Overclock.net › Forums › Intel › Intel Motherboards › Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22**
New Posts  All Forums:Forum Nav:

Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22** - Page 158

post #1571 of 3000
Quote:
Originally Posted by Jen;12975387 
is there any information as to the changes to the p8p67-m (805) bios? the 0702 has a multiplier problem that i found and speedstep that isnt working when overclocked even though its set as enabled on C states and Speedstep

Jen

ASUS' website has zero BIOS downloads for your motherboard.
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
post #1572 of 3000
Quote:
Originally Posted by ____;12965257 
I just installed the B3 motherboard.
My system was already pretty unlucky, only being able to pull 4.5Ghz at 1.32v, Windows not even starting at 1.29v. Now it's even worse, Prime keeps crashing (sometimes BSOD), even when I'm doing 1.34v. I'm slowly working my way up.

Also, my clock won't sync. It keeps saying "Unable to start the Windows Time service. Please try again later." I tried manually turning it on in task manager, but the clock still won't sync. My old laptop can still do it.

Help would be greatly appreciated.

How are you setting the voltage? Manual voltage or offset? PPL setting? BCLK?

Don't touch BCLK, leave it on 100. Change "Phase Control" and "Duty Control" to Extreme. If you use manual CPU voltage, set PPL to Ultra High. If you use off set, set PPL to regular.

With those setting, my 2600k is stable at 1.28V using manual, and offset + 0.03 using offset. You may want to try adding 0.02-0.03 to CPU voltage on top of those settings to start with, and gradually lower it if they work. Also try enabling Intel PPL Overvoltage, that usually helps for OC 4.7Ghz+ but people said it is no needed for below 4.7Ghz.

It'd be helpful if you report what your CPU voltage actually is when running stress test and when idle (use CPU-Z or ASUS Suite II to see).
Edited by khtse - 4/2/11 at 5:01pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.5Ghz ASUS P8P67 Deluxe EVGA 670 GTX 4GB 4 x 8GB Corsair Vengeance 
Hard DriveOSMonitorMouse
Samsung 830 256GB SSD Windows 7 Professional 64-bit Dell 2407WFP-HC Logitech MX Revolution 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.5Ghz ASUS P8P67 Deluxe EVGA 670 GTX 4GB 4 x 8GB Corsair Vengeance 
Hard DriveOSMonitorMouse
Samsung 830 256GB SSD Windows 7 Professional 64-bit Dell 2407WFP-HC Logitech MX Revolution 
  hide details  
Reply
post #1573 of 3000
Quote:
Originally Posted by BigFrank;12976453 
ASUS' website has zero BIOS downloads for your motherboard.

this one evidently that just got posted is beta but no changelog is given so i dont know has been done

Jen
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500K ECS H67H2-I Palit 560Ti Crucial 8GB Pc1333 DDR3 
Hard DriveOptical DriveOSMonitor
128 GB SSD and 2 TB Samsung Asus BD Burner Windows 7 64 Dell 27 inch 
PowerCase
Silverstone SFX 450 Lian Li PCQ07 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500K ECS H67H2-I Palit 560Ti Crucial 8GB Pc1333 DDR3 
Hard DriveOptical DriveOSMonitor
128 GB SSD and 2 TB Samsung Asus BD Burner Windows 7 64 Dell 27 inch 
PowerCase
Silverstone SFX 450 Lian Li PCQ07 
  hide details  
Reply
post #1574 of 3000
Quote:
Originally Posted by khtse;12976796 
How are you setting the voltage? Manual voltage or offset? PPL setting? BCLK?

Don't touch BCLK, leave it on 100. Change "Phase Control" and "Duty Control" to Extreme. If you use manual CPU voltage, set PPL to Ultra High. If you use off set, set PPL to regular.

With those setting, my 2600k is stable at 1.28V using manual, and offset + 0.03 using offset. You may want to try adding 0.02-0.03 to CPU voltage on top of those settings to start with, and gradually lower it if they work. Also try enabling Intel PPL Overvoltage, that usually helps for OC 4.7Ghz+ but people said it is no needed for below 4.7Ghz.

