Overclock.net › Forums › Volt Mods › General Volt Mods › Graphics Cards Volt Mods › Gtx 285 volt modding help
New Posts  All Forums:Forum Nav:

Gtx 285 volt modding help - Page 4

post #31 of 47
no gain over the other.. your merely eliminating OCP from tripping. Once this is accomplished [regardless of resistance level required]..there is nothing more to gain with this mod.

Since the cards will experience OCP at stock settings if pushing hard and temps get warm, removing OCP simply lets you clock a bit higher and remain stable where you previously would have crashed. Anything beyond this requires getting the GPU much much cooler.
post #32 of 47
Thread Starter 
did the ocp mod, used a 10ohm resistor, but i used a different ground. to my dismay, there wasnt any difference.



my memory clocks refuse to go above stock speeds... any higher and itll crash the drivers.

its at 1242. the next strap is at 1269.
Edited by tyuo9980 - 1/31/11 at 5:22pm
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
post #33 of 47
Thread Starter 
scratch that out!

my memory clocks wont go any higher, but its stable at 738/1584/1242 right now in black ops!

edit: nope.
Edited by tyuo9980 - 2/26/11 at 6:33pm
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
post #34 of 47
Thread Starter 
started my computer up, heard a POP. i think i burnt out the resistor.

now i only have 1/4watt resistors. now should i raise the resistance or will that cause another problem?
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
post #35 of 47
Quote:
Originally Posted by tyuo9980 View Post
started my computer up, heard a POP. i think i burnt out the resistor.

now i only have 1/4watt resistors. now should i raise the resistance or will that cause another problem?
Are you sure it was a resistor and not that cap that you grounded to?
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
post #36 of 47
You CANNOT ground to a cap leg... they have NO ground... they are both positive. Use another ground.
post #37 of 47
Quote:
Originally Posted by CL3P20 View Post
You CANNOT ground to a cap leg... they have NO ground... they are both positive. Use another ground.
Exactly, it looks like he blew a cap
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
post #38 of 47
Thread Starter 
Quote:
Originally Posted by Voltage_Drop View Post
Exactly, it looks like he blew a cap
WHAT?????

omg i used a multimeter and checked that it was connected to the pci connector grounds so i thought that it was grounded...

so blowing a capacitor. what does that mean?

worse performance, shorter lifetime, etc.?

the card still works as it should tho.
Edited by tyuo9980 - 2/27/11 at 2:26pm
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
post #39 of 47
Quote:
Originally Posted by tyuo9980 View Post
WHAT?????

omg i used a multimeter and checked that it was connected to the pci connector grounds so i thought that it was grounded...

so blowing a capacitor. what does that mean?

worse performance, shorter lifetime, etc.?

the card still works as it should tho.
Im not saying that you definitely blew a cap but the grounding point you chose was a cap terminal. Just find another ground for the mod and you should be good. Thankfully the card is still operational
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
post #40 of 47
Thread Starter 
Quote:
Originally Posted by Voltage_Drop View Post
Im not saying that you definitely blew a cap but the grounding point you chose was a cap terminal. Just find another ground for the mod and you should be good. Thankfully the card is still operational
if it was a cap what would happen?
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
segfault
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-750 @ 4Ghz Gigabyte P55A-UD4P MSI GTX 770 Kingston HyperX 2x4GB 1600MHz CL9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 500GB LG 24x Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Samsung SyncMaster P2270 Steelseries 6Gv2 Corsair TX750 Thermaltake V9 Black Edition 
MouseMouse Pad
Razer Deathadder 2013 Edition Steelseries QcK 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Graphics Cards Volt Mods
Overclock.net › Forums › Volt Mods › General Volt Mods › Graphics Cards Volt Mods › Gtx 285 volt modding help