43vcore dropped my temps on the low fan speed to 75, which I am happy with. I am going to let it run alittle longer than possible move it to the other location in my house to see what temps there r like
The ram is alittle cooler not and so is the bridge.. So As long as its stable I think i will keep it the way it is.. I still plan on switching to IB once its accepting for my folding slot.. Which I hope will provide cooler temps, better energy use, and a better OC..
But for now I think it will be good

The amount of people I believe know are gonna switch to IB when its released is virtually a guarantee in my book that it will allowed, if a like for like swap. I.e 2500k-3570k and 26/700k for 3770k.

I am really looking forward to release of IB, im definitely gonna go buy one on release day, I usually buy from either Overclockers or CCL. Problem is CCL not that great and I dont think theyll have IB in on release day, so I might just drive to Overclockers which is couple hours drive for me, but hey ho its fun!

I would queue up at midnight if I could just like i do for some 360 releases.
Edited by $ilent - 2/25/12 at 12:50pm
post #5286 of 10523
Im going to wait acouple days to see how the results are and make sure they are allowed for i7-2 folding..

I will also have to figure out a wayto check oc and voltages on the dedi before swapping out chips. I may have to figure it out on my gaming rig first for a ball park then take my dedi down for a day and run some tests.. we will see when that day comes
.
So with no open windows my max is 80/81. With open windows it drops dramatically. Looking at about a 10c drop with the windows decently open. Wish i couls always leave windows open..

Im going to stop folding for like 20 or so mibs to run prime blend on my rig to see if how much temps increase on prime over folding
Ill report my findings for anyone interested.

Scratch that... the workers keep failing.. Guessing my RAM isnt stable on my gaming rig ATM...

How long should i prime blend for on my folding rig before declaring it stable??
Edited by JMattes - 2/25/12 at 3:26pm
Liquid Blue
(18 items)
 
  
Liquid Blue
(18 items)
 
  
post #5287 of 10523
Quote:
Originally Posted by JMattes View Post

Im going to wait acouple days to see how the results are and make sure they are allowed for i7-2 folding..

I will also have to figure out a wayto check oc and voltages on the dedi before swapping out chips. I may have to figure it out on my gaming rig first for a ball park then take my dedi down for a day and run some tests.. we will see when that day comes
.

sensors should put out some readings. If not follow this post: http://www.overclock.net/t/1153663/solved-linux-lm-sensors-and-ubuntu-10-10#post_15482281 This lets me see temperatures, but not voltage readings (on my Sandy).
Quote:
Originally Posted by JMattes View Post

So with no open windows my max is 80/81. With open windows it drops dramatically. Looking at about a 10c drop with the windows decently open. Wish i couls always leave windows open..

Im going to stop folding for like 20 or so mibs to run prime blend on my rig to see if how much temps increase on prime over folding
Ill report my findings for anyone interested.

Scratch that... the workers keep failing.. Guessing my RAM isnt stable on my gaming rig ATM...

How long should i prime blend for on my folding rig before declaring it stable??

