Creation of my water temp monitor :
First of all, I bought a Thermaltake Flow TX plus Flow meter.
After unpacking the meter, I immediately see the fitting was on 3/8 and nothing possible to put on 1/2.
I decide to waste everything on the kit except the LCD display for temp monitoring, so I cut wire and put the flow meter in the garbage.
I found a cheap thermometer and now I only have to use my brain...
I cut the probe of the cheap thermometer, and waste it after that.
After that, I use heatshrink and wire to rebuilt the lcd monitor cable.
I decide to put my probe in the res, so I drilled the res's cap.
Now, if the wiring is in only one "run", it won't be very cool for future maintenance. I made a modular probe in the res.
All the probe system look like that.
After doing the probe, I install to the lcd monitor and test if all was good, I check temp accuracy with my home temp monitor and all was good.
Enjoy my new temp monitor.
BONUS : thermometer without probe : LOLEdited by xk3tchuPx - 12/31/11 at 2:56pm