Originally Posted by PhattyBoomBatty
Are any of you using offset to overclock to 5Ghz? If so, I'd like to know what amount of offset you are using in conjunction with your LLC level to obtain stability. I'm having difficulty dialing in the offset voltage so that I have a high enough level of voltage at low loads without also having excessive amounts of voltage at full load.
I use offset... I was using an offset of + 3.0
I lowered that since then... I can get in windows all the way down at + 2.0 but instant bsod when I run prime... I can also pass IBT at like +2.3.
but I think I'm going to mess with my settings to see if I can use LLC and a lower offset.
edit: I can only not bsod out of prime if im at +2.9 or higher... I liked to give the processor some extra juice just to seal the deal to 3.0. Which is what I ran my 5.0Ghz @.
edit: could this be why my system seems like it needs more volts than everyone elses to stay stable? Just curious... I won't try this till I get home tonight so any help is always appreciated.Edited by AMDMAXX - 2/24/11 at 11:45am