Overclock.net › Forums › Intel › Intel CPUs › Having problems with my overclock
New Posts  All Forums:Forum Nav:

Having problems with my overclock

post #1 of 26
Thread Starter 
Hello everyone,

I'm having stability issues with my overclock. I'm not very knowledgeable with the terms & acronyms in the BIOS, especially for voltage control, so I really don't know what each value does. I'm not sure how to adjust my overclock to make it more stable. Up until now I've relied mostly on suggestions from other knowledgeable people.

I've attached screenshots of my various BIOS configuration pages. Based on the values in those images, is there anything I can change to make my system slightly more stable?

Occasionally I will get BSoD's. Also my RAID will lose data and have to rebuild itself sometimes, especially after a BSoD crash. Prime95 and other stress tests work fine, so I'm not sure where the instability is coming from. Anyway, if someone could just have a look over my BIOS configuration and point out anything that could be adjusted for overall improvement, I'm sure that'll have an affect on things!

Thanks in advance.



post #2 of 26
What are you running for stability tests and how long? Your vCore is a little low for that clock but its not insanely low. What stop codes are you getting from your BSOD?
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
post #3 of 26
Thread Starter 
Quote:
Originally Posted by kschat View Post
What are you running for stability tests and how long? Your vCore is a little low for that clock but its not insanely low. What stop codes are you getting from your BSOD?
I didn't keep track of them. I'll be sure to post that information here the next time I get one. However, I don't want to wait around for another BSoD. For the time being, do you see anything I could change?

The main thing I'm running for a test is Prime95. Sometimes I just let it run for an hour or two, others I let it run over night while I sleep. I never have any issues with it in either case.
post #4 of 26
Quote:
Originally Posted by MrDoomMaster View Post
I didn't keep track of them. I'll be sure to post that information here the next time I get one. However, I don't want to wait around for another BSoD. For the time being, do you see anything I could change?

The main thing I'm running for a test is Prime95. Sometimes I just let it run for an hour or two, others I let it run over night while I sleep. I never have any issues with it in either case.
I would bump your vcore up.
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
post #5 of 26
Thread Starter 
Quote:
Originally Posted by kschat View Post
I would bump your vcore up.
What is your recommended CPU VCore value in respect to what I have it set to already?
post #6 of 26
Quote:
Originally Posted by MrDoomMaster View Post
What is your recommended CPU VCore value in respect to what I have it set to already?
Well every chip is different so you just have to bump it up, run a stability test if it freezes or BSOD just bump up again.
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
post #7 of 26
Thread Starter 
Well I just had another BSoD and I made sure to take note of the stop code. It was:

0x00000109

Also because of this BSoD, I bumped up my vcore to 1.31 (the next step up).
post #8 of 26
Although this tutorial isn't specific to your motherboard it might help explain what some of the acronyms are for you.

http://i4memory.com/f109/evga-x58-cl...-thread-17928/
un-overkill
(16 items)
 
Hadron 290x
(10 items)
 
 
CPUMotherboardGraphicsGraphics
Xeon E5-2695v3 Asus X99 Workstation Titan X Pascal Titan X Pascal 
RAMHard DriveHard DriveHard Drive
128GB Samsung 2133mhz ECC Samsung 950 Pro 512GB 3x Samsung 1TB SSD 1x 1.92TB SSD 
CoolingOSMonitorKeyboard
Corsair H105 Win10 x64 Acer Predator X34 Logitech G710+ 
PowerCaseMouseAudio
LEPA G1600 Corsair Air 540 Logitech G700S Bose 
CPUMotherboardGraphicsRAM
i5-4670k ASRock Z87E-ITX R9 290x 8GB Dominator 2Ghz CL9 
Hard DriveHard DriveCoolingOS
Samsung 250GB SSD Seagate 3TB  EVGA ACX ITX Win8.1 ENT 64 
MonitorCase
Dell U2412H EVGA Hadron Air 
  hide details  
Reply
un-overkill
(16 items)
 
