Overclock.net › Forums › Intel › Intel CPUs › Do you think is it possible to use intel sandy bride 2600k @ 5.5 GHZ daily with water
New Posts  All Forums:Forum Nav:

Do you think is it possible to use intel sandy bride 2600k @ 5.5 GHZ daily with water - Page 3

post #21 of 108
Thread Starter 
Quote:
Originally Posted by ScurK;11970892 
The maximum VID for the Q6600 is 1,5V, so 1,45V shouldn't do too much. But the voltage stated on the intel homepage doesn't tell you jack about what's good for your chip.

What's stated on intels homepage is the VID range, which means how much voltage your chip will need to run at stock speeds. That has nothing to do with how much voltage you can feed it before killing it, but I'd advise to stay within VID range anyway.

In reality, no-one can tell how much the SB chips can take until someone kills a chip by using too much voltage. Serious overvolting is stupid for 24/7 anyway, water cooling or not. smile.gif

i used for a time period at 1.55 Volt too

but later cpu can't handle that much overclock so i decreased

so what is the VID range for sandy bridge 2600k
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
post #22 of 108
Thread Starter 
Quote:
Originally Posted by microman;11971052 
lets bottom line this for ya 5.5ghz Not gonna happen! i would look more towards 4.5ghz

i am pretty sure i will be able to use it at least 5.1 GHZ

people are seeing 5 ghz with air cooling
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
post #23 of 108
you arent going to have 5.1ghz at a usable voltage... keep it under 1.37 or be prepared to buy a new chip. This isnt like the Q6600. i remember putting 1.9v into my 6600's while benching and they would take it and smile, i can assure you that will not be the case with these 32nm chips.
    
CPUMotherboardGraphicsRAM
i7 2600k 5000mhz(so far) ASUS MAXIMUS IV EXTREME msi 6970 and 2 6950's Mushkin Enhanced Blackline 2133mhz 
Hard DriveOptical DriveOSMonitor
Force GT(os) M4 64gb(games) f3 1tb(other) Samsung Windows 7 64bit Samsung BX2450 
KeyboardPowerCaseMouse
Black widow XFX ProSeries 1050W PSU 80+Gold  Corsair 700D Deathadder 
Mouse Pad
nope! 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 2600k 5000mhz(so far) ASUS MAXIMUS IV EXTREME msi 6970 and 2 6950's Mushkin Enhanced Blackline 2133mhz 
Hard DriveOptical DriveOSMonitor
Force GT(os) M4 64gb(games) f3 1tb(other) Samsung Windows 7 64bit Samsung BX2450 
KeyboardPowerCaseMouse
Black widow XFX ProSeries 1050W PSU 80+Gold  Corsair 700D Deathadder 
Mouse Pad
nope! 
  hide details  
Reply
post #24 of 108
Quote:
Originally Posted by Dopamin3;11970942 
lol

Q6600 is 65nm. This is 32nm. Whole different ballgame son.

This.

Voltage will become a problem long before temps, even on air. Watercooling is a waste with SB.

There's no way you're going to run even 5 for an extended period of time. The people hitting 5 are using almost 1.6 vcore.

What don't you people understand about 1.5v + 32nm = bad! don't you understand?

Ask the few folks around here that had to RMA their 32nm Gultowns.. they weren't pushing anywhere -near- 1.5 vcore. Look up the threads about it.

EDIT: "but later cpu can't handle that much overclock so i decreased"

Yeah.. keep this in mind when you keep telling people to run their sandys at 5.1 ghz. rolleyes.gif
Why upgrade?
(14 items)
 
Why overclock?!
(15 items)
 
 
CPUMotherboardGraphicsRAM
Core i5 760 ASUS 55i Sabertooth EVGA 960 4GB 8gb 1600mhz Vengeance 
Hard DriveHard DriveOSMonitor
120gb Intel 320 (OS) 500gb Samsung 850 Evo Win 7 64 Viewsonic VX2250-Wm 
PowerCaseMouseAudio
Seasonic G 550w Gold Lancool PC-K9B Logitech G5 X-Fi Titanium/AT-H700 
CPUMotherboardGraphicsRAM
Core i5 4690k Asus Z97 Sabertooth mk2 EVGA 970 8gb Kingston 1833mhz 
Hard DriveHard DriveCoolingOS
128GB Samsung 830 500GB Samsung 840 Evo allota fans but quiet! Win 7 64 
MonitorKeyboardPowerCase
Dell U2311H Rev. A01 Mechanical w/ Cherry Blues NZXT Hale 650w NZXT Phantom - white 
MouseMouse PadAudio
Anker CG100 Steelseries 9HD Sennheiser HD555 
  hide details  
Reply
Why upgrade?
(14 items)
 
Why overclock?!
(15 items)
 
