post #1 of 1
Thread Starter 
I haven't made a post like this in about a year or so. I remember when i first attempted to OC this bad boi with no voltage, and the outcome wasn't to good. Well I am going to give another crack at it, being the curious yet avid OCer I am. My goal is to push this card as far as it can go with no artifacts, on stock voltages. Currently right now here are my results.

Stock:

Clock Speed: 850Mhz
Mem Speed: 975Mhz

OC #1

Clock Speed: 900Mhz
Mem Speed: N/A 975Mhz

Furmark 1.8.2:
1680x1050
No AA
Xtreme Burning Mode
Post FX
Fullscreen

Results:
61c-65c Max
28 Minute Run
Stable
No Artifacts

Conclusion For OC #1:
I am quite satisfied with the results and I am looking to push further.

OC #2 (After I am done running the second OC and doing some stability tests, I'll come back and re edit this.)
    
CPUMotherboardGraphicsRAM
[AMD] Phenom II x4 955 C2 @ 3.6GHz 1.385v [Biostar] TA890FXE (NB @ 2400MHz 1.25v) [MSI] GTX 560 Ti TFII GE @ 1000/2000/2100 1.087v [OCZ] 4GB Gold Series DDR3 1333MHZ 9-9-9-20 2T 
Hard DriveOSMonitorKeyboard
[WD] 320GB SATA II HDD [Windows] 7 Home Premium 64bit [ASUS] VE248H 1920x1080 60Hz 2MS LED [Logitech] K120 
PowerCaseMouseMouse Pad
[Corsair] CMPSU-850TX 850W [ThermalTake] Armor (Ryūjin Case Mod) [Steelseries] Xai [Steelseries] QCK+ 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[AMD] Phenom II x4 955 C2 @ 3.6GHz 1.385v [Biostar] TA890FXE (NB @ 2400MHz 1.25v) [MSI] GTX 560 Ti TFII GE @ 1000/2000/2100 1.087v [OCZ] 4GB Gold Series DDR3 1333MHZ 9-9-9-20 2T 
Hard DriveOSMonitorKeyboard
[WD] 320GB SATA II HDD [Windows] 7 Home Premium 64bit [ASUS] VE248H 1920x1080 60Hz 2MS LED [Logitech] K120 
PowerCaseMouseMouse Pad
[Corsair] CMPSU-850TX 850W [ThermalTake] Armor (Ryūjin Case Mod) [Steelseries] Xai [Steelseries] QCK+ 
  hide details  
Reply