Overclock.net › Forums › Intel › Intel CPUs › Sandybridge Problem isn't that bad at all.
New Posts  All Forums:Forum Nav:

Sandybridge Problem isn't that bad at all. - Page 2

post #11 of 42
Quote:
Originally Posted by luvsan View Post
....yea, screw the writer put it on the old ports.

It's not suppose to KILL anything just not perform as it should if it degrades in the long run.
Oh ok, thanks!

Don't really care about the DVD Writer, I barely use it, and not like I care if it degrades either

As long as my HDD and SSD are fine on the gray SATA 3 ports I'll be happy.
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
post #12 of 42
Quote:
Originally Posted by luvsan View Post
....yea, screw the writer put it on the old ports.

It's not suppose to KILL anything just not perform as it should if it degrades in the long run.
Lol thats a good thing for me cause I never use my disc drive (only when I install windows or copy files onto my cd).

hehehe ^^
post #13 of 42
Ok, done. HDD and SSD are on the gray sata ports (Sata 6.0Gb/s, Sata3) and the DVD Writer is on the light blue, which are those f*cked up Sata 2 lol.
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
post #14 of 42
Quote:
Originally Posted by kcuestag View Post
Oh ok, thanks!

Don't really care about the DVD Writer, I barely use it, and not like I care if it degrades either

As long as my HDD and SSD are fine on the gray SATA 3 ports I'll be happy.
Just to be perfectly clear.

The controller itself degrades, I'm pretty sure intel said it doesn't affect data integrity so it really shouldn't hurt it, just if the sata ports degrade your cd burner might not work as fast until eventually dieing the controller not the burner.

I wouldn't want drives on it tho just in case it goofs up and puts bad smart errors on your stuff then you gotta deal with it reporting problems cause that info is stored on the drive.

This is also suppose to take years, but who knows I say screw it if it's not messing up anything else until i need the other ports later of course but that's later need muh build now.
Goomah
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k P67-UD4 ASUS GTX 560 TI G.SKILL Ripjaws+ Turbulence II Series 2000mhz 
Hard DriveOptical DriveMonitorKeyboard
2x Samsung f3 raid 0 None! T.V. Rosewill RK-9000 Mechanical 
PowerCaseMouse
ABS SL 1050W (Overkill) HAF X Deathadder 
  hide details  
Reply
Goomah
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k P67-UD4 ASUS GTX 560 TI G.SKILL Ripjaws+ Turbulence II Series 2000mhz 
Hard DriveOptical DriveMonitorKeyboard
2x Samsung f3 raid 0 None! T.V. Rosewill RK-9000 Mechanical 
PowerCaseMouse
ABS SL 1050W (Overkill) HAF X Deathadder 
  hide details  
Reply
post #15 of 42
The (SATA 2) ports could most certainly fail outright. Error checking should theoretically protect your data (by slowing things down and forcing info to be resent), but once the errors pile up, the drive will just be disconnected and unable to reconnect to the controller, or be seen by the system.

Using a lower PCH core and I/O voltage, and/or giving the PCH better cooling should prolong the life of the ports. So will using the ports less heavily (a DVD drive probably wouldn't be an issue at all).

This isn't an enormous deal for many, but for my uses, it would be unacceptable. I have five hard drives, and plan on adding more in the near future. I also use all of them quite heavily. However, if you only have two drives and an optical drive, you would probably never see any issues.

Also, it's not a Sandy Bridge problem, it's a Cougar Point problem.
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
post #16 of 42
Quote:
Originally Posted by Blameless View Post
The (SATA 2) ports could most certainly fail outright. Error checking should theoretically protect your data (by slowing things down and forcing info to be resent), but once the errors pile up, the drive will just be disconnected and unable to reconnect to the controller, or be seen by the system.

Using a lower PCH core and I/O voltage, and/or giving the PCH better cooling should prolong the life of the ports. So will using the ports less heavily (a DVD drive probably wouldn't be an issue at all).

This isn't an enormous deal for many, but for my uses, it would be unacceptable. I have five hard drives, and plan on adding more in the near future. I also use all of them quite heavily. However, if you only have two drives and an optical drive, you would probably never see any issues.

Also, it's not a Sandy Bridge problem, it's a Cougar Point problem.
Blameless, maybe you can help me.

Yesterday, after reading a lot about this issue and before I swapped my 2 drives (HDD and DVD burner) to the gray ports (Sata III), I ran an HD Tune test, and it had what appeared to be normal speeds:

Minimum read rate: 72 MB/s

Maximum read rate: 90.8 MB/s

Average read rate: 72 MB/s.

However, the "heath" tab there was a yellow highlight (warning) on the "Reallocated Sector Count" line.

All the other sections were OK, but in the overall health status it said "Warning".

