Overclock.net › Forums › Intel › Intel - General › The ULTIMATE Sandy Bridge OC Guide + P67A-UD7 Performance Review
New Posts  All Forums:Forum Nav:

The ULTIMATE Sandy Bridge OC Guide + P67A-UD7 Performance Review - Page 71

post #701 of 713
Firstly, great guide, really good!!

So, i've hit a little snag. And would like some advise before I continue trying to OC my rig.

I'm running the following.

Gigabyte P67A-UD7-B3
i7 2600k (D2) w/ Noctua NH-D14
16GB G.Skill Ripjaws X
Corsair TX850 PSU
Nvidia 680GTX
Intel 520 240GB ssd, and a bunch of random xTB drives.

I've followed the guide, and set the multiplier to 45 and with vcore on auto and it settles on around 1.372 ( i think ) in the bios and I've disabled all the power saving crap etc as the guide suggests.
And it boots into windows just fine at 4.5ghz

But as soon as I run IntelBurnTest the pc will hard lock (still with the desktop displayed) or BSOD with 0x124
I've tried lowering vcore to 1.34 and increasing to 1.38 and it still locks up.

Is it simply a matter of adding more vcore? going above 1.38 seems a little high for just 4.5ghz, then again I guess each cpu is a little different.
HWMonitor I dont think ever showed the vcore over 1.34 .....
Temps are fine, didn't get higher than mid 50's before it freezes (it will run 5-10s then lock)
I'm thinking I might need to go down the turbo mode with set TDP and TDC ??

Another oddity, if i enable load line calibration (either 1 or 2) I wont even boot past bios properly. Just reboots over and over, turn it off and it boots fine.

Thanks for any and all help in advance thumb.gif
Edited by DaForce2000 - 10/11/12 at 6:23am
DaPuter
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K P67A-UD7-B3 Gigabyte GeForce GTX 680 OC edition G.Skill Ripjaws X 
Hard DriveHard DriveCoolingOS
Intel 520 SSD 240GB Various Western Digital and Seagate drives Noctua NH-D14 Windows 7 Ultimate 64bit 
MonitorPowerCaseMouse
Dell 3007WFP Corsair 850TX Antec Twelve Hundred Razer Mamba 2012 
Mouse PadAudio
Razer Destructor Logitech Z-680 
  hide details  
Reply
DaPuter
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K P67A-UD7-B3 Gigabyte GeForce GTX 680 OC edition G.Skill Ripjaws X 
Hard DriveHard DriveCoolingOS
Intel 520 SSD 240GB Various Western Digital and Seagate drives Noctua NH-D14 Windows 7 Ultimate 64bit 
MonitorPowerCaseMouse
Dell 3007WFP Corsair 850TX Antec Twelve Hundred Razer Mamba 2012 
Mouse PadAudio
Razer Destructor Logitech Z-680 
  hide details  
Reply
post #702 of 713
Quote:
Originally Posted by Sin0822 View Post

If you enable Turbo Mode (which you do not have to and I recommend not doing) you will need to set each multiplier. Note that on many motherboards you do not have the option to OC without turbo, its ok, 52x multi is 52x multi whether its turbo or not. On GIGABYTE boards, enabling turbo shouldn’t make your multiplier go crazy, I have tested on the latest and even old BIOSes and you can use Turbo and the multiplier not drop. Turbo Mode or no Turbo Mode, your multiplier will stick steady. If for some reason it is jumping around, you have the option to disable Turbo Mode.

soooooooooooo... theres no point in turbo mode when its OC'd? i cant get it to downclock to say 1.6GHz when i don't need it and go to my 4.4Ghz oc when i need it?

also thanks for the guide, was very very good biggrin.gifthumb.gif im getting 4.4Ghz @ 1.35v with sub-65C temps on load biggrin.gif
    
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Gigabyte GA-Z68XP-UD4 Gigabyte GTX 970 G1 Gaming G-Skill Ripjaws 1600MHz 8gb (2x4gb)  
Hard DriveHard DriveHard DriveHard Drive
Sandisk Extreme 240GB WD Green 500GB WD Blue 500GB Seagate 500GB 
Optical DriveCoolingOSMonitor
Samsung DVD Noctua NH-D14 Windows 7 Home Premium x64 Crossover 27Q LED-P 
MonitorKeyboardPowerCase
ASUS VS248 Ducky Shine Zero D2108S (Blue-LED) (Cherry MX B... Corsair TX-750 Silverstone Raven RV01 
MouseMouse PadAudio
Logitech G9x Roccat Taito Audio Technica ATH-M50 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Gigabyte GA-Z68XP-UD4 Gigabyte GTX 970 G1 Gaming G-Skill Ripjaws 1600MHz 8gb (2x4gb)  
Hard DriveHard DriveHard DriveHard Drive
Sandisk Extreme 240GB WD Green 500GB WD Blue 500GB Seagate 500GB 
Optical DriveCoolingOSMonitor
Samsung DVD Noctua NH-D14 Windows 7 Home Premium x64 Crossover 27Q LED-P 
MonitorKeyboardPowerCase
ASUS VS248 Ducky Shine Zero D2108S (Blue-LED) (Cherry MX B... Corsair TX-750 Silverstone Raven RV01 
MouseMouse PadAudio
Logitech G9x Roccat Taito Audio Technica ATH-M50 
  hide details  
Reply
post #703 of 713
I can't seem to get past this 7e error code, does anyone have an idea?

