Originally Posted by Analog
So either 240/360, Is the installation for these kits the same as a 120mm one? The guide I saw was for installing a 120mm.
Also, I have an NZXT Phantom case, Can I fit a 240/360 in it (without modding)?
Check meh build out in meh siggy for pics of my NZXT phantom-white with a 360 G-Phobya 1.2 Black rad on the outside...
As far as the 240, you should be able to fit it, BUT, anything wider than a dime is going to hard press you if you want to do push/pull... not only that but the 200mm fans (assuming you buy a second fan, stock case only has the 1) have lots o' cfm, but very little in the way of pressure, I am not sure about the whole good/bad of that in a real world environment... point being is that it wont fit quite square, its going to be a little off by design... the fans are centerline to the case, while the mounting is off by 1/2" to be aligned with the mobo mounting plate.
Great case, but the wc solutions the manufacturer envisioned was probably not what you or I dream of, just a little too much wasted space.