Overclock.net › Forums › Intel › Intel CPUs › Post your Sandy bridge OCs
New Posts  All Forums:Forum Nav:

Post your Sandy bridge OCs - Page 6

post #51 of 175
Quote:
Originally Posted by Jonesey I7 View Post
Meeeeeeeeeeeeee Toooooooooooooooooooooooo
Hell yeah, same here!

...excited to make the switch from Barton (Athlon XP circa 2003) to Sandy Bridge...
post #52 of 175
Quote:
Originally Posted by Silver_WRX02 View Post
U have two 2600k right? What are the VIDs? What voltage is a good VID for SB?
Hmm i forget but they are low on is 1.18 and the other 1.23? idk i can look it up for you later, but i have used upto 1.6v many times, 1.5v was really good, and 1.375 is what it cool for .48ghz and 4.5ghz was 1.35. I didn't try that with the other chip just the worse chip, my 5.2ghz chip should do much better.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #53 of 175
Quote:
Originally Posted by Robilar View Post
Here are my first test runs:

2600k at 4.3 ghz, 1.264 vcore.

H70 with stock fans running at about 60% (any higher and they sound very annoying).


we have the same batch number
Beast
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K @ 4.5 ghz 1.312volts ASUS P8P67 Deluxe B3 Evga GTX 470 SLI 310.70 drivers 16 GB Corsair Vengance (9-9-9-24 1t @ 1.5 Volts... 
OSMonitorKeyboardPower
Windows 7 64bit Sp1 samsung syncmaster b2330 1920 by 1080 g510 thermaltake tr2 rx 850 watt 
Mouse
g500 
  hide details  
Reply
Beast
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K @ 4.5 ghz 1.312volts ASUS P8P67 Deluxe B3 Evga GTX 470 SLI 310.70 drivers 16 GB Corsair Vengance (9-9-9-24 1t @ 1.5 Volts... 
OSMonitorKeyboardPower
Windows 7 64bit Sp1 samsung syncmaster b2330 1920 by 1080 g510 thermaltake tr2 rx 850 watt 
Mouse
g500 
  hide details  
Reply
post #54 of 175
So will it be safe for me to use my dominator gt's C7 with this cpu?
The voltage is 1.65 on these, should i worry?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 @ 4.6 EVGA 790I 3 8800 Ultra's Tri-SLI 4 Gigs Mushkin DDR3 991601 @ 1840 
Hard DriveOptical DriveOSMonitor
2X Raid Maxtor 320Gig 16meg cache External toshiba dvd Vista 64 LG 24" 
KeyboardPowerCaseMouse
saitek PCPC 750 and Enermax 620 Stacker logitech mx-518 
Mouse Pad
ratpadz 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 @ 4.6 EVGA 790I 3 8800 Ultra's Tri-SLI 4 Gigs Mushkin DDR3 991601 @ 1840 
Hard DriveOptical DriveOSMonitor
2X Raid Maxtor 320Gig 16meg cache External toshiba dvd Vista 64 LG 24" 
KeyboardPowerCaseMouse
saitek PCPC 750 and Enermax 620 Stacker logitech mx-518 
Mouse Pad
ratpadz 
  hide details  
Reply
post #55 of 175
Quick preliminary report for ya'll. Spent my post-work day exhausting dual 16 ounce compressed air cans, a pair of brand new paintbrushes (gotta clear out the nooks & crannies, yes?), innovera electronic safe cleaning wipes & a delicious pack of Marlboro Reds. Shorts. Replaced the case carcass of my i7-875K / Gigabyte P55A-UD7 with my sparkly new i7-2600K / Gigabyte P67-UD7. One .. giant .. side-step, from mainstream to newer mainstream.

Anyway, with half an hour of tinkering (& with a fundamental starting point provided generously by this thread! Thanks kindly.) i've managed to enter & re-install Windows with a 4.8 GHz clock & 1.34 volts. No testing done yet, but it's at least stable involving inane tasks. Update later, for sure. :]
Quadfire Turbo
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 - 2600K / 5.4 GHz Gigabyte P67A-UD7-B3 #2 Sapphie Radeon 6990 @ 1030 / 1520 Ripjaws 4GB x 4 (16GB) @ 2200 MHz 
Hard DriveOptical DriveOSMonitor
OCZ Vertex3,Corsair Force GT,Intel X25-M, +4TB HDD LG Bluray Burner Windows 7 64 5x1 P(NEC ips), S750 Samsung 120hz HD3D, HP zr30w 
KeyboardPowerCaseMouse
Logitech G13 #2 Kingwin Mach 1 / 1220 Watts XSPC H2 R.A.T. 7 
Mouse Pad
Razer Goliath 
  hide details  
Reply
Quadfire Turbo
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 - 2600K / 5.4 GHz Gigabyte P67A-UD7-B3 #2 Sapphie Radeon 6990 @ 1030 / 1520 Ripjaws 4GB x 4 (16GB) @ 2200 MHz 
Hard DriveOptical DriveOSMonitor
OCZ Vertex3,Corsair Force GT,Intel X25-M, +4TB HDD LG Bluray Burner Windows 7 64 5x1 P(NEC ips), S750 Samsung 120hz HD3D, HP zr30w 
KeyboardPowerCaseMouse
Logitech G13 #2 Kingwin Mach 1 / 1220 Watts XSPC H2 R.A.T. 7 
Mouse Pad
Razer Goliath 
  hide details  
Reply
post #56 of 175
got a 2600k chip last night and was running it on a stock cooler. Picked up a cheapo cooler till i get the noctua d14 to do some overclocking. Intel cooler was junk and i could only run at 4.1 or 4.2ghz stock and would get like 75 degree temps. The new cooler gave me like 15-20 degree drop. I can clock to 4.8 on 1.366v and stable no issues and temps are 72 degree under load. Right now i am experimenting and running at 45x and 100 blck and 1.272v stable no issues. I am not going to go over 1.4v for now and do not want to attempt 5.0ghz till i get a high end air cooler. Not going to be messing around with watercooling since air cooling works just fine. I am happy at 4.5 and nice to see it can hit 4.8ghz and stay under 1.4. Using ddr3 ram 1600mhz @ 1.65v but running it at 1.60v. Any questions let me know and i can answer them. I have not ran a vantage with the new cooler which is a Thermaltake Contac 29 (Yes i know junk but better than stock) but here is some benches from last night.