It'd be helpful if you report what your CPU voltage actually is when running stress test and when idle (use CPU-Z or ASUS Suite II to see).
Quote:
Originally Posted by ____;12975943 
I have mine at +.10v, LLC High (50%). It gives me .98V at 1.6GHz, and 1.312V at 4.5GHz.

Every time I change bios, it fluctuates a little bit, and when I switched to the B3 revision, it changed a lot (I used to have it at +.30 for the same voltages).

My system doesn't get past the glowing windows logo below 1.3v.
So Saxy I Jazzed
(14 items)
 
  
CPUMotherboardGraphicsRAM
IBM i7 2600k Gigabyte P8P67 Deluxe Sapphire GTX 580 SC Mushkin Ripjaw 2x4GB 
Hard DriveOptical DriveCoolingOS
Crucial X25-M 120GB SSD + 1TB Seagate Caviar Black '00 Honda Civic Corsair CNPS 9900 MAX-B Mac OS7 Ultimate x64 
MonitorKeyboardPowerCase
LG E2360 overclocked to 120Hz Ultimate Nerd Cred Clicky Blanks Antec AX750 Cooler Master PC-B25FWB 
MouseMouse Pad
Razer G9x My desk 
  hide details  
Reply
So Saxy I Jazzed
(14 items)
 
  
CPUMotherboardGraphicsRAM
IBM i7 2600k Gigabyte P8P67 Deluxe Sapphire GTX 580 SC Mushkin Ripjaw 2x4GB 
Hard DriveOptical DriveCoolingOS
Crucial X25-M 120GB SSD + 1TB Seagate Caviar Black '00 Honda Civic Corsair CNPS 9900 MAX-B Mac OS7 Ultimate x64 
MonitorKeyboardPowerCase
LG E2360 overclocked to 120Hz Ultimate Nerd Cred Clicky Blanks Antec AX750 Cooler Master PC-B25FWB 
MouseMouse Pad
Razer G9x My desk 
  hide details  
Reply
post #1575 of 3000
Quote:
Originally Posted by ____;12978039 
My system doesn't get past the glowing windows logo below 1.3v.

Don't play with offset yet, and don't set LLC to High when using offset. If you use Auto or Manual to set CPU voltage. You are setting the CPU idle voltage, your CPU voltage at full load will be lower and that's call vdroop. LLC is a setting to minimize vdroop by giving more voltage to the CPU when load is higher.

But if you set voltage by using offset, the load voltage will be higher than the idle voltage. In this case, with the same offset, the higher LLC you set, the higher the difference between idle and load voltage. So if you have chosen a setting that give enough voltage to the CPU for it to be stable under full load, the CPU may not be getting enough voltage when idle or less-than-full load. Your PC will be rebooting at random and crashes while surfing the web.

Instead of using offset. Set CPU voltage by using manual first. Set PPL to Ultra High, instead of High, this minimize Vdroop and keep idle and load voltage very close (don't use Extreme LLC, that makes my system unstable). Use this PPL setting to determine the minimize constant voltage that your CPU need to sustain at full load. Once you got that value, THEN you go play with offset. When using offset, set LLC to regular, and find the offset value that gives you the amount of voltage you determined earlier to your CPU when full load. Only if you find your PC completely stable, and think that the idle voltage can be even lower, you increase your LLC settings.