 
CPUMotherboardGraphicsRAM
Core i5 760 ASUS 55i Sabertooth EVGA 960 4GB 8gb 1600mhz Vengeance 
Hard DriveHard DriveOSMonitor
120gb Intel 320 (OS) 500gb Samsung 850 Evo Win 7 64 Viewsonic VX2250-Wm 
PowerCaseMouseAudio
Seasonic G 550w Gold Lancool PC-K9B Logitech G5 X-Fi Titanium/AT-H700 
CPUMotherboardGraphicsRAM
Core i5 4690k Asus Z97 Sabertooth mk2 EVGA 970 8gb Kingston 1833mhz 
Hard DriveHard DriveCoolingOS
128GB Samsung 830 500GB Samsung 840 Evo allota fans but quiet! Win 7 64 
MonitorKeyboardPowerCase
Dell U2311H Rev. A01 Mechanical w/ Cherry Blues NZXT Hale 650w NZXT Phantom - white 
MouseMouse PadAudio
Anker CG100 Steelseries 9HD Sennheiser HD555 
  hide details  
Reply
post #25 of 108
I like how people come on here with little to no knowledge and spit it like it's fact.

The 1.6v you saw was from reviewers just setting it there instead of trying to find stable lower voltage.

People have done 5+ on less than 1.5v.
    
CPUMotherboardGraphicsGraphics
Intel Core i5 2500K P8P67 PRO NVIDIA GeForce GTX 470 NVIDIA GeForce GTX 470 
GraphicsRAMRAMRAM
NVIDIA GeForce 9800 GT G-Skill A-Data G-Skill 
RAMHard DriveOptical DriveOS
A-Data Crucial M4 64GB + 1TB F3 Spinpoint $155 LS/DL DVD RW $?? Windows 8 64-bit "Epic Registry" Edition 
MonitorPowerCase
ASUS 21.5 1920x1080 2ms $135 CORSAIR HX850 $120 Mother Earth $free 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i5 2500K P8P67 PRO NVIDIA GeForce GTX 470 NVIDIA GeForce GTX 470 
GraphicsRAMRAMRAM
NVIDIA GeForce 9800 GT G-Skill A-Data G-Skill 
RAMHard DriveOptical DriveOS
A-Data Crucial M4 64GB + 1TB F3 Spinpoint $155 LS/DL DVD RW $?? Windows 8 64-bit "Epic Registry" Edition 
MonitorPowerCase
ASUS 21.5 1920x1080 2ms $135 CORSAIR HX850 $120 Mother Earth $free 
  hide details  
Reply
post #26 of 108
Quote:
Originally Posted by BallaTheFeared;11971239 
I like how people come on here with little to no knowledge and spit it like it's fact.

The 1.6v you saw was from reviewers just setting it there instead of trying to find stable lower voltage.

People have done 5+ on less than 1.5v.

whats your point?
    
CPUMotherboardGraphicsRAM
i7 2600k 5000mhz(so far) ASUS MAXIMUS IV EXTREME msi 6970 and 2 6950's Mushkin Enhanced Blackline 2133mhz 
Hard DriveOptical DriveOSMonitor
Force GT(os) M4 64gb(games) f3 1tb(other) Samsung Windows 7 64bit Samsung BX2450 
KeyboardPowerCaseMouse
Black widow XFX ProSeries 1050W PSU 80+Gold  Corsair 700D Deathadder 
Mouse Pad
nope! 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 2600k 5000mhz(so far) ASUS MAXIMUS IV EXTREME msi 6970 and 2 6950's Mushkin Enhanced Blackline 2133mhz 
Hard DriveOptical DriveOSMonitor
Force GT(os) M4 64gb(games) f3 1tb(other) Samsung Windows 7 64bit Samsung BX2450 
KeyboardPowerCaseMouse
Black widow XFX ProSeries 1050W PSU 80+Gold  Corsair 700D Deathadder 
Mouse Pad
nope! 
  hide details  
Reply
post #27 of 108
You cant use the Q6600 as a reference for overclocking Sandy. Q6600 is a beast. It can take 1.6v no problems. I had mine like this for almost 3 years. I hope whe can use enough voltage to get 5Ghz 24/7 as long it stays below 70c. I want a 2600k for folding biggrin.gif
Captain Crunch
(12 items)
 
  
CPUMotherboardGraphicsGraphics
3770k @ 4.6Ghz Asus Z77 Sabertooth EVGA GeForce GTX 660 Ti FTW+ 3GB w/Backplate (SLI) Waiting For GTX 780  
RAMHard DriveCoolingOS
Samsung 2133Mhz 10-10-10-28 1T OCZ SSD Corsair H100 P/P Windows 7 
MonitorKeyboardPowerCase
Monoprice 2560x1440p Ducky Shine Corsair AX1200 Cooler Master 690 
  hide details  
Reply
Captain Crunch
(12 items)
 
