Overclock.net › Forums › Intel › Intel CPUs › i7 930 problem
New Posts  All Forums:Forum Nav:

i7 930 problem

post #1 of 7
Thread Starter 
porco dio
i have a problem with my new system
(i have an UD7, ram corsair dominator @ 1600mhz and i7930)
it is rock solid at 4ghz with 1,232v but when i try to increase, even slightly, the frequence the system becomes instable, it can't even load w7

where do i get wrong?

p.s. i did not change only the vcore but also the others voltages,
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 DO DFI DK t3he6 GTX275 CORSAIR dominator 6GB 
Hard DriveOSCase
150 GB velociraptor+ 1TB SEAGATE Windows 7 64 bit HAF 922 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 DO DFI DK t3he6 GTX275 CORSAIR dominator 6GB 
Hard DriveOSCase
150 GB velociraptor+ 1TB SEAGATE Windows 7 64 bit HAF 922 
  hide details  
Reply
post #2 of 7
if you're already stable then why are you increasing voltages...
post #3 of 7
Thread Starter 
Quote:
Originally Posted by kiwiasian View Post
if you're already stable then why are you increasing voltages...
because i want an higher frequence!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 DO DFI DK t3he6 GTX275 CORSAIR dominator 6GB 
Hard DriveOSCase
150 GB velociraptor+ 1TB SEAGATE Windows 7 64 bit HAF 922 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 DO DFI DK t3he6 GTX275 CORSAIR dominator 6GB 
Hard DriveOSCase
150 GB velociraptor+ 1TB SEAGATE Windows 7 64 bit HAF 922 
  hide details  
Reply
post #4 of 7
I suggest you take a look at the following link: http://hardforum.com/showthread.php?t=1502931

The second post contains a lot of good information on overclocking Core i7 920s and 930s. It may help you out with reaching your goal.

Just to let you know, CPUz shows my i7 930 using 1.285 volts when at 100% load at 4.085 GHz with HT on.
    
CPUMotherboardGraphicsRAM
Core i7 930 (4.085 GHz) EVGA X58 SLI LE EVGA Superclocked GTX 570 6GB (3x2GB) Crucial Ballistix DDR3 1600MHz 
Hard DriveOptical DriveCoolingOS
64GB Corsair P3 SSD, 1TB WD Black, 500GB Seagate LG Blu-Ray Burner Custom Watercooling Windows 7 Professional x64 
MonitorMonitorKeyboardPower
Dell 1920x1080 Acer 1680x1050 $15 Logitech Keyboard Corsair TX950w 
CaseMouse
Coolermaster HAF X Logitech G5 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 930 (4.085 GHz) EVGA X58 SLI LE EVGA Superclocked GTX 570 6GB (3x2GB) Crucial Ballistix DDR3 1600MHz 
Hard DriveOptical DriveCoolingOS
64GB Corsair P3 SSD, 1TB WD Black, 500GB Seagate LG Blu-Ray Burner Custom Watercooling Windows 7 Professional x64 
MonitorMonitorKeyboardPower
Dell 1920x1080 Acer 1680x1050 $15 Logitech Keyboard Corsair TX950w 
CaseMouse
Coolermaster HAF X Logitech G5 
  hide details  
Reply
post #5 of 7
Quote:
Originally Posted by moritzplatz View Post
because i want an higher frequence!
you want a higher clock frequency?
are you also turning up fsb/bclk?
post #6 of 7
Quote:
Originally Posted by kiwiasian View Post
you want a higher clock frequency?
are you also turning up fsb/bclk?
seems pretty obvious that is what he is wanting...

Op here is some BSOD i7 codes, hope these help:

BSOD Codes
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0X109 = Not enough or too Much memory voltage
post #7 of 7
Quote:
Originally Posted by $ilent View Post
seems pretty obvious that is what he is wanting...

Op here is some BSOD i7 codes, hope these help:

BSOD Codes
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0X109 = Not enough or too Much memory voltage
This is really good info, but I think the OPs problem is that at any higher Bclk(FSB) he is unable to load into windows.

This to me would seem like the board may have reached the maximum Bclk(FSB) that it is going to go. A way to correct this problem, maybe, is to raise your IOH .05v(up to ~1.3v max) and then try too boot into windows. Also if you Uclk is higher the 2x your ram speed decrease it to 2x.

A lot of x58 boards don't want to go above 200Bclk(FSB) and a lot of times you really can't go higher than 4Ghz as a result. If you are currently at 21x191 one thing you can try to do is up the multiplier to 22x(Full time not turbo), I know Rampage boards can do this although I am unsure about yours.
Edited by tconroy135 - 1/7/11 at 11:52am
Mixed Bag
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 6950X 4600Mhz ASUS Rampage V Edition 10 1080 Ti FE HyperX 12-13-13 @2400Mhz 
Hard DriveCoolingOSMonitor
Samsung 850 EVO Corsair H100i GTX Windows 10 x64 ASUS ROG PG279Q Black 27" 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA SuperNOVA 1000 P2 Corsair Air 540 Corsair RGB 
Mouse Pad
Some naked Anime with a plump butt 
  hide details  
Reply
Mixed Bag
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 6950X 4600Mhz ASUS Rampage V Edition 10 1080 Ti FE HyperX 12-13-13 @2400Mhz 
Hard DriveCoolingOSMonitor
Samsung 850 EVO Corsair H100i GTX Windows 10 x64 ASUS ROG PG279Q Black 27" 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA SuperNOVA 1000 P2 Corsair Air 540 Corsair RGB 
Mouse Pad
Some naked Anime with a plump butt 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i7 930 problem