Overclock.net › Forums › Intel › Intel Motherboards › Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22**
New Posts  All Forums:Forum Nav:

Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22** - Page 268

post #2671 of 3000
Quote:
Originally Posted by mc conor View Post

I run LLC on regular (0%). I am prime stable @1.296V but idle voltages can go below 0.7V @16x multi and eventually BSODs. so I have to compensate with slightly more VCore.
I though the issue with these boards was pretty prominent?
0.7v sounds very low ,here is a little offset guide that might fit your bill
http://rog.asus.com/forum/showthread.php?2162-Overclocking-Using-Offset-Mode-for-CPU-Core-Voltage
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #2672 of 3000
Thanks for the p.m. sent u this message:

CPU: i5 2500k @4.5GHz
RAM: 2 x 4GB Corsair Dominator @1600MHz
MB: Asus p8p67 Pro rev 3.1 1704 BIOS


Bios Settings:

AI OC Tuner: Manual
BLCK: 100
Turbo: By all cores 45
Internal PLL Overvolt: Disabled
Memfreq: 1600MHz
EPU Power Saving: Disabled


Load Line Calibration: Regular (0%)
VRM: Manual @350
Phase Control: Extreme
Duty Control: Extreme
CPU Current: 100%

CPU Voltage 1.224 - 1.232
Offset Mode: + 0.03

DRAM: 1.5V
VCSSA: 0.925 [AUTO]
VCCIO: 1.056 -65 [AUTO]
CPU PLL: 1.793 [AUTO]
PCH Voltage: 1.05 [AUTO]
CPU Spread Spectrum: [AUTO]

I am not completely sure of the Offset off my head but it yields a max Vcore in BF3 of 1.36V

Load is about 1.312 in prime.

I thought many people had issues with these board with c3 and c6 enabled and the strange idle BSOD and low speedstep VCORE. Do you not have any of these issues?
post #2673 of 3000
Quote:
Originally Posted by mc conor View Post

Yes I am running offset mode. So how is 2103 what did you notice it change, or make more stable?
I have previously but It messed up with my raid array speeds and obviously ran hotter at idle and used more power.
It's not really a big issue, it's just I am wondering if the way the idle voltages artificially went so low was maybe a BIOS problem, and the way they said that there is a stability tweaks in this version maybe it got fixed.

well thats what causes the bsod from wht i read when using offset c3 and c6 will cause a bsod when the vcore drops. Atleast on my sabertooth i get same temps with or without c3 and c6 my vcore and cpu speed still drops.
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
post #2674 of 3000
Quote:
Originally Posted by mc conor View Post

Thanks for the p.m. sent u this message:
CPU: i5 2500k @4.5GHz
RAM: 2 x 4GB Corsair Dominator @1600MHz
MB: Asus p8p67 Pro rev 3.1 1704 BIOS
Bios Settings:
AI OC Tuner: Manual
BLCK: 100
Turbo: By all cores 45
Internal PLL Overvolt: Disabled
Memfreq: 1600MHz
EPU Power Saving: Disabled
Load Line Calibration: Regular (0%)
VRM: Manual @350
Phase Control: Extreme
Duty Control: Extreme
CPU Current: 100%
CPU Voltage 1.224 - 1.232
Offset Mode: + 0.03
DRAM: 1.5V
VCSSA: 0.925 [AUTO]
VCCIO: 1.056 -65 [AUTO]
CPU PLL: 1.793 [AUTO]
PCH Voltage: 1.05 [AUTO]
CPU Spread Spectrum: [AUTO]
I am not completely sure of the Offset off my head but it yields a max Vcore in BF3 of 1.36V
Load is about 1.312 in prime.
I thought many people had issues with these board with c3 and c6 enabled and the strange idle BSOD and low speedstep VCORE. Do you not have any of these issues?

