So here's an update, I've lowered the ICH / IOH voltage just a little notch set the cpu/pci amplitude to 700mV. I also swapped the fans so it pulls from the front and pushes out at the top / back.
The cooler has two fans on it the stock 120 and 80 and then there's an extra fracrtial fan in the rear and one on 120mm noctua on the side. Seems the temps are getting better here. I also applied a little extra thermal grease since I had to rotate the cooler.
Next thing I guess is to try and either lower the vcore or try to raise the BCKL a little bit.
Are the settings for ICH/IHO/DRAM good even if I want to go up a couple of hundred MHz?
*Note* The reason the CPU fan is 0 RPM is because all the fans in the computer uses external fan controls. The CPU fans uses the fan-control that came with the fractial design case.