Overclock.net › Forums › Case Mods & Cases › Computer Cases › need advice on nzxt m59 case cooling
New Posts  All Forums:Forum Nav:

need advice on nzxt m59 case cooling

post #1 of 3
Thread Starter 
i'm planning on getting the nzxt m59 next week with a new cpu cooler for my sig rig. i like the look and the features of it for an amazing price. i plan to leave the side fan it has and then move the rear exhaust fan it comes with as an intake in the bottom front. then put a more powerful fan for the exhaust. i already have this one so i want to make use of it.

the question is I want to utilize the two 120mm fan spots on the top if can but I'm not sure if my cpu cooler would interfere. i'm planning on getting something like the 212+, but i guess the only way to tell is when i actually start putting everything in?

i'm also not sure if getting a 2nd fan for push/pull is worth it? wuold it be better to get push/pull and mount the cooler north/south to blow out the top and not even get the extra fans?


thanks
Old Reliable
(15 items)
 
  
CPUMotherboardGraphicsRAM
955BE C3 @ 3.82 GHz [1.404v Load] ASUS M4A88T-V EVO/USB3 [2.8 GHz NB @ 1.318v] ASUS ROG STRIX RX 470 2x4GB G.SKILL Ripjaws [1600 8-8-8-24 @ 1.5v] 
Hard DriveOptical DriveCoolingOS
320GB WD Caviar Blue Sony Optiarc DVD RW AD-7260S ATA XSPC Rasa 750 RS240 [Backplate Mod] [MX-2] Windows 7 Ultimate 64-Bit 
MonitorKeyboardPowerCase
Acer H236HLbid  Logitech K120 OCZ ModXStream Pro 600W Modular NZXT M59 [5 x 120mm Fans + Rheobus Fan Controller] 
MouseAudioAudio
Logitech MX518 ASUS Xonar DG + Logitech Z523 Turtle Beach Ear Force X11s 
  hide details  
Reply
Old Reliable
(15 items)
 
  
CPUMotherboardGraphicsRAM
955BE C3 @ 3.82 GHz [1.404v Load] ASUS M4A88T-V EVO/USB3 [2.8 GHz NB @ 1.318v] ASUS ROG STRIX RX 470 2x4GB G.SKILL Ripjaws [1600 8-8-8-24 @ 1.5v] 
Hard DriveOptical DriveCoolingOS
320GB WD Caviar Blue Sony Optiarc DVD RW AD-7260S ATA XSPC Rasa 750 RS240 [Backplate Mod] [MX-2] Windows 7 Ultimate 64-Bit 
MonitorKeyboardPowerCase
Acer H236HLbid  Logitech K120 OCZ ModXStream Pro 600W Modular NZXT M59 [5 x 120mm Fans + Rheobus Fan Controller] 
MouseAudioAudio
Logitech MX518 ASUS Xonar DG + Logitech Z523 Turtle Beach Ear Force X11s 
  hide details  
Reply
post #2 of 3
push/pull adds about 30% more heat dissipation over standard push in most cases. I would have it blowing upwards so that it is pushing the heat away from all of your parts. I would also have two fans on top helping with exhaust. This will give you better temps for Cpu intensive work, but with gpu intensive work you want the push/pull setup horizontal instead of vertical because in vertical it pull the air from right over the gpu (which will be hot)
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
post #3 of 3
Thread Starter 
thanks for the reply. after researching on OCN and google it seems adding a second fan can have different results for everyone (mostly between ~1-8 degrees). i think i will instead put two 120mm on the top and if the 212+ doesn't fit, just turn it in the north/south direction and have it blow out the top then. so there will be 3 120mm exhaust fans right near the heatsink, so the pull fan wouldn't really be necessary i guess.
Old Reliable
(15 items)
 
  
CPUMotherboardGraphicsRAM
955BE C3 @ 3.82 GHz [1.404v Load] ASUS M4A88T-V EVO/USB3 [2.8 GHz NB @ 1.318v] ASUS ROG STRIX RX 470 2x4GB G.SKILL Ripjaws [1600 8-8-8-24 @ 1.5v] 
Hard DriveOptical DriveCoolingOS
320GB WD Caviar Blue Sony Optiarc DVD RW AD-7260S ATA XSPC Rasa 750 RS240 [Backplate Mod] [MX-2] Windows 7 Ultimate 64-Bit 
MonitorKeyboardPowerCase
Acer H236HLbid  Logitech K120 OCZ ModXStream Pro 600W Modular NZXT M59 [5 x 120mm Fans + Rheobus Fan Controller] 
MouseAudioAudio
Logitech MX518 ASUS Xonar DG + Logitech Z523 Turtle Beach Ear Force X11s 
  hide details  
Reply
Old Reliable
(15 items)
 
  
CPUMotherboardGraphicsRAM
955BE C3 @ 3.82 GHz [1.404v Load] ASUS M4A88T-V EVO/USB3 [2.8 GHz NB @ 1.318v] ASUS ROG STRIX RX 470 2x4GB G.SKILL Ripjaws [1600 8-8-8-24 @ 1.5v] 
Hard DriveOptical DriveCoolingOS
320GB WD Caviar Blue Sony Optiarc DVD RW AD-7260S ATA XSPC Rasa 750 RS240 [Backplate Mod] [MX-2] Windows 7 Ultimate 64-Bit 
MonitorKeyboardPowerCase
Acer H236HLbid  Logitech K120 OCZ ModXStream Pro 600W Modular NZXT M59 [5 x 120mm Fans + Rheobus Fan Controller] 
MouseAudioAudio
Logitech MX518 ASUS Xonar DG + Logitech Z523 Turtle Beach Ear Force X11s 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › need advice on nzxt m59 case cooling