
2600K
2500K
PPD numbers on the spreadsheet are for the CPU client only. If you are running GPU clients as well, don't include their PPD.
Submission data should include your minimum TPF during the run, and the PPD calculated from that TPF either by HFM or one of the online PPD calculators.
For the time being, I will allow one entry per clockspeed, per project number. This may make for a very long list, so I might limit entries eventually.
If you improve your PPD on an existing entry, submit it the same way, and PM me letting me know you have an updated entry to make sure I catch it. I will remove your previous data.
Let me know if you all agree this is a reasonable way to handle the list?
To submit your results:
Step 1 - Post in this thread including a screen shot with the FAH client and CPU-Z open after a minimum of 4 frames.
Step 2 - Click appropriate link below depending your specific CPU, be ready to answer all the fields you see above in the charts.
Submission links:
2600K Results
2500K Results
If your chip is not listed, PM me and I will add it to the list.
Example post:
Full screen or partial capture; note the highlighted boxes, after a minimum run of 4 frames, client showing Project number, CPU-Z showing full load Mhz.

Thank you for taking the time to add to our database!
Pretty straight forward. Please, your comments and suggestions are welcome.
Edited by Digigami - 1/25/11 at 7:31pm











I'm thinking it may be time to let my 920 go.

