Overclock.net › Forums › AMD › AMD CPUs › AMD 1055T - 4 GHz Unstable
New Posts  All Forums:Forum Nav:

AMD 1055T - 4 GHz Unstable - Page 2

post #11 of 35
Thread Starter 
Quote:
Originally Posted by adamlau View Post
Start easy with a 14 multiplier x 200 MHz bus for CPU @ 1.40v, CPU-NB 2600 MHz @ 1.25v, HTT 2000 Mhz @ [Auto].
I took a look at the voltage for my CPU/NB and it starts to show me abit of a warning sign after 1.225V.

And thank you for your tip I really appreciate the help.

Regards

Kentan900
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #12 of 35
Don't worry about the yellow, or the red .
ThermoChilled
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1100T ASUS Crosshair IV Extreme EVGA GTX 580 SuperClocked STT WX200UB2G7 
Hard DriveOptical DriveOSMonitor
VelociRaptor WD6000HLHX Sony Optiarc AD-7260S Arch Linux x86_64 + JWM NEC MultiSync PA241W-BK 
KeyboardPowerCaseMouse
Topre Realforce 87UKB Corsair CMPSU-850AX Lian Li Tyr PC-X500FX Logitech G9x 
Mouse Pad
ZOWIE GEAR P-TF 
  hide details  
Reply
ThermoChilled
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1100T ASUS Crosshair IV Extreme EVGA GTX 580 SuperClocked STT WX200UB2G7 
Hard DriveOptical DriveOSMonitor
VelociRaptor WD6000HLHX Sony Optiarc AD-7260S Arch Linux x86_64 + JWM NEC MultiSync PA241W-BK 
KeyboardPowerCaseMouse
Topre Realforce 87UKB Corsair CMPSU-850AX Lian Li Tyr PC-X500FX Logitech G9x 
Mouse Pad
ZOWIE GEAR P-TF 
  hide details  
Reply
post #13 of 35
Thread Starter 
Quote:
Originally Posted by adamlau View Post
Don't worry about the yellow, or the red .
Correct me if Im wrong.

The NB freq needs to be around 2500 MHz and HT under 2000 MHz?

If I understand this right I should put the CPU/NB at 1.225V and HT at auto?

Should I put my memory voltage at 1.65V?

Regards

Kentan900
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #14 of 35
1.22v is not stock volts. It's higher than that. My CPU runs 1.47v on turbo (stock).
Paradise
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T @ 3.7ghz Gigabyte GA-890GPA-UD3H XFX 5770 Crossfire 4x2GB G.Skill Ripjaws DDR3 1600 
Hard DriveOSMonitorKeyboard
64GB MC SSD, 2x320 7200.10, 2x2TB Green Caviar Windows 7 Ultimate Samsung 205BW & 32" Panasonic LCD G15 
PowerCaseMouse
Corsair HX620 (FTW) CoolerMaster HAF 932 MX518 
  hide details  
Reply
Paradise
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T @ 3.7ghz Gigabyte GA-890GPA-UD3H XFX 5770 Crossfire 4x2GB G.Skill Ripjaws DDR3 1600 
Hard DriveOSMonitorKeyboard
64GB MC SSD, 2x320 7200.10, 2x2TB Green Caviar Windows 7 Ultimate Samsung 205BW & 32" Panasonic LCD G15 
PowerCaseMouse
Corsair HX620 (FTW) CoolerMaster HAF 932 MX518 
  hide details  
Reply
post #15 of 35
Thread Starter 
Quote:
Originally Posted by PeaceMaker View Post
1.22v is not stock volts. It's higher than that. My CPU runs 1.47v on turbo (stock).
No you got me wrong my friend.

I was asking if I should put the CPU/NB volt at 1.225V since mine is under 1.2V.

My CPU is using 1.39V at 3.5 GHz right now and trying to go higher.

Regards

Kentan900
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #16 of 35
CPU-NB 2600 MHz @ 1.225v is fine. Remember: You have a CIV Formula .
ThermoChilled
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1100T ASUS Crosshair IV Extreme EVGA GTX 580 SuperClocked STT WX200UB2G7 
Hard DriveOptical DriveOSMonitor
VelociRaptor WD6000HLHX Sony Optiarc AD-7260S Arch Linux x86_64 + JWM NEC MultiSync PA241W-BK 
KeyboardPowerCaseMouse
Topre Realforce 87UKB Corsair CMPSU-850AX Lian Li Tyr PC-X500FX Logitech G9x 
Mouse Pad
ZOWIE GEAR P-TF 
  hide details  
Reply
ThermoChilled
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1100T ASUS Crosshair IV Extreme EVGA GTX 580 SuperClocked STT WX200UB2G7 
Hard DriveOptical DriveOSMonitor
VelociRaptor WD6000HLHX Sony Optiarc AD-7260S Arch Linux x86_64 + JWM NEC MultiSync PA241W-BK 
KeyboardPowerCaseMouse
Topre Realforce 87UKB Corsair CMPSU-850AX Lian Li Tyr PC-X500FX Logitech G9x 
Mouse Pad
ZOWIE GEAR P-TF 
  hide details  
Reply
post #17 of 35
The NB freq needs to be around 2500 MHz and HT under 2000 MHz?

NB 2500 Mhz+ is desirable,CPU-NB 1.2 flat should be adequate
(my mate has crosshair/1055T@2800Mhz NB frequency using 1.2! every build slightly different though might have to raise slightly I wouldnt go over 1.25 there for safety)

Change Ht-link multi to get AS CLOSE TO 2000Mhz as possible, shouldnt matter slight over/under, keep HT voltage stock

If I understand this right I should put the CPU/NB at 1.225V and HT at auto?