4.1ghz







4.8ghz


post #57 of 175
Quote:
Originally Posted by XXXfire View Post
Quick preliminary report for ya'll. Spent my post-work day exhausting dual 16 ounce compressed air cans, a pair of brand new paintbrushes (gotta clear out the nooks & crannies, yes?), innovera electronic safe cleaning wipes & a delicious pack of Marlboro Reds. Shorts. Replaced the case carcass of my i7-875K / Gigabyte P55A-UD7 with my sparkly new i7-2600K / Gigabyte P67-UD7. One .. giant .. side-step, from mainstream to newer mainstream.

Anyway, with half an hour of tinkering (& with a fundamental starting point provided generously by this thread! Thanks kindly.) i've managed to enter & re-install Windows with a 4.8 GHz clock & 1.34 volts. No testing done yet, but it's at least stable involving inane tasks. Update later, for sure. :]
1.34v @ 4.8ghz is really good but try running cinebench or wprime or some sort of stress test and see if it is stable. I am going to update bios and see if i can go lower on voltage as i am at 1.38v.
post #58 of 175
here is my 5ghz overclock and wc temp. i'm working on the voltage which i know it can be lowered.




Edited by eduardmc - 1/13/11 at 3:52am
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] i7 2600k @ 4.8Ghz  [Asus] p8p67 Deluxe [Bios] 2001 [EVGA] GTX 580 SLI 950/1900/2200 1.175v [Corsair] Vengeance 8gb (2x4gb) @ 1866mhz 
Hard DriveOptical DriveCoolingOS
[Crucial] M4 256gb Raid 0 (128gb x2) [Samsung] Blu-ray  Watercool  [Win7] ultimate 64bit 
MonitorKeyboardPowerCase
[Yamakasi] 27" 2560x1440 S-ips [Logitech] iluminated wire [ENERMAX] MaxRevo 1350W [Corsair] 800D 
MouseMouse PadAudio
[CM] Storm [Steelseries] Qck+ Creative titanium HD 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] i7 2600k @ 4.8Ghz  [Asus] p8p67 Deluxe [Bios] 2001 [EVGA] GTX 580 SLI 950/1900/2200 1.175v [Corsair] Vengeance 8gb (2x4gb) @ 1866mhz 
Hard DriveOptical DriveCoolingOS
[Crucial] M4 256gb Raid 0 (128gb x2) [Samsung] Blu-ray  Watercool  [Win7] ultimate 64bit 
MonitorKeyboardPowerCase
[Yamakasi] 27" 2560x1440 S-ips [Logitech] iluminated wire [ENERMAX] MaxRevo 1350W [Corsair] 800D 
MouseMouse PadAudio
[CM] Storm [Steelseries] Qck+ Creative titanium HD 
  hide details  
Reply
post #59 of 175
It would be nice if you included your BIOS settings, LIKE EIST , CE1 , TURBO, LLC, and all those little settings so other ppl can copy those to get to 4.8 stable under 1.4v ....I know it depends on chips but i still want to know the bios settings you have .
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k p67a-UD7 570 gtx 1600 mhz GSKILL ripjaw 1.5 
Hard DriveOSMonitorPower
c300 crucial 128 gb WIN 7 64bit 26" ASUS corsair 850HX 
Case
HAF-X 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k p67a-UD7 570 gtx 1600 mhz GSKILL ripjaw 1.5 
Hard DriveOSMonitorPower
c300 crucial 128 gb WIN 7 64bit 26" ASUS corsair 850HX 
Case
HAF-X 
  hide details  
Reply
post #60 of 175
Quote:
Originally Posted by faiz23 View Post
got a 2600k chip last night and was running it on a stock cooler. Picked up a cheapo cooler till i get the noctua d14 to do some overclocking. Intel cooler was junk and i could only run at 4.1 or 4.2ghz stock and would get like 75 degree temps. The new cooler gave me like 15-20 degree drop. I can clock to 4.8 on 1.366v and stable no issues and temps are 72 degree under load. Right now i am experimenting and running at 45x and 100 blck and 1.272v stable no issues. I am not going to go over 1.4v for now and do not want to attempt 5.0ghz till i get a high end air cooler. Not going to be messing around with watercooling since air cooling works just fine. I am happy at 4.5 and nice to see it can hit 4.8ghz and stay under 1.4. Using ddr3 ram 1600mhz @ 1.65v but running it at 1.60v. Any questions let me know and i can answer them. I have not ran a vantage with the new cooler which is a Thermaltake Contac 29 (Yes i know junk but better than stock) but here is some benches from last night.

4.1ghz







4.8ghz




What are your bios settings ?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k p67a-UD7 570 gtx 1600 mhz GSKILL ripjaw 1.5 
Hard DriveOSMonitorPower
c300 crucial 128 gb WIN 7 64bit 26" ASUS corsair 850HX 
Case
HAF-X 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k p67a-UD7 570 gtx 1600 mhz GSKILL ripjaw 1.5 
Hard DriveOSMonitorPower
c300 crucial 128 gb WIN 7 64bit 26" ASUS corsair 850HX 
Case
HAF-X 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Post your Sandy bridge OCs