Also, set "Phase Control" and "Duty Control" to Extreme. Turn on "Intel PPL Overvoltage".
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.5Ghz ASUS P8P67 Deluxe EVGA 670 GTX 4GB 4 x 8GB Corsair Vengeance 
Hard DriveOSMonitorMouse
Samsung 830 256GB SSD Windows 7 Professional 64-bit Dell 2407WFP-HC Logitech MX Revolution 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.5Ghz ASUS P8P67 Deluxe EVGA 670 GTX 4GB 4 x 8GB Corsair Vengeance 
Hard DriveOSMonitorMouse
Samsung 830 256GB SSD Windows 7 Professional 64-bit Dell 2407WFP-HC Logitech MX Revolution 
  hide details  
Reply
post #1576 of 3000
Is it necessary to update the BIOS on the Pro? I got my board last Friday and it came pre installed with 1401. I see that there's a 15xx on the front page for my board.
Cookie Monster
(13 items)
 
  
CPUMotherboardGraphicsRAM
i-5 2500K 4.8GHz @ 1.38v ASUS P8P67 Pro GTX 470 Performance Edition G.Skill Ripjaws X DDR3 8GB 1600 
Hard DriveOSMonitorKeyboard
750 GB Seagate Barracuda 7200 Windows Home Premium 64 Bit 27 inch Samsung/23 inch Acer Logitech G15 
PowerCaseMouse
Corsair TX850 CM HAF X Logitech G9 
  hide details  
Reply
Cookie Monster
(13 items)
 
  
CPUMotherboardGraphicsRAM
i-5 2500K 4.8GHz @ 1.38v ASUS P8P67 Pro GTX 470 Performance Edition G.Skill Ripjaws X DDR3 8GB 1600 
Hard DriveOSMonitorKeyboard
750 GB Seagate Barracuda 7200 Windows Home Premium 64 Bit 27 inch Samsung/23 inch Acer Logitech G15 
PowerCaseMouse
Corsair TX850 CM HAF X Logitech G9 
  hide details  
Reply
post #1577 of 3000
Quote:
Originally Posted by Famousoverdose;12979317 
Is it necessary to update the BIOS on the Pro? I got my board last Friday and it came pre installed with 1401. I see that there's a 15xx on the front page for my board.

Nope. If you are not having problems stick to 1401 BIOS. Once we get more feedback from people I will update.
post #1578 of 3000
Quote:
Originally Posted by Famousoverdose;12979317 
Is it necessary to update the BIOS on the Pro? I got my board last Friday and it came pre installed with 1401. I see that there's a 15xx on the front page for my board.

No necessary. But I flashed my BIOS to the newer 1502 BIOS, and It allowed me to get a higher overclock without having to push my voltage as high. It's really up to you like Iching said.
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
post #1579 of 3000
Can anybody with a steelseries xai mouse check and confirm if boot is prolonged? I haven't returned my mobo for B3 revision yet, and I'm thinking of changing it for a P8P67 or P8P67 Pro, IF there aren't any problems with xai.

I've seriously had enough of it, when the mouse is connected boot lasts for around 120 seconds, and without it connected it's around 15-20 seconds...
l9l
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600K 4.5GHz MSI P67A-C45 MSI GTX 970 GAMING 4G Kingston HyperX Beast 16GB 2133MHz 
Hard DriveOptical DriveOSMonitor
Western Digital 1TB + Samsung 840 250GB + Samsu... Samsung 223C Win7 64bit Ultimate ASUS MG278Q + Samsung 2233RZ 
KeyboardPowerCaseMouse
Steelseries 6Gv2 Silverstone Strider Plus 750W CM 690 II Microsoft WMO 
Mouse Pad
Steelseries QcK Heavy 
  hide details  
Reply
l9l
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600K 4.5GHz MSI P67A-C45 MSI GTX 970 GAMING 4G Kingston HyperX Beast 16GB 2133MHz 
Hard DriveOptical DriveOSMonitor
Western Digital 1TB + Samsung 840 250GB + Samsu... Samsung 223C Win7 64bit Ultimate ASUS MG278Q + Samsung 2233RZ 
KeyboardPowerCaseMouse
Steelseries 6Gv2 Silverstone Strider Plus 750W CM 690 II Microsoft WMO 
Mouse Pad
Steelseries QcK Heavy 
  hide details  
Reply
post #1580 of 3000
Do we lose our oc profiles on a bios flash?
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22**