Overclock.net › Forums › Intel › Intel CPUs › I7-2600k & ASUS P8P67 Deluxe (problem)
New Posts  All Forums:Forum Nav:

I7-2600k & ASUS P8P67 Deluxe (problem) - Page 4

post #31 of 41
Thread Starter 
okay i get it now:upsidedwn but why 1.376v if i set it in bios to 1.370v.

While benching it goes on 1.360v:baaasmile

for 24/7 not to exceed 1.38v right? rolleyes.gif
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
post #32 of 41
Don't use Coretemps use RealTemps the latest version has the info for our Sandy Chips

BTW like your setup very close to mine
post #33 of 41
Quote:
Originally Posted by Terra View Post
okay i get it now but why 1.376v if i set it in bios to 1.370v.

While benching it goes on 1.360v

for 24/7 not to exceed 1.38v right?
called vdroop. Almost always with these chips the load voltage is below the manually set voltage. Its just the way it is. you can enable pll voltage to try to combat this but no matter what I did with my chip vdroop was always there. For a 247 oc I reccomend like 4.5ghz with offset mode since thats the only way to have the voltage drop when the chip is not being loaded enough to require turbo to kick in. Otherwise when you set the vcore manually the voltage never drops its always at the set vcore.

Keep in mind offset should be very close to what you actually need. Setting it manually you should be able to use a bit lower than what you get in offset mode.

I run 4.5ghz in offset + mode 247.
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77x-UD5H Gigabyte hd 7850 Corsair Vengence 1600 
Hard DriveOptical DriveCoolingOS
c300 SSD rando Corsair H50 Windows 10 x64 
MonitorKeyboardPowerCase
Dell S2209W 22" TTe Sports Challenger Pro Corsair AX850 CM HAF 932 
MouseMouse PadAudio
Death Adder desk samsung makes a good soundbar 
  hide details  
Reply
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77x-UD5H Gigabyte hd 7850 Corsair Vengence 1600 
Hard DriveOptical DriveCoolingOS
c300 SSD rando Corsair H50 Windows 10 x64 
MonitorKeyboardPowerCase
Dell S2209W 22" TTe Sports Challenger Pro Corsair AX850 CM HAF 932 
MouseMouse PadAudio
Death Adder desk samsung makes a good soundbar 
  hide details  
Reply
post #34 of 41
Thread Starter 
That means these settings: http://www.xtremesystems.org/forums/showthread.php?t=265398 (efi pictures) are no go for 24/7? I use exactly the same settings, but except core voltage set to 1.37v and x46 multiplyer set in efi bios. tested it for straight 24 hours with prime and it passed all my other tests (linx, intel burn but only for 20-30 min)
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
post #35 of 41
Thread Starter 
Done what you said ckybam3. But problem is it goes straight to 1.4v (whats yours offset 4.5 volts?) That is something i dont want. i dont want to pass 1.38v at least for that long not until i see define proof on which voltages sands can hold. for 24/7

aaaaa.png
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
post #36 of 41
it might be because he has messed with the arrays and vrm settings for high overclocks. I did all that when I was pushing my limit for fun but for 247 overclock I leave everything default. I just set my ram profile to xmp so it detects correct settings. Then I set bclk to 100 and each cores multi to 45. Last thing I do is make sure pll is set to auto and offset mode is set to +. Everything else is completely default. I forget what voltage it goes to under load will check for u when i get home

