Overclock.net › Forums › Intel › Intel Motherboards › Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22**
New Posts  All Forums:Forum Nav:

Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22** - Page 87

post #861 of 3000
Quote:
Originally Posted by ChickenInferno View Post
Hey guys,
I have been playing around in the bios of the P8P67 Pro and was having a few issues getting started. I think I've got most of it sorted out, but alot of this seems counter-intuitive from previous generations. I couldn't find a bios template so I made one. Let me know if there is anything you guys think is a stray setting in my template, but I mostly wanted to make it so there was one.

[P8P67 Pro Bios Template]
CPU: i7 2600K
Ram: G-Skill Ripjaws 1600mhz cas9 (2x4gb) 1.50v
Bios: 1253

Ai Overclocker Tuner: Manual
BCLK/PEG Frequency: 103.0
Turbo Ratio: By All Cores
By All Cores (Can Adjust in OS): 40
Internal PLL Overvoltage: Enabled
Memory Frequency: DDR3-1648MHz
EPU Power Saving Mode: Disabled

CPU Power Management
CPU Ratio: 40
Enhanced Intel Speedstep Technology: Enabled
Turbo Mode: Enabled

Turbo Mode Parameters
Long Duration Power Limit: Auto
Long Duration Maintained: Auto
Short Duration Maintained: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto

Load Line Calibration: High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: T. Probe
CPU Current Capability: 140%

CPU Voltage: Manual Mode
CPU Manual Voltage: 1.2400
DRAM Voltage: 1.50000
VCCSA: 0.92500
VCCIO: 1.068750
PCH: 1.05000
CPU Spread Spectrum: Disabled

CPU Configuration
CPU Ratio: 40
Intel Adaptive Thermal Monitor: Enabled
Hyper-Threading: Enabled
Active Processor Cores: All
Limit CPUID Max: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Enabled
Enhanced Intel Speedstep: Enabled
Turbo Mode: Enabled
CPU C1E: Auto
CPU C3 Report: Auto
CPU C6 Report: Enabled
What issues are you having?
#well
(18 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H Sapphire RX 580 Corsair CMX8GX3M2A2000C9 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Generic DVD±RW Burner Noctua NH-D14 Windows 10 
MonitorMonitorKeyboardPower
Dell U2711 Samsung SyncMaster 2233 Ducky DK9008 Overclock.net Edition, Cherry MX B... Corsair TX850 
CaseMouseMouse PadAudio
Fractal Design Core 2500 Logitech G303 QPAD HeatoN L M-Audio Fast Track USB 
AudioAudio
Beyerdynamic DT-770 80 Ohm AntLion ModMic v3 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
#well
(18 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H Sapphire RX 580 Corsair CMX8GX3M2A2000C9 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Generic DVD±RW Burner Noctua NH-D14 Windows 10 
MonitorMonitorKeyboardPower
Dell U2711 Samsung SyncMaster 2233 Ducky DK9008 Overclock.net Edition, Cherry MX B... Corsair TX850 
CaseMouseMouse PadAudio
Fractal Design Core 2500 Logitech G303 QPAD HeatoN L M-Audio Fast Track USB 
AudioAudio
Beyerdynamic DT-770 80 Ohm AntLion ModMic v3 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
post #862 of 3000
Have we not been warned repeatedly to not increase the BLCK on these chips above 100?

Not like its needed. I'm running at 4.7 ghz with the BLCK at 100 and multi at 47.
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans  Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans  Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
post #863 of 3000
If you let the auto tuning over clock for you it bumps the BCLK to 103 right away and mutliplier to 43. It gives you a decent 4.4 overclock, but if you try and push it past that with the BCLK at 103 you run into stability issues. This has been my experience so far...
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
post #864 of 3000
Well, the route I'm taking it running stock till I know more, all I know at this point... is that it was a HUUUUGE upgrade from my q9450 even at 3.6ghz, even at stock. And I havent had a single problem with anything with my board.
post #865 of 3000
SimpleTech thank you for maintaining this thread and thanks to all the people who contributed valuable sandy bridge information.

This thread is where i come to for sandy bridge asus p67 updates and information.
post #866 of 3000
Quote:
Originally Posted by gonX View Post
What issues are you having?
It has mostly been stability issues trying to push towards 5.0ghz+. It wouldn't even boot with a 50x multiplier until I turned things like C1E back on. The settings I posted are after I've played around with everything and changed most of them several times. The counter-intuitive part is leaving things like Speedstep on and watching the CPU downclock at idle. Did you see anything you would say is a stray setting?

As of now the highest I have fully stabilized is 4.532ghz=103x44 w/ 1.320v and have 4.841ghz=103x47 in the ballpark of stability at 1.425v

Quote:
Originally Posted by Robilar View Post
Have we not been warned repeatedly to not increase the BLCK on these chips above 100?