I think I let my TC rig do ~6h of OCCT. Then watching the rig closely for the first week I had to slightly tune voltages.
Frigg d.y.
(23 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770K@4600MHz 1.288V ASUS P8Z68-V EVGA Geforce GTX780Ti@1293MHz 2x4GB G.Skill TrindentX 2400 CL10@2133 CL10 
Hard DriveHard DriveCoolingCooling
Corsair Force F60 2.5" SSD OCZ Agility 3 120GB 2.5" SSD EK-Supremacy CSQ Full Nickel EK-FC Titan Nickel CSQ 
CoolingCoolingCoolingCooling
Alphacool VPP655 w/ EK D5 X-Top Rev.2 EK-Coolstream Rad XTX 360 & XSPC RS240 Phobya Balancer 150 Reservoir 3xScythe GT AP-15@7V, 2xNexus Real Silent 120mm... 
OSOSMonitorMonitor
Linux Mint 16 64-bit Windows 7 64-bit Qix Qx2710LED Evolution II 2560x1440 Dell U2311H 1920x1080 
KeyboardPowerCaseMouse
Keycool 84 w/ Cherry MX Clear  Enermax Platimax 1500W NZXT H630 Func MS3 
Mouse PadAudioOther
Qpad Sweclockers Edition BRIK DAC & AMP Ducky DK9008G2 Pro w/ Cherry MX Clear  
  hide details  
Frigg d.y.
(23 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770K@4600MHz 1.288V ASUS P8Z68-V EVGA Geforce GTX780Ti@1293MHz 2x4GB G.Skill TrindentX 2400 CL10@2133 CL10 
Hard DriveHard DriveCoolingCooling
Corsair Force F60 2.5" SSD OCZ Agility 3 120GB 2.5" SSD EK-Supremacy CSQ Full Nickel EK-FC Titan Nickel CSQ 
CoolingCoolingCoolingCooling
Alphacool VPP655 w/ EK D5 X-Top Rev.2 EK-Coolstream Rad XTX 360 & XSPC RS240 Phobya Balancer 150 Reservoir 3xScythe GT AP-15@7V, 2xNexus Real Silent 120mm... 
OSOSMonitorMonitor
Linux Mint 16 64-bit Windows 7 64-bit Qix Qx2710LED Evolution II 2560x1440 Dell U2311H 1920x1080 
KeyboardPowerCaseMouse
Keycool 84 w/ Cherry MX Clear  Enermax Platimax 1500W NZXT H630 Func MS3 
Mouse PadAudioOther
Qpad Sweclockers Edition BRIK DAC & AMP Ducky DK9008G2 Pro w/ Cherry MX Clear  
  hide details  
post #5288 of 10523
Thanks Avri!

I updated the kernel and i need to do the web config and the hfm.. than ill see how.it.runs

Can u type.out what i need to.do with the sensors? I looked at thread tried acouple lines of.code and nothing works. It alittle over my head honestly

Seems like my HFM is up showing 38k PPD.. was hoping to see my in Native Linux..

If anyone has any advice or tips I am all ears!

Thanks guys!!

So I am watching my PPD and its starts at 38k and I am like well I guess thats ok..
Then it goes to 37.8k and I am like cool it fluxes maybe it will go up..
Then it goes to 24k and im like wth!!
Then it goes to 23k and I am like wait a minute here..

I restart it and go into the bios and make sure it is still OC.. It is.. So it reboots and the % goes back to 05 @ 37.k... Lets see what happens..

Where is everyone today? Just because its a Saturday and we all have lives doesnt mean we cant come on and chat lol
Edited by JMattes - 2/25/12 at 6:54pm
Liquid Blue
(18 items)
 
  
Liquid Blue
(18 items)
 
  
post #5289 of 10523
Did you install BFS and closed all windows?
Captain Crunch
(12 items)
 
  
CPUMotherboardGraphicsGraphics
3770k @ 4.6Ghz Asus Z77 Sabertooth EVGA GeForce GTX 660 Ti FTW+ 3GB w/Backplate (SLI) Waiting For GTX 780  
RAMHard DriveCoolingOS
Samsung 2133Mhz 10-10-10-28 1T OCZ SSD Corsair H100 P/P Windows 7 
MonitorKeyboardPowerCase
Monoprice 2560x1440p Ducky Shine Corsair AX1200 Cooler Master 690 
  hide details  
Captain Crunch
(12 items)
 
  
CPUMotherboardGraphicsGraphics
3770k @ 4.6Ghz Asus Z77 Sabertooth EVGA GeForce GTX 660 Ti FTW+ 3GB w/Backplate (SLI) Waiting For GTX 780  
RAMHard DriveCoolingOS
Samsung 2133Mhz 10-10-10-28 1T OCZ SSD Corsair H100 P/P Windows 7 
MonitorKeyboardPowerCase
Monoprice 2560x1440p Ducky Shine Corsair AX1200 Cooler Master 690 
  hide details  
post #5290 of 10523
I installed the kernal with BFS. built in.. Am I suppose to install it on my gaming rig too? What do you mean close all the windows? Its a Native Linux OS.. theres no windows to close.. I was watching the drop on the HFM

Now its at 9% with 23k... I dont know whats going on...

I cant really fix this tonight.. I hope it keeps running till tomorrow morning.. If you guys could post advice I would appreciate it..
Liquid Blue
(18 items)
 
  
Liquid Blue
(18 items)
 
  
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Team Competition
This thread is locked