you can indeed use the settings you linked above for 247. You can set the voltage manually for 247 OC if you want. I just prefer to have the clocks and voltage downclock when idling because I leave my comp on almost 247 so thats alot of unnecessary power going thru the chip when its idling overnight imo.
Edited by ckybam3 - 2/3/11 at 12:51pm
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77x-UD5H Gigabyte hd 7850 Corsair Vengence 1600 
Hard DriveOptical DriveCoolingOS
c300 SSD rando Corsair H50 Windows 10 x64 
MonitorKeyboardPowerCase
Dell S2209W 22" TTe Sports Challenger Pro Corsair AX850 CM HAF 932 
MouseMouse PadAudio
Death Adder desk samsung makes a good soundbar 
  hide details  
Reply
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77x-UD5H Gigabyte hd 7850 Corsair Vengence 1600 
Hard DriveOptical DriveCoolingOS
c300 SSD rando Corsair H50 Windows 10 x64 
MonitorKeyboardPowerCase
Dell S2209W 22" TTe Sports Challenger Pro Corsair AX850 CM HAF 932 
MouseMouse PadAudio
Death Adder desk samsung makes a good soundbar 
  hide details  
Reply
post #37 of 41
Thread Starter 
okay, ty.
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
post #38 of 41
It's a bit high voltage for 4.5GHz though but I guess it works. I get 4.8 with 1.376v on my second P8P67 Pro and 4.8 with 1.35v on my other.
The Wtfer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS P8Z68-V PRO EVGA GTX 465 w/ 470 Shaders/Memory/Clocks 8GB G.Skill DDR3 1866 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB LG 22X DVD±R DVD Burner Windows 7 Professional 64-Bit Dell U2311H + LG W2242S 
PowerCase
Corsair 750TX Coolermaster RC-692 Advanced 
  hide details  
Reply
The Wtfer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS P8Z68-V PRO EVGA GTX 465 w/ 470 Shaders/Memory/Clocks 8GB G.Skill DDR3 1866 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB LG 22X DVD±R DVD Burner Windows 7 Professional 64-Bit Dell U2311H + LG W2242S 
PowerCase
Corsair 750TX Coolermaster RC-692 Advanced 
  hide details  
Reply
post #39 of 41
Thread Starter 
ye my mistake. Now it shows 1.304 done exactly that what ckybam3 said in his last post here. (earlier i forgot to set to from duty control, phase control from extreme to auto and LLC to auto from ultra high) in other way, i set whole bios to default and done what ckybam3 said. Then prime it and shows 1.304. With these settings it wont crash? (silly question i know biggrin.gif)
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
LGA 1155
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K  ASUS P8P67 Deluxe Rev.3 Evga GTX 470 SC  Corsair Vengeance 16GB LP 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
X25-M G2 80GB  Scorpio Black Seagate Samsung Spinpoint F3 1TB 
Optical DriveCoolingOSMonitor
The cheapes i could get  Noctua Nh-D14 Windows 7 x64 Ultimate Asus VE276Q 27" 
MonitorKeyboardPowerCase
Lg Flatron L1952TQ 19" Logitech Internet 350 USB keyboard Corsair TX 950W Cooler Master CM 690 II Advanced 
MouseMouse PadAudio
Logitech MX518 Table Onboard / SteelSeries Siberia USB Soundcard 
  hide details  
Reply
post #40 of 41
Quote:
Originally Posted by Terra View Post
ye my mistake. Now it shows 1.304 done exactly that what ckybam3 said in his last post here. (earlier i forgot to set to from duty control, phase control from extreme to auto and LLC to auto from ultra high) in other way, i set whole bios to default and done what ckybam3 said. Then prime it and shows 1.304. With these settings it wont crash? (silly question i know )
it shouldnt crash as mine never crashes with offset mode set to + and ppl voltage on auto. That being said im sure its diff for every1 but I believe the way it works it actually gives a bit extra voltage than needed to cover for the vdroop and to make sure its stable. so if its giving u that voltage in offset mode you could prob set it manually a tad less and be stable (while giving up downvoltage for idle).
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77x-UD5H Gigabyte hd 7850 Corsair Vengence 1600 
Hard DriveOptical DriveCoolingOS
c300 SSD rando Corsair H50 Windows 10 x64 
MonitorKeyboardPowerCase
Dell S2209W 22" TTe Sports Challenger Pro Corsair AX850 CM HAF 932 
MouseMouse PadAudio
Death Adder desk samsung makes a good soundbar 
  hide details  
Reply
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77x-UD5H Gigabyte hd 7850 Corsair Vengence 1600 
Hard DriveOptical DriveCoolingOS
c300 SSD rando Corsair H50 Windows 10 x64 
MonitorKeyboardPowerCase
Dell S2209W 22" TTe Sports Challenger Pro Corsair AX850 CM HAF 932 
MouseMouse PadAudio
Death Adder desk samsung makes a good soundbar 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › I7-2600k & ASUS P8P67 Deluxe (problem)