Overclock.net › Forums › AMD › AMD CPUs › Having some 1090T sensor trouble.
New Posts  All Forums:Forum Nav:

Having some 1090T sensor trouble.

post #1 of 11
Thread Starter 
Hey guys. Having a tough time with this. :/

CPU at stock. (3.2Ghz)

1. Why does it downclock when not at load?
Where can i monitor/control this behavior?

2. Core Temp 0.99.8 is not giving me any readings.
Why is that?

3. HWMonitor and Speed Fan 4.42 are giving me three diff. temps from
sensors, where are these located?

4. I NEED to know my CPUs temp and its
reading as 0 in Core Temp and Speed Fan and HWMonitor.

5. How do I control fan speeds through SpeedFan?

6. Is there any other software for control over fans?

HWMonitor:



CPU-Z:



CoreTemp:



Speedfan:


Edited by dejanribic - 1/17/11 at 5:58pm
post #2 of 11
it downclocks because of cool n quiet, can be disabled in the bios.

do you have acc enabled in your bios, that will shut off temp monitoring, the temps you are seeing in speed fan are things such as motherboard temp, and chipset temps, the 80c temp is to be disregarded because it doesn't change so it is a misreading of somesort, or just not a temp probe.

your best bet for controlling fans is a fan controller.
normally motherboard controls are really iffy. my board can control three fans. two normal fans and the CPU fan, but all other headers are full on all the time.

http://www.frozencpu.com/products/93...?tl=g47c17s239
this is a good controller for the money.
post #3 of 11
Thread Starter 
Quote:
Originally Posted by thrasherht View Post
it downclocks because of cool n quiet, can be disabled in the bios.

do you have acc enabled in your bios, that will shut off temp monitoring, the temps you are seeing in speed fan are things such as motherboard temp, and chipset temps, the 80c temp is to be disregarded because it doesn't change so it is a misreading of somesort, or just not a temp probe.

your best bet for controlling fans is a fan controller.
normally motherboard controls are really iffy. my board can control three fans. two normal fans and the CPU fan, but all other headers are full on all the time.

http://www.frozencpu.com/products/93...?tl=g47c17s239
this is a good controller for the money.
Thanks, will look into it, how can I monitor CPU temp though?
post #4 of 11
Your core tempature's are disabled becasue you have ACC (Advanced Core Calibration) enabled in the BIOS

And the core tempature are unreliable and it's advisable to read the main CPU Tempature off the socket
The Ancient
(14 items)
 
FZ-G1
(8 items)
 
 
CPUMotherboardGraphicsRAM
Phenom X6 1055T 3.9GHz NB 3.0GHz ASUS Crosshair V  GTX 770 8GB G.Skill TridentX 1652MHz CL7-7-8-20-22 1T 
Hard DriveOptical DriveCoolingOS
OCZ 60GB Vertex 2E - 3x HDD's Samsung Blu-Ray Drive Custom W/C Loop Windows 7 64bit 
PowerCase
Superflower Leadex 650W Coolermaster Storm Scout Mod 
CPUGraphicsRAMHard Drive
Core i5-3437U Intel HD4000 8GB 256GB SSD 
OSMonitorKeyboardCase
Windows 8 Pro 10.1 WUXGA Touchscreen Worlds Durable Tablet 
  hide details  
Reply
The Ancient
(14 items)
 
FZ-G1
(8 items)
 
 
CPUMotherboardGraphicsRAM
Phenom X6 1055T 3.9GHz NB 3.0GHz ASUS Crosshair V  GTX 770 8GB G.Skill TridentX 1652MHz CL7-7-8-20-22 1T 
Hard DriveOptical DriveCoolingOS
OCZ 60GB Vertex 2E - 3x HDD's Samsung Blu-Ray Drive Custom W/C Loop Windows 7 64bit 
PowerCase
Superflower Leadex 650W Coolermaster Storm Scout Mod 
CPUGraphicsRAMHard Drive
Core i5-3437U Intel HD4000 8GB 256GB SSD 
OSMonitorKeyboardCase
Windows 8 Pro 10.1 WUXGA Touchscreen Worlds Durable Tablet 
  hide details  
Reply
post #5 of 11
i think i had to disable core unlocker or something like that to get my core temps to show up. just disable cool and quiet, ce1, core unlocker (i have an asus board). but as others have said, you should go with cpu temp, not core temps for a 1055t. and in windows change your power setting in the control panel to high performance.

this is what i did when i first oc, but after a while the fans were so loud that i had to change it all back lol. gotta get a fan controller before i can oc any further.