Ok i don't usually run x45 but this is what i did just for fun ;
I had to figure out what was my stable Vcore under Manual/fixed in bios (run P95 1344/1792 stress test 15~25 min)
Bios Settings:
AI OC Tuner: Manual
BLCK: 100
Turbo: per core 45
Internal PLL Overvolt: Disabled
EPU Power Saving: Disabled
Load Line Calibration: Ultra High
VRM: Manual @350
Phase Control: Extreme
Duty Control: Extreme
CPU Current: 100%
CPU Voltage 1.31v (in bios) and CPU-Z fluctuation of (1.296~1.304v)-STABLE
Turbo ;Enabled
CPU Ratio ;Auto
c1,3,6;Enabled
CPU Spread Spectrum: DISABLE

Next was the offset (funny thing is my +value came out same as yours )
Idle under offset mode
idlex45regulatoffset03.png

Bios settings;
120219232201.png

Test (CPU-Z fluctuation under load 1.296~1.312v-surprisingly small for LLC -Regular )
loadx45regularoffset03.png

I also did LLC-Medium +.01 which give me Idle .992v and Vcore in CPU-Z (1.304~1.320v)

Clear CMOS and try this settings ,if your Idle is still around .700v i would say your MB or CPU is a dude
Edited by coolhandluke41 - 2/19/12 at 9:57pm
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #2675 of 3000
Quote:
Originally Posted by mc conor View Post

I run LLC on regular (0%). I am prime stable @1.296V but idle voltages can go below 0.7V @16x multi and eventually BSODs. so I have to compensate with slightly more VCore.
I though the issue with these boards was pretty prominent?

Have you ever tried CPU VOLTAGE MANUAL MODE & CPU VOLTAGE AUTO ? The first thing i did after getting my rig was to upgrade to 2103 with a USB. I never use OFFSET mode, I used it on a few OC tries, never encountered an idle BSOD thou but I remember disabling c3 and c6 because I don't use a raid. Your options are using Manual Mode or offset mode with a slight increase.
Intel Evilnow
(18 items)
 
   
CPUMotherboardGraphicsRAM
i5 2500k 4ghz @ Offset -0.015 Asus P8P67 Evo (bios 3207) Sapphire 280x Tri-x 3GB OC (Stock 1020/1500 Non... G.Skill RipjawsX 2x4gb 1866mhz 9-10-9-28-2n @ 1.5v 
Hard DriveHard DriveHard DriveHard Drive
SHSS37A120G WD5000AAKX-001CA0 WD20EARX WD20EZRZ 
Hard DriveOptical DriveCoolingOS
WD5001AALS-00L3B2 (Now External) ASUS DRW-1814BLT Noctua NH-u12p SE2 Windows 10 Pro 
MonitorKeyboardPowerCase
Asus VH242H Wobbly Stand :) Microsoft Ergo 4000 Enermax Infiniti 650 (28a,28a,30a) Cooler Master haf 912 Advanced 
MouseOther
A4tech x7 F3 Sunbeam RHK-EX-BA Rheobus-Extreme Fan Controlle... 
CPUMotherboardGraphicsRAM
Phenom II x6 1090t BE 3.6/4.0 Turbo@def.volt MSI K9A2 Platinum v1 Sapphire HD6850 1GB 850/1100@def.volt Kingston 2x2gb Hyperx 1066 5-5-5-15 
Hard DriveHard DriveOptical DriveOS
Western Digital WD5001AALS Seagate Barracuda ST3250410AS Asus DRW-1814BLT Windows 7 Ultimate x64 SP1 
MonitorKeyboardPowerCase
Asus VH242H 23.6" Wobbly Stand :D Microsoft Ergo 4000 Enermax Infiniti 650w (28a,28a,30a) Thermaltake Kandalf SuperTower 
Mouse
A4 tech Swop-3 
  hide details  
Reply
Intel Evilnow
(18 items)
 
   
CPUMotherboardGraphicsRAM
i5 2500k 4ghz @ Offset -0.015 Asus P8P67 Evo (bios 3207) Sapphire 280x Tri-x 3GB OC (Stock 1020/1500 Non... G.Skill RipjawsX 2x4gb 1866mhz 9-10-9-28-2n @ 1.5v 
Hard DriveHard DriveHard DriveHard Drive
SHSS37A120G WD5000AAKX-001CA0 WD20EARX WD20EZRZ 
Hard DriveOptical DriveCoolingOS
WD5001AALS-00L3B2 (Now External) ASUS DRW-1814BLT Noctua NH-u12p SE2 Windows 10 Pro 
MonitorKeyboardPowerCase
Asus VH242H Wobbly Stand :) Microsoft Ergo 4000 Enermax Infiniti 650 (28a,28a,30a) Cooler Master haf 912 Advanced 
MouseOther
A4tech x7 F3 Sunbeam RHK-EX-BA Rheobus-Extreme Fan Controlle... 
CPUMotherboardGraphicsRAM
Phenom II x6 1090t BE 3.6/4.0 Turbo@def.volt MSI K9A2 Platinum v1 Sapphire HD6850 1GB 850/1100@def.volt Kingston 2x2gb Hyperx 1066 5-5-5-15 
Hard DriveHard DriveOptical DriveOS
Western Digital WD5001AALS Seagate Barracuda ST3250410AS Asus DRW-1814BLT Windows 7 Ultimate x64 SP1 
MonitorKeyboardPowerCase
Asus VH242H 23.6" Wobbly Stand :D Microsoft Ergo 4000 Enermax Infiniti 650w (28a,28a,30a) Thermaltake Kandalf SuperTower 
Mouse
A4 tech Swop-3 
  hide details  
Reply
post #2676 of 3000
Quote:
Originally Posted by Bal3Wolf View Post