Not like its needed. I'm running at 4.7 ghz with the BLCK at 100 and multi at 47.
Everytime I set this thing back to default. My board keeps setting the baseclock to 103. I didn't even notice until I was stability testing at 4.5ghz=103x44. It hadn't seemed to cause me any issues whatsoever and was fully stable without adjusting any voltages at stock and again at 103x40=4.120ghz (again stock voltages).
Gaming PC / HTPC
(17 items)
 
Bedroom PC
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 7700k Asus Prime Z270-A GB Auros-X 1080 Ti G-Skill (2x8gb) 3000mhz  
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Western Digital 5900rpm Seagate 7200rpm LG 22x DVD Burner 
CoolingOSMonitorKeyboard
Noctua NH-D14 Win 10 x64 Pro LG 55" 4k B6 OLED Microsoft Desktop 400 
PowerCaseMouseMouse Pad
Corsair TX750 V2 NZXT Source 210 Microsoft Desktop 400 Black 
Audio
Custom Surround 5.1 
CPUMotherboardGraphicsRAM
Intel 2120T Biostar H61MH Intel HD 2000 G-Skill F3-12800CL9D-8GBXL  
Hard DriveOptical DriveCoolingOS
Samsung Evo 128gb Asus 24x DVD Burner Stock Win 10 x64 
MonitorKeyboardPowerCase
LG 40" 1080p HP Wireless Keyboard/Mouse Silverstone 400W ST40F-ES Silverstone ML03B 
Other
Linksys WMP600N Wireless Card 
  hide details  
Reply
Gaming PC / HTPC
(17 items)
 
Bedroom PC
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 7700k Asus Prime Z270-A GB Auros-X 1080 Ti G-Skill (2x8gb) 3000mhz  
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Western Digital 5900rpm Seagate 7200rpm LG 22x DVD Burner 
CoolingOSMonitorKeyboard
Noctua NH-D14 Win 10 x64 Pro LG 55" 4k B6 OLED Microsoft Desktop 400 
PowerCaseMouseMouse Pad
Corsair TX750 V2 NZXT Source 210 Microsoft Desktop 400 Black 
Audio
Custom Surround 5.1 
CPUMotherboardGraphicsRAM
Intel 2120T Biostar H61MH Intel HD 2000 G-Skill F3-12800CL9D-8GBXL  
Hard DriveOptical DriveCoolingOS
Samsung Evo 128gb Asus 24x DVD Burner Stock Win 10 x64 
MonitorKeyboardPowerCase
LG 40" 1080p HP Wireless Keyboard/Mouse Silverstone 400W ST40F-ES Silverstone ML03B 
Other
Linksys WMP600N Wireless Card 
  hide details  
Reply
post #867 of 3000
I'm at 5 GHz stable, 1.435 v in BIOS, seems to be stable in Prime so far but I need to test more. I was 100% stable at 4.8 GHz/1.415v , which will probably be my 24/7 setting. Max temp at 5 GHz was 68 deg on the highest core.

EDIT- BTW, the video card in the validation link is just a test card I use.
Edited by Sheyster - 1/29/11 at 12:05pm
EconoGamer#
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 5 GHz (delidded) ASRock Z97 Extreme4 nVidia Titan Xp Team Xtreem 16GB/2400 
Hard DriveHard DriveCoolingOS
Corsair Force GT 120G SSD (OS) Crucial MX200 500G SSD (Games) Corsair H75 Hydro Cooler Windows 10 x64 
MonitorKeyboardPowerCase
Acer Predator Z35 Corsair K95 RGB Platinum Corsair HX750 v2 80+ Gold Thermaltake Core X9 (M0dd3D!) 
MouseMouse PadAudioAudio
Logitech G403 wireless XTrac Ripper XL (cloth) Realtek ALC1150 (on-board) Audio Technica ATH-MSR7 Headphones 
  hide details  
Reply
EconoGamer#
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 5 GHz (delidded) ASRock Z97 Extreme4 nVidia Titan Xp Team Xtreem 16GB/2400 
Hard DriveHard DriveCoolingOS
Corsair Force GT 120G SSD (OS) Crucial MX200 500G SSD (Games) Corsair H75 Hydro Cooler Windows 10 x64 
MonitorKeyboardPowerCase
Acer Predator Z35 Corsair K95 RGB Platinum Corsair HX750 v2 80+ Gold Thermaltake Core X9 (M0dd3D!) 
MouseMouse PadAudioAudio
Logitech G403 wireless XTrac Ripper XL (cloth) Realtek ALC1150 (on-board) Audio Technica ATH-MSR7 Headphones 
  hide details  
Reply
post #868 of 3000
Nice on 5GHZ. I'm going to push my cpu more later hoping to get close to that.
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
Like a Bausss...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.7ghz 1.416v ASUS P8P67 PRO XFX Radeon HD 6950 (unlocked to 6970) G.SKILL Ripjaws 4 x 2GB 1600MHz 7-8-7-24 
Hard DriveOSPowerCase
OCZ Vertex 2 120GB Win 7 Home Prem. x64 XFX 850W Black Edition CM 690 II Adv. 
Mouse
Razer Abyssus 
  hide details  
Reply
post #869 of 3000
Thread Starter 
Added a BIOS template. Let me know what you guys/gals think.

Here are a few screenshots of my BIOS with my current overclock. I haven't had any dual boot or other weird issues so far with those settings.















post #870 of 3000
Is that on the 1053 bios? Looks good imo. I am getting my butt kicked trying to get mine to 4.8GHz stable with offset voltage enabled, had to leave LLC, Phase and duty controls at lowest levels to keep my voltages below 1.5xx. Right now am running prime with voltage fluctuating between 1.448 to 1.478 half an hour stable hottest core @ 70°c.

Edit: Manually adjusting the offset causes instability at all setting so I left it to auto.
Edited by ShaCanX - 1/29/11 at 1:10pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P67 Series Information Thread (drivers, BIOSes, overclocking, reviews) **UPDATED 4/22**