Your vcore is pretty high, might be QPI/VTT. What are your settings at? Can you post a screen shot?
Keep in mind it is a C0 chip, and they have been proven to need more voltage than a D0. QPI/VTT is at 1.36, I'll jot down everything else in a bit and post it up
I never learned the BSOD codes (I'm picking them up as I go), but for a C0 your overclock is fairly good I believe, I think it is likely to be voltage but it might be worth posting some other settings quickly.
Of course your temps aren't near dangerous at the moment, you could always give it a touch of V-core to see if that fixes the issue ^-^
This is what I was going by
BSOD codes for overclocking
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)