Overclock.net › Forums › Intel › Intel Motherboards › ASUS P8P67Pro-2600K-1053 Bios-Offset Overclocking settings
New Posts  All Forums:Forum Nav:

ASUS P8P67Pro-2600K-1053 Bios-Offset Overclocking settings

post #1 of 6
Thread Starter 
There was a post on a another forum about using Offset Voltage on their overclock. This got me thinking so I spent a few hours messin around with OFFSET overclocking. biggrin.gif

I'm back at 4.7Ghz, very stable, with a max of 1.4v and the voltage and CPU freq change as needed. So it's only MAX if I need it and so far running all the Just Cause benchmarks have not put my temps over 52c. I can still get the chip to 90c in Intel Burn test with MAX settings but that's not real world running. All other test tools never go above 80c.

Anyway here the settings to adjust. Mine are in ().

Quote:
In the EFI Bios
Go to Advanced Menu
Go to Ai Overclocking Menu

>>>Set Ai OC Tuner
Manual
>>>BLCK Freq should always be 100
>>>Turbo Ratio
By All Cores
>>>Set the Core speed as Desired (I did 47)
>>>Internal PLL
Enabled
>>>Memory Freq
Auto or if you have better than 1333MHz speed, make that selection
>>> EPU Power switching
Enabled
>>> EPU Setting
Auto

Go in the CPU Power Management

>>>Set CPU Ratio as Desired
(I did 47)
>>>Enhanced Speed Step
Enabled
>>> Turbo mode
Enabled
All other modes
AUTO
ESC back to the Ai OC Tuner

Digi+VRM

>>>Load Line Calibration
Ultra High
>>>VRM
AUTO
>>> Phase
Extreme
>>>Duty Cycle ---- T.Probe
>>>CPU Capability
100%
>>>CPU Voltage
Offset
Offset Mode Sign
+
CPU Offset
As Desired (Mine is 0.050 for 1.4v max shown in CPUZ)

ALL else is set to AUTO

Hope this helps some others here.
Edited by nmanley - 1/18/11 at 8:03am
post #2 of 6
Thread Starter 
I revised my settings some and now have a stable 4.8GHz @1.42v. OH YEAH!!!!! biggrin.gif
Since IBT punishes the CPU so hard the temps are the max my system will see. I've not gone over 57c in other benchmark game test consisting of 3DMARK06, 3DMARK11, AvP D3D11 Benchmark, and all three in Just Cause.

Here are the new setting changes:
Quote:
In the EFI Bios
Go to Advanced Menu
Go to Ai Overclocking Menu

>>>Set Ai OC Tuner
Manual
>>>BLCK Freq should always be 100
>>>Turbo Ratio
By All Cores
>>>Set the Core speed as Desired (I did 47) (This changes when adjusted in CPU pwr management below)
>>>Internal PLL
Enabled
>>>Memory Freq
Auto or if you have better than 1333MHz speed, make that selection
>>> EPU Power switching
Enabled
>>> EPU Setting
Auto

Go in the CPU Power Management

>>>Set CPU Ratio as Desired
I did 47 (Bumped up to 48)
>>>Enhanced Speed Step
Enabled
>>> Turbo mode
Enabled
All other modes
AUTO
ESC back to the Ai OC Tuner

Digi+VRM

>>>Load Line Calibration
Ultra High
>>>VRM
AUTO (Changed to Manual and set to 350)
>>> Phase
Extreme
>>>Duty Cycle ---- T.Probe (Changed to Extreme)
>>>CPU Capability
100%
>>>CPU Voltage
Offset
Offset Mode Sign
+
CPU Offset
As Desired --- Mine is 0.050 for 1.4v max (Bumped this up to 0.065)

ALL else is set to AUTO

2600K_4800Mhz_IBT.jpg
Edited by nmanley - 1/18/11 at 10:22am
post #3 of 6
Don't forget to test with Prime95. IBT doesn't really stress these chips.
post #4 of 6
those are some high temps, bad h70 bad.

btw change the duty cycle extreme and see if it's stable at lower volts?
Hamber Brige
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8P67 Pro MSI GTX 570 G.SKILL Ripjaws 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB WD Black too expansive can't afford Windows 7 Pro too expansive can't afford 
KeyboardPowerCaseMouse
too expansive can't afford Corsair AX850 NZXT Phantom Alienware TactX 
  hide details  
Reply
Hamber Brige
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8P67 Pro MSI GTX 570 G.SKILL Ripjaws 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB WD Black too expansive can't afford Windows 7 Pro too expansive can't afford 
KeyboardPowerCaseMouse
too expansive can't afford Corsair AX850 NZXT Phantom Alienware TactX 
  hide details  
Reply
post #5 of 6
hey puffs i am planning a simalar build to yours what temps are you getting.are you OCing?

would love some advice
post #6 of 6
1.33 volts i get about 62-64 max temp
Hamber Brige
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8P67 Pro MSI GTX 570 G.SKILL Ripjaws 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB WD Black too expansive can't afford Windows 7 Pro too expansive can't afford 
KeyboardPowerCaseMouse
too expansive can't afford Corsair AX850 NZXT Phantom Alienware TactX 
  hide details  
Reply
Hamber Brige
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8P67 Pro MSI GTX 570 G.SKILL Ripjaws 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB WD Black too expansive can't afford Windows 7 Pro too expansive can't afford 
KeyboardPowerCaseMouse
too expansive can't afford Corsair AX850 NZXT Phantom Alienware TactX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › ASUS P8P67Pro-2600K-1053 Bios-Offset Overclocking settings