060513-8500-01.dmp 05/06/2013 11:54:32 SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e ffffffff`c0000005 fffff800`289d492e fffff880`0456e438 fffff880`0456dc70 ntoskrnl.exe ntoskrnl.exe+3d092e x64 ntoskrnl.exe+3d092e C:\Windows\Minidump\060513-8500-01.dmp 8 15 9200 289,904
Thingy
(14 items)
 
  
Reply
Thingy
(14 items)
 
  
Reply
post #704 of 713
Quote:
Originally Posted by bloodfx View Post

I can't seem to get past this 7e error code, does anyone have an idea?

060513-8500-01.dmp 05/06/2013 11:54:32 SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e ffffffff`c0000005 fffff800`289d492e fffff880`0456e438 fffff880`0456dc70 ntoskrnl.exe ntoskrnl.exe+3d092e x64 ntoskrnl.exe+3d092e C:\Windows\Minidump\060513-8500-01.dmp 8 15 9200 289,904

Based on this post, BSOD 7e is related to the OS (being corrupted, possibly due to overclocking).
Quote:
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage. Can also mean more juice for the south bridge ICH volts
0x1E = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3B = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x00000109 = Not enough or too Much memory voltage
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
0x24 = Disk corruption (Did you OC the PCI-E bus?)
0x19: memory voltage
Switch 810 Rig
(20 items)
 
TJ07 Rig
(15 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7 2700K Gigabyte GA-P67A-UD7-B3 Radeon HD 6970 Radeon HD 6970 
RAMRAMHard DriveCooling
Corsair CMP4GX3M2A 1600C9 Corsair CMP4GX3M2A 1600C9 WDC WD10EALX-009BA0 EK Supreme HF 
CoolingCoolingCoolingCooling
EK-RAM Dominator EK-FB Kit GA P67A EK-FC6970 MCP655-B 
OSOSMonitorKeyboard
MS Windows 8 64-bit Ubuntu 12.04 AOC T2242we Logitech K320 
PowerCaseMouseAudio
Corsair AX750 NZXT Switch 810 Gunmetal Edition Logitech M325 Altec Lansing 
CPUMotherboardGraphicsRAM
Intel Core i7-2700K Gigabye GA-P67A-UD7 B3 AMD HD6970 Corsair Dominator 2x2GB CL9 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Blue Windows 8.1 and Ubuntu 12.04 AOC 21.5 inches Logitech K320 
PowerCaseMouseOther
Corsair AX750 Silverstone Temjin 07 Logitech M325 Wireless Mouse EK Supreme HF 
OtherOtherOther
EK FC-6970 EK-FB KIT GA P67A (UD7) EK RAM Dominator 
  hide details  
Reply
Switch 810 Rig
(20 items)
 
TJ07 Rig
(15 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7 2700K Gigabyte GA-P67A-UD7-B3 Radeon HD 6970 Radeon HD 6970 
RAMRAMHard DriveCooling
Corsair CMP4GX3M2A 1600C9 Corsair CMP4GX3M2A 1600C9 WDC WD10EALX-009BA0 EK Supreme HF 
CoolingCoolingCoolingCooling
EK-RAM Dominator EK-FB Kit GA P67A EK-FC6970 MCP655-B 
OSOSMonitorKeyboard
MS Windows 8 64-bit Ubuntu 12.04 AOC T2242we Logitech K320 
PowerCaseMouseAudio
Corsair AX750 NZXT Switch 810 Gunmetal Edition Logitech M325 Altec Lansing 
CPUMotherboardGraphicsRAM
Intel Core i7-2700K Gigabye GA-P67A-UD7 B3 AMD HD6970 Corsair Dominator 2x2GB CL9 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Blue Windows 8.1 and Ubuntu 12.04 AOC 21.5 inches Logitech K320 
PowerCaseMouseOther
Corsair AX750 Silverstone Temjin 07 Logitech M325 Wireless Mouse EK Supreme HF 
OtherOtherOther
EK FC-6970 EK-FB KIT GA P67A (UD7) EK RAM Dominator 
  hide details  
Reply
post #705 of 713
Did that does nothing for me, Still get 7e error.
Thingy
(14 items)
 
  
Reply
Thingy
(14 items)
 
  
Reply
post #706 of 713

can anyone tell me what Performance Enhance does?

spent half an hour searching it up on the net but couldn't find anything definite

Dream PC
(17 items)
 
Surface Pro 3
(9 items)
 
