Overclock.net › Forums › Software, Programming and Coding › Operating Systems › BSOD - All components @ Stock
New Posts  All Forums:Forum Nav:

BSOD - All components @ Stock - Page 2

post #11 of 18
I can gather two things from your first linked minidump, this and/or this is the problem.

Check out both of them.
post #12 of 18
well i took a look at your second minidump and its blaming your ati drivers
bad drivers or card is going down the drain

On Sat 1/29/2011 11:13:47 AM GMT your computer crashed
crash dump file: C:\\Windows\\Minidump\\012911-23437-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0x90817)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8800574C817, 0xFFFFF88007CE38F0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmdag.sys .
Google query: atikmdag.sys SYSTEM_SERVICE_EXCEPTION
Edited by theproodnoob - 1/29/11 at 4:57am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K ASUS P8P67 PRO gtx 260 superclocked edition G.SKILL Ripjaws X Series 2GB(4) 
Hard DriveOSMonitorPower
Corsair C300 64gb SSD windows 7 x64 Samsung SyncMaster 2333SW CORSAIR CMPSU-650TX 650W 
CaseMouse
NZXT Phantom white logitech g5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K ASUS P8P67 PRO gtx 260 superclocked edition G.SKILL Ripjaws X Series 2GB(4) 
Hard DriveOSMonitorPower
Corsair C300 64gb SSD windows 7 x64 Samsung SyncMaster 2333SW CORSAIR CMPSU-650TX 650W 
CaseMouse
NZXT Phantom white logitech g5 
  hide details  
Reply
post #13 of 18
It could be a horrid combination of all three
post #14 of 18
Id try a different PSU out, its unlikely, but our family pc has had a lot of issues all pointing to either the memory blue screen or an ATI driver crash, I replaced the motherboard and graphics card and had the same issues again, you might be experiencing the same thing?
    
CPUMotherboardGraphicsRAM
AMD FX-8350 Black Edition MSI 990FXA-GD80 - 990FX Powercolor HD7950 PCS+ 3GB Kingston HyperX 2 X 4GB 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility III 60 GB SSD Crucial 250GB SSD Samsung Spinpoint F3 1 TB Hitachi Deskstar 250 GB 
Optical DriveCoolingOSMonitor
Samsung Blu Ray Drive Thermolab Baram + Coolermaster Sickleflow 120mm... Windows 7 X64 Phillips 24" 244EL 1080p Monitor 
KeyboardPowerCaseMouse
Roccat Arvo Compact Gaming Keyboard XFX Core Edition PRO 750W PSU NZXT Tempest 410 Elite Roccat Kone [+] Gaming Mouse 
Mouse Pad
Roccat Sense Adrenalin Blue 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD FX-8350 Black Edition MSI 990FXA-GD80 - 990FX Powercolor HD7950 PCS+ 3GB Kingston HyperX 2 X 4GB 1600Mhz 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility III 60 GB SSD Crucial 250GB SSD Samsung Spinpoint F3 1 TB Hitachi Deskstar 250 GB 
Optical DriveCoolingOSMonitor
Samsung Blu Ray Drive Thermolab Baram + Coolermaster Sickleflow 120mm... Windows 7 X64 Phillips 24" 244EL 1080p Monitor 
KeyboardPowerCaseMouse
Roccat Arvo Compact Gaming Keyboard XFX Core Edition PRO 750W PSU NZXT Tempest 410 Elite Roccat Kone [+] Gaming Mouse 
Mouse Pad
Roccat Sense Adrenalin Blue 
  hide details  
Reply
post #15 of 18
Have an idea for the graphic test run a game and check the temperature all so se if the bsod appears
Black
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 2.3Ghz ASRock N68-S XFX 9600GT Patroit 4GB DDR2 800Mhz 
Hard DriveOSMonitorPower
Hitachi 500GB HDD Windows 7 Enterprise x64 Acer AL1716 Chieftec GPS-450A 
  hide details  
Reply
Black
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 2.3Ghz ASRock N68-S XFX 9600GT Patroit 4GB DDR2 800Mhz 
Hard DriveOSMonitorPower
Hitachi 500GB HDD Windows 7 Enterprise x64 Acer AL1716 Chieftec GPS-450A 
  hide details  
Reply
post #16 of 18
Thread Starter 
i ran ATItool/Furmark with no problems for 2 hours...but it did BSOD one time but i dont if it was just a coincidence.
post #17 of 18
Thread Starter 
Quote:
Originally Posted by theproodnoob View Post
well i took a look at your second minidump and its blaming your ati drivers
bad drivers or card is going down the drain

On Sat 1/29/2011 11:13:47 AM GMT your computer crashed
crash dump file: C:\\Windows\\Minidump\\012911-23437-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0x90817)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8800574C817, 0xFFFFF88007CE38F0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmdag.sys .
Google query: atikmdag.sys SYSTEM_SERVICE_EXCEPTION
so then it might be my gpu? i'll reinstall the driver now..
post #18 of 18
Thread Starter 
updated my driver, running furmark+atitool
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Operating Systems
Overclock.net › Forums › Software, Programming and Coding › Operating Systems › BSOD - All components @ Stock