You dont need to bump vcore you just need to turn off c3 and c6 and that will fix it and it will stil have idle volts and lower clocks.

I sure hope this is it for me. I recently went to 2103 as I had issues with a Crucial SSD and I can Prime+superpi for hours while encoding with handbrake...but come home from work and it's crashed. Had to bump Vcore to 1.36 and crank LLC to extreme to get some margin of stability with 2103 at 4.5 GHz as well.
donut
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i3/i5/i7 Asus Sabertooth P67 GTX 680 GTX 680 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaws 4x4  Crucial m4 Intel 320 WD Caviar Black 
Hard DriveHard DriveOptical DriveOptical Drive
Seagate Barracuda samsung 840 evo 750  LG BR-RW LiteOn DVD-R 
CoolingOSMonitorMonitor
H2O W7P 64 bit Dell 2412 Dell 2412 
MonitorPowerCase
Dell 2412 Corsair ax1200i COSMOS 
  hide details  
Reply
donut
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i3/i5/i7 Asus Sabertooth P67 GTX 680 GTX 680 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaws 4x4  Crucial m4 Intel 320 WD Caviar Black 
Hard DriveHard DriveOptical DriveOptical Drive
Seagate Barracuda samsung 840 evo 750  LG BR-RW LiteOn DVD-R 
CoolingOSMonitorMonitor
H2O W7P 64 bit Dell 2412 Dell 2412 
MonitorPowerCase
Dell 2412 Corsair ax1200i COSMOS 
  hide details  
Reply
post #2677 of 3000
try relaxing your ram settings, rather crank up the vcore...
post #2678 of 3000
Just an FYI, I tried downloading the Bluetooth drivers for the P8P67 Rev 3. and the installer did not work, and give me the Windows "this program did not install correctly."

I'm hoping it's just a bad upload and not malware or something. Can anyone verify this? I just used the outdated drivers on ASUS's website. Should I just do another clean install of Windows?

OS is Windows 7 Professional x64 on a Crucial M4 128GB SSD.
post #2679 of 3000
My god, how unlucky i am.

My asus p8p67 evo decides to act up. Stuck at VGA LED on a perfectly fine 6850 (tested on 2 diff comps). Because I don't like to wait RMA and want to use my computer, i go buy Asus p8p67 LE and now it's stuck in an infinite boot loop. I know it can be my 1866 gskill rams causing it but I'll just replace it with another p67 board i guess or maybe get a 4gb single 1333 certified ram.

This Sandybridge upgrade since January giving me enough headaches, I feel like gonna buy an athlon x2 machine and just be happy.
Intel Evilnow
(18 items)
 