Explained above

Should I put my memory voltage at 1.65V?

Only If it is rated to handle it, dont overvolt your RAM unless sure its going to help and if you do very slightly could be okay, I wouldnt bother though.

Good luck!
Another 3570K
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K @ 4.6ghz Gigabyte Z77X-D3H  GB 7970 @ 1100/1500 8GB Corsair V LP 1600mhz  
Hard DriveCoolingMonitorPower
Intel 330 series 240GB Noctua NH-D14 1080p 24" + 27" Antec HCG 620W 
CaseAudioAudioAudio
HAF XM Yamaha RX-V373 Accusound 8.8XD 180W Signature 8" 3-way  Auzentech meridian 7.1 2G 
Audio
Audio Technica AD700X 
  hide details  
Reply
Another 3570K
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K @ 4.6ghz Gigabyte Z77X-D3H  GB 7970 @ 1100/1500 8GB Corsair V LP 1600mhz  
Hard DriveCoolingMonitorPower
Intel 330 series 240GB Noctua NH-D14 1080p 24" + 27" Antec HCG 620W 
CaseAudioAudioAudio
HAF XM Yamaha RX-V373 Accusound 8.8XD 180W Signature 8" 3-way  Auzentech meridian 7.1 2G 
Audio
Audio Technica AD700X 
  hide details  
Reply
post #18 of 35
hey bud, play with your Motherboard voltages, keep HT link frequencies and NB freq Near 2ghz for now till u get ur desired CPU clock then deal with the NB freq. theres not much we can do to help u. all hardware is different, just tweak. I have my NB @ 1.45V and my HT Link ! 1.325V VDDA Volt: 2.5750V. the Ram, should be fine @ up to 1.7V mines @ 1.6875V but generally its ram related if your PC doesnt post. like i said, just play arround with things, the Crosshair IV has a pretty good Bios and itll tell u various things like if ur voltages are a bit too generous.

Ps: Make sure u have the newest Bios Update, when I updated my Bios, I got a 200Mhz Boost...
Bertha
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T |4.3GHZ @ 1.52V| Asus Crosshair IV Asus ENGTX460TOP 1GB|950Mhz/4500Mhz| Mushkin Redline DDR3 1600 | 6-8-6-24 @1.75V| 
Hard DriveOptical DriveOSMonitor
Corsair V128 + WD Green 1TB Seagate.12 1TB LG DVD Burner Sata Windows 7 Ultimate Gamer Edition 2* ASUS VH242H 
KeyboardPowerCaseMouse
Logitech G15 PC Power and Cooling Silencer 750W Corsair 650D Razor DeathAdder 
AudioAudioAudio
1978 Nikko Alpha II / Beta II Amp & Pre-Amp 1989 B&W DM550 Loudspeakers 1994 Energy ESM-1S Loudspeakers 
  hide details  
Reply
Bertha
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T |4.3GHZ @ 1.52V| Asus Crosshair IV Asus ENGTX460TOP 1GB|950Mhz/4500Mhz| Mushkin Redline DDR3 1600 | 6-8-6-24 @1.75V| 
Hard DriveOptical DriveOSMonitor
Corsair V128 + WD Green 1TB Seagate.12 1TB LG DVD Burner Sata Windows 7 Ultimate Gamer Edition 2* ASUS VH242H 
KeyboardPowerCaseMouse
Logitech G15 PC Power and Cooling Silencer 750W Corsair 650D Razor DeathAdder 
AudioAudioAudio
1978 Nikko Alpha II / Beta II Amp & Pre-Amp 1989 B&W DM550 Loudspeakers 1994 Energy ESM-1S Loudspeakers 
  hide details  
Reply
post #19 of 35
Thread Starter 
Quote:
Originally Posted by Casey Ryback View Post
The NB freq needs to be around 2500 MHz and HT under 2000 MHz?

NB 2500 Mhz+ is desirable,CPU-NB 1.2 flat should be adequate
(my mate has crosshair/1055T@2800Mhz NB frequency using 1.2! every build slightly different though might have to raise slightly I wouldnt go over 1.25 there for safety)

Change Ht-link multi to get AS CLOSE TO 2000Mhz as possible, shouldnt matter slight over/under, keep HT voltage stock

If I understand this right I should put the CPU/NB at 1.225V and HT at auto?

Explained above

Should I put my memory voltage at 1.65V?

Only If it is rated to handle it, dont overvolt your RAM unless sure its going to help and if you do very slightly could be okay, I wouldnt bother though.

Good luck!
Thank you for the information I will try it out!

Regards

Kentan900
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #20 of 35
Thread Starter 
Quote:
Originally Posted by Havokr505 View Post
hey bud, play with your Motherboard voltages, keep HT link frequencies and NB freq Near 2ghz for now till u get ur desired CPU clock then deal with the NB freq. theres not much we can do to help u. all hardware is different, just tweak. I have my NB @ 1.45V and my HT Link ! 1.325V VDDA Volt: 2.5750V. the Ram, should be fine @ up to 1.7V mines @ 1.6875V but generally its ram related if your PC doesnt post. like i said, just play arround with things, the Crosshair IV has a pretty good Bios and itll tell u various things like if ur voltages are a bit too generous.

Ps: Make sure u have the newest Bios Update, when I updated my Bios, I got a 200Mhz Boost...
Thank you very much for the information!

I will take a look in my BIOS again.

Regards

Kentan900
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › AMD 1055T - 4 GHz Unstable