  
CPUMotherboardGraphicsGraphics
3770k @ 4.6Ghz Asus Z77 Sabertooth EVGA GeForce GTX 660 Ti FTW+ 3GB w/Backplate (SLI) Waiting For GTX 780  
RAMHard DriveCoolingOS
Samsung 2133Mhz 10-10-10-28 1T OCZ SSD Corsair H100 P/P Windows 7 
MonitorKeyboardPowerCase
Monoprice 2560x1440p Ducky Shine Corsair AX1200 Cooler Master 690 
  hide details  
Reply
post #28 of 108
Eh. You might want to wait for a new stepping if you're hoping for such speeds.
GE60
(13 items)
 
  
CPUGraphicsHard DriveOS
Intel Core i5 4200M Geforce GTX760M 750GB WD Scorpio Black Windows 7 Home Premium 
MonitorKeyboardMouseMouse Pad
15.6" CM Quickfire Rapid CM Xornet Steelseries QcK+ 
  hide details  
Reply
GE60
(13 items)
 
  
CPUGraphicsHard DriveOS
Intel Core i5 4200M Geforce GTX760M 750GB WD Scorpio Black Windows 7 Home Premium 
MonitorKeyboardMouseMouse Pad
15.6" CM Quickfire Rapid CM Xornet Steelseries QcK+ 
  hide details  
Reply
post #29 of 108
IMO, no and here is why.
post #30 of 108
Quote:
Originally Posted by BallaTheFeared;11971239 
I like how people come on here with little to no knowledge and spit it like it's fact.

The 1.6v you saw was from reviewers just setting it there instead of trying to find stable lower voltage.

People have done 5+ on less than 1.5v.

The guy from OC3D explicitly said he tried to get it stable on a lower voltage, and couldn't. He wasn't the only one.

Show me a few people with 5ghz stable, on less than 1.4 volts. You'd have to be bats- crazy to run a 32nm chip on ~1.45-1.5vcore. Again, I point you to the Gulftown RMA threads..

When you say someones wrong, it helps if you actually have some proof yourself.
Why upgrade?
(14 items)
 
Why overclock?!
(15 items)
 
 
CPUMotherboardGraphicsRAM
Core i5 760 ASUS 55i Sabertooth EVGA 960 4GB 8gb 1600mhz Vengeance 
Hard DriveHard DriveOSMonitor
120gb Intel 320 (OS) 500gb Samsung 850 Evo Win 7 64 Viewsonic VX2250-Wm 
PowerCaseMouseAudio
Seasonic G 550w Gold Lancool PC-K9B Logitech G5 X-Fi Titanium/AT-H700 
CPUMotherboardGraphicsRAM
Core i5 4690k Asus Z97 Sabertooth mk2 EVGA 970 8gb Kingston 1833mhz 
Hard DriveHard DriveCoolingOS
128GB Samsung 830 500GB Samsung 840 Evo allota fans but quiet! Win 7 64 
MonitorKeyboardPowerCase
Dell U2311H Rev. A01 Mechanical w/ Cherry Blues NZXT Hale 650w NZXT Phantom - white 
MouseMouse PadAudio
Anker CG100 Steelseries 9HD Sennheiser HD555 
  hide details  
Reply
Why upgrade?
(14 items)
 
Why overclock?!
(15 items)
 
 
CPUMotherboardGraphicsRAM
Core i5 760 ASUS 55i Sabertooth EVGA 960 4GB 8gb 1600mhz Vengeance 
Hard DriveHard DriveOSMonitor
120gb Intel 320 (OS) 500gb Samsung 850 Evo Win 7 64 Viewsonic VX2250-Wm 
PowerCaseMouseAudio
Seasonic G 550w Gold Lancool PC-K9B Logitech G5 X-Fi Titanium/AT-H700 
CPUMotherboardGraphicsRAM
Core i5 4690k Asus Z97 Sabertooth mk2 EVGA 970 8gb Kingston 1833mhz 
Hard DriveHard DriveCoolingOS
128GB Samsung 830 500GB Samsung 840 Evo allota fans but quiet! Win 7 64 
MonitorKeyboardPowerCase
Dell U2311H Rev. A01 Mechanical w/ Cherry Blues NZXT Hale 650w NZXT Phantom - white 
MouseMouse PadAudio
Anker CG100 Steelseries 9HD Sennheiser HD555 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • Do you think is it possible to use intel sandy bride 2600k @ 5.5 GHZ daily with water
Overclock.net › Forums › Intel › Intel CPUs › Do you think is it possible to use intel sandy bride 2600k @ 5.5 GHZ daily with water