*edit*
your cpu temp should be Temp1 in speedfan and i think it should be TMPIN0 in hwmonitor. only way to be sure is to monitor it when you run prime95, linx, etc... and see which temps go up.
Edited by kdo99 - 1/18/11 at 3:49am
Twilight Samurai
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T ASUS M4A88TD-V EVO/USB3 XFX Double D Radeon HD 6870 1GB  G.SKILL Ripjaws 1600 2x4GB 
Hard DriveOSMonitorKeyboard
X25-M 120GB SSD Win7 Pro 64x Samsung BX2450 24" Filco MJ2 Tenkeyless Brown 
PowerCaseMouse
SeaSonic X650 Gold LIAN LI PC-9F Logitech G9 
  hide details  
Reply
Twilight Samurai
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T ASUS M4A88TD-V EVO/USB3 XFX Double D Radeon HD 6870 1GB  G.SKILL Ripjaws 1600 2x4GB 
Hard DriveOSMonitorKeyboard
X25-M 120GB SSD Win7 Pro 64x Samsung BX2450 24" Filco MJ2 Tenkeyless Brown 
PowerCaseMouse
SeaSonic X650 Gold LIAN LI PC-9F Logitech G9 
  hide details  
Reply
post #6 of 11
Thread Starter 
Quote:
Originally Posted by Atomfix View Post
Your core tempature's are disabled becasue you have ACC (Advanced Core Calibration) enabled in the BIOS

And the core tempature are unreliable and it's advisable to read the main CPU Tempature off the socket
How would I go about doing this? I will be getting a controller soon, how can I set the probe up on the socket?

Also, what is the best torture test that I can run so my CPU fan cranks up to its highest.

I started Prime95 small FFTs right before this post, and its running at 4500RPM so far, steadily rising, but I want to see if it will really go up to 6000RPM, max ive seen so far i 5000RPM...
post #7 of 11
Also, some boards will downclock if the mosfets get too hot as I have experienced. Adding some airflow resolved this for me.
Luminescence v2.2
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K 4.4Ghz @ 1.32v MSI X99S SLI Krait Edition GIGABYTE GeForce GTX 980Ti 6GB G1 GAMING OC EDI... 16GB Corsair Vengeance LPX DDR4 3000mhz @ 3200m... 
Hard DriveHard DriveCoolingOS
2x Spinpoint 1TB 240GB Patriot Blaze SSD Corsair H100i GTX Windows 10 Professional x64 
MonitorKeyboardPowerCase
Dell U2412M x2 - LG 34UM95 Razer Black Widow Ultimate Thermaltake TR2 RX 850w Phanteks P400 
MouseMouse PadAudioAudio
Razer Naga 2014 Razer Goliathus LG Soundbar Creative Sound Blaster Tactic 3D Wrath 
  hide details  
Reply
Luminescence v2.2
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K 4.4Ghz @ 1.32v MSI X99S SLI Krait Edition GIGABYTE GeForce GTX 980Ti 6GB G1 GAMING OC EDI... 16GB Corsair Vengeance LPX DDR4 3000mhz @ 3200m... 
Hard DriveHard DriveCoolingOS
2x Spinpoint 1TB 240GB Patriot Blaze SSD Corsair H100i GTX Windows 10 Professional x64 
MonitorKeyboardPowerCase
Dell U2412M x2 - LG 34UM95 Razer Black Widow Ultimate Thermaltake TR2 RX 850w Phanteks P400 
MouseMouse PadAudioAudio
Razer Naga 2014 Razer Goliathus LG Soundbar Creative Sound Blaster Tactic 3D Wrath 
  hide details  
Reply
post #8 of 11
Thread Starter 
Quote:
Originally Posted by kdo99 View Post
i think i had to disable core unlocker or something like that to get my core temps to show up. just disable cool and quiet, ce1, core unlocker (i have an asus board). but as others have said, you should go with cpu temp, not core temps for a 1055t. and in windows change your power setting in the control panel to high performance.

this is what i did when i first oc, but after a while the fans were so loud that i had to change it all back lol. gotta get a fan controller before i can oc any further.

