Overclock.net › Forums › AMD › AMD - General › Good OC?
New Posts  All Forums:Forum Nav:

Good OC?

post #1 of 9
Thread Starter 
I'm new to the OC game so here is what I managed to pull out. My build is in the sig.

CPU: AMD Phenom II x4 945 Deneb 3.0 Ghz\\
OC @ 3690.3 Mhz
Core Volts: 1.380V
Multiplier: x15
Bus speed: 246
HT link: 2214.1 Mhz
NB Freq: 2460.1 Mhz
DRAM Freq: 656.0 Mhz
FSB.DRAM: 3:8
Mem timings (stock) 9-9-9-24 1T

EDIT: Idle temp: 35c, Full load temp: 58c, games on max settings temp: 42c.

Am I missing any info? Did I put to much? Any suggestions on modding mem timings?
Edited by CP2 - 1/20/11 at 7:27pm
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
post #2 of 9
You might be running below rated settings (I'm assuming 1600 9-9-9). If so, lower your timings to compensate of course. I think 1333 7-7-7 would be a good start.
post #3 of 9
Quote:
Originally Posted by CP2 View Post
I'm new to the OC game so here is what I managed to pull out. My build is in the sig.

CPU: AMD Phenom II x4 945 Deneb 3.0 Ghz\\
OC @ 3690.3 Mhz
Core Volts: 1.380V
Multiplier: x15
Bus speed: 246
HT link: 2214.1 Mhz
NB Freq: 2460.1 Mhz
DRAM Freq: 656.0 Mhz
FSB.DRAM: 3:8
Mem timings (stock) 9-9-9-24 1T

EDIT: Idle temp: 35c, Full load temp: 58c, games on max settings temp: 42c.

Am I missing any info? Did I put to much? Any suggestions on modding mem timings?
Try to bump the NB up to 2600MHz. I notice a big performance difference when I upped mine. Also, you could try to tighten your RAM timings to 8-8-8-24 or 7-7-7-21. AMD systems tend to like tighter timings.
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
post #4 of 9
Not too bad, good job!

You could raise the NB Freq to 2600-2800MHz and lower the HT Link closer to 2000MHz? That should give you slightly better results. Than I'd see about tightening the ram a bit.
Ryzen Build
(20 items)
 
 
Bruce
(14 items)
 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
  hide details  
Reply
Ryzen Build
(20 items)
 
 
Bruce
(14 items)
 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
  hide details  
Reply
post #5 of 9
Thread Starter 
I'll try some of these tips out folks. Thanks. I'll let you know how it turns out.
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
post #6 of 9
Thread Starter 
Ok, so I wasn't able to bring up the NB freq any. Max was 2460. And I put the HT link at 1968. I wasn't able to input exact numbers. It only had increments. And I went with 7-7-7-21. So I am stress testing as we speak. Question though. With me changing the mem timings and the HT link would I be able to up the Bus speed a notch and still be stable or do the other tweaks not show a performance boost I can actually see im numbers? Like temps or something?
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
post #7 of 9
Quote:
Originally Posted by CP2 View Post
Ok, so I wasn't able to bring up the NB freq any. Max was 2460. And I put the HT link at 1968. I wasn't able to input exact numbers. It only had increments. And I went with 7-7-7-21. So I am stress testing as we speak. Question though. With me changing the mem timings and the HT link would I be able to up the Bus speed a notch and still be stable or do the other tweaks not show a performance boost I can actually see im numbers? Like temps or something?
Try increasing the NB volts. I'm at 1.35 for 2750MHz NB. As for your question, you may be able to bump the FBS up a little more. Personally, I'd got up to 250 just to get more even numbers (damn OCD ). I don't think upping the FBS a few notches would provide a very significant performance boost, it'd be minute if there was an increase at all. Temps wouldn't raise too much either.
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
post #8 of 9
Thread Starter 
Quote:
Originally Posted by razr m3 View Post
Try increasing the NB volts. I'm at 1.35 for 2750MHz NB. As for your question, you may be able to bump the FBS up a little more. Personally, I'd got up to 250 just to get more even numbers (damn OCD ). I don't think upping the FBS a few notches would provide a very significant performance boost, it'd be minute if there was an increase at all. Temps wouldn't raise too much either.
Raising the NB volts would make my system hotter though right? hmmmm. I'll give it a shot.

I can't put in these numbers that you guys talk about. my NB wont go over 2460. and on the HT link the closest I can get to 2000 is 1968 or 2214. So is it bad that I opted for 2214?
Edited by CP2 - 1/20/11 at 8:36pm
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
post #9 of 9
Thread Starter 
Ok, so I think the changes I made tips the scale as far as voltage goes. The timing that my memory seems to like is 8-8-8-24. wouldn't boot windows with 7-7-7-21. So I'm still at 3.69Ghz until I get a better cooling system. I'm opting for liquid cooling. Never did that before. Doing the research and coming up on a decision soon.
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
Eva Red v1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500K Sandy Bridge 3.3GHz ASUS P8Z77-M PRO LGA 1155 Intel Z77  2 x - NVIDIA - GeForce GTX 460 1GB G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 
Hard DriveOSMonitorKeyboard
Seagate Barracuda 1TB and WD Caviar 1TB Windows 7 - 64 bit SAMSUNG 27 Inch Razer Anansi gaming 
PowerCaseMouse
CORSAIR Enthusiast Series CMPSU-650TX 650W Corsair 800D Cyborg RAT 7 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › Good OC?