Is this probably because of age, or could it be related to the SATA II port that it was connected to until now?
Son of a Bridge
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.2ghz | 1.24v Asus P8P67 EVO [B3 Revision] Sapphire HD6870 1GB GDDR5 @ 1ghz Core 4GB Kingston HyperX DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar P7K500 500gb 16MB Cache SATA II SATA LG DVD burner Windows 7 Ultimate x64 Acer LCD 17" 1280x1024 
PowerCaseMouseMouse Pad
Corsair TX650 Modded regular case X7 X-760H 2000 DPI N@NO 
  hide details  
Reply
Son of a Bridge
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.2ghz | 1.24v Asus P8P67 EVO [B3 Revision] Sapphire HD6870 1GB GDDR5 @ 1ghz Core 4GB Kingston HyperX DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar P7K500 500gb 16MB Cache SATA II SATA LG DVD burner Windows 7 Ultimate x64 Acer LCD 17" 1280x1024 
PowerCaseMouseMouse Pad
Corsair TX650 Modded regular case X7 X-760H 2000 DPI N@NO 
  hide details  
Reply
post #17 of 42
Quote:
Originally Posted by PanicProne View Post
Blameless, maybe you can help me.

Yesterday, after reading a lot about this issue and before I swapped my 2 drives (HDD and DVD burner) to the gray ports (Sata III), I ran an HD Tune test, and it had what appeared to be normal speeds:

Minimum read rate: 72 MB/s

Maximum read rate: 90.8 MB/s

Average read rate: 72 MB/s.

However, the "heath" tab there was a yellow highlight (warning) on the "Reallocated Sector Count" line.

All the other sections were OK, but in the overall health status it said "Warning".

Is this probably because of age, or could it be related to the SATA II port that it was connected to until now?
Those hard drives are a bit old, I say it's due to the age, and not because of the SATA II ports, as I've been using my HDD and SSD on SATA II ports since beggining of January and have not noticed any errors on HD Tune.
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
post #18 of 42
Quote:
Originally Posted by kcuestag View Post
Those hard drives are a bit old, I say it's due to the age, and not because of the SATA II ports, as I've been using my HDD and SSD on SATA II ports since beggining of January and have not noticed any errors on HD Tune.
I hope you're right

Also, can you tell me the difference between the grey SATA III ports and the dark blue ones?

I know the light blue ports are SATA II, but I was wondering if the differently coloured SATA III ports would make a difference in performance.

Since our EVO mobo has 4 SATA III ports... I think I can manage without an RMA.
Son of a Bridge
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.2ghz | 1.24v Asus P8P67 EVO [B3 Revision] Sapphire HD6870 1GB GDDR5 @ 1ghz Core 4GB Kingston HyperX DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar P7K500 500gb 16MB Cache SATA II SATA LG DVD burner Windows 7 Ultimate x64 Acer LCD 17" 1280x1024 
PowerCaseMouseMouse Pad
Corsair TX650 Modded regular case X7 X-760H 2000 DPI N@NO 
  hide details  
Reply
Son of a Bridge
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.2ghz | 1.24v Asus P8P67 EVO [B3 Revision] Sapphire HD6870 1GB GDDR5 @ 1ghz Core 4GB Kingston HyperX DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar P7K500 500gb 16MB Cache SATA II SATA LG DVD burner Windows 7 Ultimate x64 Acer LCD 17" 1280x1024 
PowerCaseMouseMouse Pad
Corsair TX650 Modded regular case X7 X-760H 2000 DPI N@NO 
  hide details  
Reply
post #19 of 42
Quote:
Originally Posted by PanicProne View Post
Blameless, maybe you can help me.

Yesterday, after reading a lot about this issue and before I swapped my 2 drives (HDD and DVD burner) to the gray ports (Sata III), I ran an HD Tune test, and it had what appeared to be normal speeds:

Minimum read rate: 72 MB/s

Maximum read rate: 90.8 MB/s

Average read rate: 72 MB/s.

However, the "heath" tab there was a yellow highlight (warning) on the "Reallocated Sector Count" line.

All the other sections were OK, but in the overall health status it said "Warning".

Is this probably because of age, or could it be related to the SATA II port that it was connected to until now?
You get bad sectors as time goes on with older drives just the way it goes.

Only problem is if your using all your drives space and it can't reallocate those sectors. Or eventually running out of sectors of course.
Goomah
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k P67-UD4 ASUS GTX 560 TI G.SKILL Ripjaws+ Turbulence II Series 2000mhz 
Hard DriveOptical DriveMonitorKeyboard
2x Samsung f3 raid 0 None! T.V. Rosewill RK-9000 Mechanical 
PowerCaseMouse
ABS SL 1050W (Overkill) HAF X Deathadder 
  hide details  
Reply
Goomah
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k P67-UD4 ASUS GTX 560 TI G.SKILL Ripjaws+ Turbulence II Series 2000mhz 
Hard DriveOptical DriveMonitorKeyboard
2x Samsung f3 raid 0 None! T.V. Rosewill RK-9000 Mechanical 
PowerCaseMouse
ABS SL 1050W (Overkill) HAF X Deathadder 
  hide details  
Reply
post #20 of 42
Reallocated sectors are often a sign that something is physically wrong with the drive, not the port or controller it's connected to.

I RMA any new drive I have that comes with, or quickly develops, any reallocated sectors. If a drive develops reallocated sectors later, I move it to a secondary system. If the number climbs noticeably quickly, I get the drive replaced.
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Sandybridge Problem isn't that bad at all.