*edit*
your cpu temp should be Temp1 in speedfan and i think it should be TMPIN0 in hwmonitor. only way to be sure is to monitor it when you run prime95, linx, etc... and see which temps go up.
Its Temp2 in Speedfan, and TMPIN1 in HWMonitor for me, based on prime95
post #9 of 11
Thread Starter 
anyone?
post #10 of 11
1) Screw TMPIN2. Mine's at 128ºC ALWAYS.

2) Speed lowers because of AMD Cool'n'Quiet. Disable it if you hate it. I do because it sucks for rush CPU-Z validations to have 1.2GHz instead of 4.6GHz due to this crap downclocking my system.

3) According to my HWMonitor, TMPIN0 should be your processor and TMPIN1 your board.


Hope that's been helpful
   
AGP bencher
(14 items)
 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 Gigabyte GA-AX370-Gaming 5 Sapphire HD 6950 2GiB 2x8GB KFA2 HOF DDR4-3600 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 256GB Seagate 600 Series 240GB Seagate 7200.14 2TB Samsung F3 1TB 
CoolingCoolingCoolingCooling
EKWB Supreme HF XSPC Rasa GPU EK XT360 EK 4.0 
OSMonitorMonitorKeyboard
W10 Pro LG IPS235 LG E2250V KUL ES-87 
PowerCaseMouseAudio
SF Leadex II 650W Lian Li PC-A05NB Logitech G9 Xonar DX 
AudioAudio
SMSL SA-S3+Technics CB-250 Sennheiser HD555 
CPUMotherboardRAMHard Drive
AMD A10-5700 Gigabyte F2A75M-HD2 G.SKILL Ares 2133 CL9 Hitachi 5K750 
Hard DriveCoolingOSMonitor
Momentus .7 200GB Noctua NH-L9a Server 2012 R2 Standard AUO B156HW01 
PowerCaseOther
PicoPSU-80-WI-25V AIO Aluminium Handmade TP-Link Archer Something Something Wi-Fi AC 
CPUCPUCPUMotherboard
Core2Duo E6400 Core2Quad Q6600 Pentium Dual Core E5200 AsRock 4COREDUAL-SATA2 R2.0 
GraphicsRAMHard DriveOptical Drive
A dumpload of ancient AGP cards Kingston Value DDR2-667 CL4 2T @CL3 1T Seagate 160GB 7200.10 LG IDE DVD-ROM 
CoolingCoolingOSMonitor
Ghettomade CPU waterblock 49cc 2stroke engine copper radiator WinXP SP2 32bit ProView 17" 
PowerCase
Tacens Radix V 550W Ghetto aluminium bench 
  hide details  
Reply
   
AGP bencher
(14 items)
 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 Gigabyte GA-AX370-Gaming 5 Sapphire HD 6950 2GiB 2x8GB KFA2 HOF DDR4-3600 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 256GB Seagate 600 Series 240GB Seagate 7200.14 2TB Samsung F3 1TB 
CoolingCoolingCoolingCooling
EKWB Supreme HF XSPC Rasa GPU EK XT360 EK 4.0 
OSMonitorMonitorKeyboard
W10 Pro LG IPS235 LG E2250V KUL ES-87 
PowerCaseMouseAudio
SF Leadex II 650W Lian Li PC-A05NB Logitech G9 Xonar DX 
AudioAudio
SMSL SA-S3+Technics CB-250 Sennheiser HD555 
CPUMotherboardRAMHard Drive
AMD A10-5700 Gigabyte F2A75M-HD2 G.SKILL Ares 2133 CL9 Hitachi 5K750 
Hard DriveCoolingOSMonitor
Momentus .7 200GB Noctua NH-L9a Server 2012 R2 Standard AUO B156HW01 
PowerCaseOther
PicoPSU-80-WI-25V AIO Aluminium Handmade TP-Link Archer Something Something Wi-Fi AC 
CPUCPUCPUMotherboard
Core2Duo E6400 Core2Quad Q6600 Pentium Dual Core E5200 AsRock 4COREDUAL-SATA2 R2.0 
GraphicsRAMHard DriveOptical Drive
A dumpload of ancient AGP cards Kingston Value DDR2-667 CL4 2T @CL3 1T Seagate 160GB 7200.10 LG IDE DVD-ROM 
CoolingCoolingOSMonitor
Ghettomade CPU waterblock 49cc 2stroke engine copper radiator WinXP SP2 32bit ProView 17" 
PowerCase
Tacens Radix V 550W Ghetto aluminium bench 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Having some 1090T sensor trouble.