Hadron 290x
(10 items)
 
 
CPUMotherboardGraphicsGraphics
Xeon E5-2695v3 Asus X99 Workstation Titan X Pascal Titan X Pascal 
RAMHard DriveHard DriveHard Drive
128GB Samsung 2133mhz ECC Samsung 950 Pro 512GB 3x Samsung 1TB SSD 1x 1.92TB SSD 
CoolingOSMonitorKeyboard
Corsair H105 Win10 x64 Acer Predator X34 Logitech G710+ 
PowerCaseMouseAudio
LEPA G1600 Corsair Air 540 Logitech G700S Bose 
CPUMotherboardGraphicsRAM
i5-4670k ASRock Z87E-ITX R9 290x 8GB Dominator 2Ghz CL9 
Hard DriveHard DriveCoolingOS
Samsung 250GB SSD Seagate 3TB  EVGA ACX ITX Win8.1 ENT 64 
MonitorCase
Dell U2412H EVGA Hadron Air 
  hide details  
Reply
post #9 of 26
Quote:
Originally Posted by kschat View Post
I would bump your vcore up.
yes. always a good first step after bsod. increase increase increase. if you get bsod while running prime95 increase your uncore voltage.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k p8p67 deluxe reference gtx 680 Ripjaws(blue)1866, 8-9-8-24-2t 
Hard DriveOptical DriveOSMonitor
c300, 2X WD CAVAIAR BLACK 640GB RAID 0 LG Bluray/Dvd Rewriter 7 Ult Gateway 24" lcd 1920x1200 
KeyboardPowerCaseMouse
Lycosa Corsair 750w tx Cooler Master HAF 932 black g9 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k p8p67 deluxe reference gtx 680 Ripjaws(blue)1866, 8-9-8-24-2t 
Hard DriveOptical DriveOSMonitor
c300, 2X WD CAVAIAR BLACK 640GB RAID 0 LG Bluray/Dvd Rewriter 7 Ult Gateway 24" lcd 1920x1200 
KeyboardPowerCaseMouse
Lycosa Corsair 750w tx Cooler Master HAF 932 black g9 
  hide details  
Reply
post #10 of 26
Quote:
Originally Posted by MrDoomMaster View Post
Well I just had another BSoD and I made sure to take note of the stop code. It was:

0x00000109

Also because of this BSoD, I bumped up my vcore to 1.31 (the next step up).
Ok good, remember to watch your temps whenever you bump your vcore.

Quote:
Originally Posted by Dark View Post
Although this tutorial isn't specific to your motherboard it might help explain what some of the acronyms are for you.

http://i4memory.com/f109/evga-x58-cl...-thread-17928/
This is a nice tutorial, it will definitely help a lot! I have another one that might help as well. It explains all the aspects of the Nehalem architecture and tells you what everything does:

http://www.maximumpc.com/article/fea...lem_its_limits
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
baby cakes
(13 items)
 
Macbook 4,1
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7 930 [4.01Ghz vCore 1.28125 HT on] GA-X58A-UD3R ZOTAC GTX 460 1GB SLI [840/1680/1900 @stock volts] CORSAIR XMS3 6GB (3 x 2GB) 1600Mhz 
Hard DriveOptical DriveOSMonitor
C300 64GB SATA III, 2x F3 1TB 7200rpm RAID 0 Sony Optiarc 24X DVD/CD Ubuntu 14.04 22" Dell SP2009W 1680x1050 
PowerCase
CORSAIR HX 750W Cooler Master HAF 922 
CPUMotherboardGraphicsRAM
Core 2 Duo 2.4Ghz Penryn T8300 Some logical board GMA X3100 4GB (2x2GB) DDR2 667Mhz 
Hard DriveOptical DriveOSMonitor
Hitachi 160 GB 5400 RPM SATA II Combo drive OSX 10.6.4 (Snow leopard) 13.3" 1280x800 TFT 
PowerCase
Dying battery White macbook case 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Having problems with my overclock