Originally Posted by kubo
Hi guys I have a question, how should I exactly heat up distilled water for cleaning, since it comes cold. I'm just afraid of getting it contaminated, etc. Thanks.
boiling distilled water will do nothing to the water but boil it. don't listen to everyone that says don't put it in stuff. the plastic jug that the distilled water comes in is not 100% contaminate free. usually it's a recycled plastic that is regulation approved to have drinking water in it. truth is the water is cleaner than the jug. simply boil the water and pour in your radiator to clean it out. repeat method until it's very clean water. i did it to my thermochill rads 7 times. i flushed with hot water to get alot of the flux out and then filled them with boiling hot distilled water 4 times and on the 5th time i simply used warm distilled and checked for any catching the contents with a coffee filter over a big cup and a rubber band. if you don't see any flux at all then it's cleaned. it's not rocket science. hope that helps and enjoy the loop.