Well things got slow at work today so i had some extra time to work on it again. I welded and trim the front panel in. Built a dual hard drive cage, and a 5 1/4" drive bay, marked and drilled all the motherboard holes in the tray i cut earlier. I mounted them and did a test fit with a broken cd drive.
empty shot after i was done.
front view with old drive.
side view with drive and mobo tray to the side.
Then i took a shot from the back with the cd drive in, and a old psu to see how well the inside parts are going to show up when done.
so far so good. i have to mount the tray, install stand off's, and install my mobo, and mark up the back plate and cut it. i am going to use part of an old case back plate for the io plate holder and pci bracket mounts. i also have to cut and mount my psu to the back plate.
thanks for watching.