 
CPUMotherboardGraphicsRAM
INTEL Core i7 6700K ASUS Maximus VIII Hero Z170 MSI Geforce GTX 980 Ti Gaming 6G G.SKILL Ripjaws 4 series 16GB DDR4 3000 
Hard DriveHard DriveCoolingOS
SAMSUNG SM951 NVMe 512GB SAMSUNG 850 EVO 1TB COOLER MASTER Nepton 280L MICROSOFT Windows 10 Pro x64 
MonitorMonitorKeyboardPower
BENQ XL2420TE DELL UltraSharp U2415 WASD V2 custom CORSAIR HX850i 
CaseMouseAudioOther
NZXT H440 white CORSAIR Vengeance M95 CREATIVE Sound Blaster Z CPU Delid 
Other
LED Lighting 
CPUMotherboardGraphicsRAM
Intel Core i5 4300U Microsoft Surface Intel HD Graphics 4400 8 GB DDR3L 
Hard DriveOSKeyboardMouse
256 GB SSD Windows 10 Pro x64 Surface Pro 4 Type Cover with Fingerprint ID Microsoft Arc Mouse Surface Edition 
  hide details  
Reply
Dream PC
(17 items)
 
Surface Pro 3
(9 items)
 
 
CPUMotherboardGraphicsRAM
INTEL Core i7 6700K ASUS Maximus VIII Hero Z170 MSI Geforce GTX 980 Ti Gaming 6G G.SKILL Ripjaws 4 series 16GB DDR4 3000 
Hard DriveHard DriveCoolingOS
SAMSUNG SM951 NVMe 512GB SAMSUNG 850 EVO 1TB COOLER MASTER Nepton 280L MICROSOFT Windows 10 Pro x64 
MonitorMonitorKeyboardPower
BENQ XL2420TE DELL UltraSharp U2415 WASD V2 custom CORSAIR HX850i 
CaseMouseAudioOther
NZXT H440 white CORSAIR Vengeance M95 CREATIVE Sound Blaster Z CPU Delid 
Other
LED Lighting 
CPUMotherboardGraphicsRAM
Intel Core i5 4300U Microsoft Surface Intel HD Graphics 4400 8 GB DDR3L 
Hard DriveOSKeyboardMouse
256 GB SSD Windows 10 Pro x64 Surface Pro 4 Type Cover with Fingerprint ID Microsoft Arc Mouse Surface Edition 
  hide details  
Reply
post #707 of 713
I have a few question / problems with this board and a 2500k
I know this thread is dead so will first ask if there is someone who reads this thread and can help before i start writing my block of text.
Thanks smile.gif
post #708 of 713
Just want to say thanks for this fantastic guide, I took my (3 years old on 1/11/14!) i2600 to 4.5Gz yesterday on the stock cooler as a test. Booted right into Windows 8.1, ran a few programs quick and saw the temp (CPUID HW Monitor) approaching 80C so I shut her down and went back to 3.6 until my Noctua D14 arrives. Can't wait to run some benchmarks once I know she's stable! If she cooks i'll get another one and add Intel's "Tuning Coverage" to it..

thumb.gifthumb.gif
post #709 of 713
Thanks, with your guide i took my 2600K from stock to 4.5 GHz prime95 10+ hours stable, vcore on bios is 1.445 v, on cpu-z 1.392 v on load.
Zomboy
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asus Maximus V Gene XFX HD6970 Black Edition CORSAIR XMS3 8GB (4 x 2GB) TR3X6G1600C8 
Hard DriveHard DriveHard DriveCooling
Western Digital Velociraptor 300GB Western Digital Caviar Blue 320 GB Western Digital Caviar Green 2TB Cooler Master Hyper 212+ 
OSMonitorPowerCase
Microsoft Windows 8.1 x64 LG Flatron E2360V Cooler Master Silent Pro Bronze 1000W RSA00-AMB... Cooler Master Cosmos S 
MouseOther
Logitech G9x Logitech Wireless F710 
  hide details  
Reply
Zomboy
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asus Maximus V Gene XFX HD6970 Black Edition CORSAIR XMS3 8GB (4 x 2GB) TR3X6G1600C8 
Hard DriveHard DriveHard DriveCooling
Western Digital Velociraptor 300GB Western Digital Caviar Blue 320 GB Western Digital Caviar Green 2TB Cooler Master Hyper 212+ 
OSMonitorPowerCase
Microsoft Windows 8.1 x64 LG Flatron E2360V Cooler Master Silent Pro Bronze 1000W RSA00-AMB... Cooler Master Cosmos S 
MouseOther
Logitech G9x Logitech Wireless F710 
  hide details  
Reply
post #710 of 713
Amazing isn't it? My system has been running 24/7 for well over a month with only one very minor issue. Every once in a while (3-4 times in 6 weeks of everyday use) the system locks during a CPU/Video intensive game, video goes solid light blue with some broken up stripes, and I get a loud HUM through the speakers. As the ATI cards have built in sound I tried disabling that but it still happens. Minor annoyance but I would like to try and eliminate it as everything else works great 99% of the time!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › The ULTIMATE Sandy Bridge OC Guide + P67A-UD7 Performance Review