   
CPUMotherboardGraphicsRAM
i5 2500k 4ghz @ Offset -0.015 Asus P8P67 Evo (bios 3207) Sapphire 280x Tri-x 3GB OC (Stock 1020/1500 Non... G.Skill RipjawsX 2x4gb 1866mhz 9-10-9-28-2n @ 1.5v 
Hard DriveHard DriveHard DriveHard Drive
SHSS37A120G WD5000AAKX-001CA0 WD20EARX WD20EZRZ 
Hard DriveOptical DriveCoolingOS
WD5001AALS-00L3B2 (Now External) ASUS DRW-1814BLT Noctua NH-u12p SE2 Windows 10 Pro 
MonitorKeyboardPowerCase
Asus VH242H Wobbly Stand :) Microsoft Ergo 4000 Enermax Infiniti 650 (28a,28a,30a) Cooler Master haf 912 Advanced 
MouseOther
A4tech x7 F3 Sunbeam RHK-EX-BA Rheobus-Extreme Fan Controlle... 
CPUMotherboardGraphicsRAM
Phenom II x6 1090t BE 3.6/4.0 Turbo@def.volt MSI K9A2 Platinum v1 Sapphire HD6850 1GB 850/1100@def.volt Kingston 2x2gb Hyperx 1066 5-5-5-15 
Hard DriveHard DriveOptical DriveOS
Western Digital WD5001AALS Seagate Barracuda ST3250410AS Asus DRW-1814BLT Windows 7 Ultimate x64 SP1 
MonitorKeyboardPowerCase
Asus VH242H 23.6" Wobbly Stand :D Microsoft Ergo 4000 Enermax Infiniti 650w (28a,28a,30a) Thermaltake Kandalf SuperTower 
Mouse
A4 tech Swop-3 
  hide details  
Reply
Intel Evilnow
(18 items)
 
   
CPUMotherboardGraphicsRAM
i5 2500k 4ghz @ Offset -0.015 Asus P8P67 Evo (bios 3207) Sapphire 280x Tri-x 3GB OC (Stock 1020/1500 Non... G.Skill RipjawsX 2x4gb 1866mhz 9-10-9-28-2n @ 1.5v 
Hard DriveHard DriveHard DriveHard Drive
SHSS37A120G WD5000AAKX-001CA0 WD20EARX WD20EZRZ 
Hard DriveOptical DriveCoolingOS
WD5001AALS-00L3B2 (Now External) ASUS DRW-1814BLT Noctua NH-u12p SE2 Windows 10 Pro 
MonitorKeyboardPowerCase
Asus VH242H Wobbly Stand :) Microsoft Ergo 4000 Enermax Infiniti 650 (28a,28a,30a) Cooler Master haf 912 Advanced 
MouseOther
A4tech x7 F3 Sunbeam RHK-EX-BA Rheobus-Extreme Fan Controlle... 
CPUMotherboardGraphicsRAM
Phenom II x6 1090t BE 3.6/4.0 Turbo@def.volt MSI K9A2 Platinum v1 Sapphire HD6850 1GB 850/1100@def.volt Kingston 2x2gb Hyperx 1066 5-5-5-15 
Hard DriveHard DriveOptical DriveOS
Western Digital WD5001AALS Seagate Barracuda ST3250410AS Asus DRW-1814BLT Windows 7 Ultimate x64 SP1 
MonitorKeyboardPowerCase
Asus VH242H 23.6" Wobbly Stand :D Microsoft Ergo 4000 Enermax Infiniti 650w (28a,28a,30a) Thermaltake Kandalf SuperTower 
Mouse
A4 tech Swop-3 
  hide details  
Reply
post #2680 of 3000
Quote:
Originally Posted by Mize View Post

I sure hope this is it for me. I recently went to 2103 as I had issues with a Crucial SSD and I can Prime+superpi for hours while encoding with handbrake...but come home from work and it's crashed. Had to bump Vcore to 1.36 and crank LLC to extreme to get some margin of stability with 2103 at 4.5 GHz as well.

Not a single idle bsod for 4 days since disabling c3/c6. Thank you.

(the thank you goes to Bal3Wolf, BTW.}
Edited by Mize - 2/26/12 at 5:39am
donut
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i3/i5/i7 Asus Sabertooth P67 GTX 680 GTX 680 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaws 4x4  Crucial m4 Intel 320 WD Caviar Black 
Hard DriveHard DriveOptical DriveOptical Drive
Seagate Barracuda samsung 840 evo 750  LG BR-RW LiteOn DVD-R 
CoolingOSMonitorMonitor
H2O W7P 64 bit Dell 2412 Dell 2412 
MonitorPowerCase
Dell 2412 Corsair ax1200i COSMOS 
  hide details  
Reply
donut
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i3/i5/i7 Asus Sabertooth P67 GTX 680 GTX 680 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaws 4x4  Crucial m4 Intel 320 WD Caviar Black 
Hard DriveHard DriveOptical DriveOptical Drive
Seagate Barracuda samsung 840 evo 750  LG BR-RW LiteOn DVD-R 
CoolingOSMonitorMonitor
H2O W7P 64 bit Dell 2412 Dell 2412 
MonitorPowerCase
Dell 2412 Corsair ax1200i COSMOS 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22**