Overclock.net › Forums › Intel › Intel CPUs › 2600k - 95 C - 1.425 volt - Swiftecah Apogee XT Extreme
New Posts  All Forums:Forum Nav:

2600k - 95 C - 1.425 volt - Swiftecah Apogee XT Extreme

post #1 of 13
Thread Starter 
hello. i have a custom made water cooling system. my pump is 2000 lt per hour aquarium pump. my liquid is 100% car antifreeze . it was working awesome with my Q6600. now my temps are really high.

i have asus p8p67 pro asus motherboard. i gave vcore 1.425 volt and 48 multipler so @ 4.8 GHZ

at prime 95 after 20 minutes temps hits almost 95 C

i belive there is something wrong with my water block

i am using water block below with lga 1156 back plate

http://www.frozencpu.com/products/97...ZIGH&mv_pc=254


do you think that the cause is my water block




when i was using Q6600 with 1.54 volt @ 3.6 GHz i wasn't hitting even 70 C


please suggest me solutions

is my water block cause

should i replace with another one ?

thank you
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
post #2 of 13
Do you have thermal paste on the block? If so, what kind?
Corsair Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
FX-8320 ASUS M5A97 R2.0 EVGA GTX970 SSC 2x4gb Corsair Vengence DDR3 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 1TB 7200.14 DVD-RW Combo Corsair Hyper 212 EVO Windows 7 Home Premium 64-bit 
MonitorKeyboardPowerCase
Dell E228WFP Dell PS/2 EVGA 650BQ  Corsair 100R 
MouseMouse PadAudio
Logitech MX518/SteelSeries IKARI OCZ BEHEMOTH AudioTechnica ATH-AD700 
  hide details  
Reply
Corsair Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
FX-8320 ASUS M5A97 R2.0 EVGA GTX970 SSC 2x4gb Corsair Vengence DDR3 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 1TB 7200.14 DVD-RW Combo Corsair Hyper 212 EVO Windows 7 Home Premium 64-bit 
MonitorKeyboardPowerCase
Dell E228WFP Dell PS/2 EVGA 650BQ  Corsair 100R 
MouseMouse PadAudio
Logitech MX518/SteelSeries IKARI OCZ BEHEMOTH AudioTechnica ATH-AD700 
  hide details  
Reply
post #3 of 13
i would use distilled water with pt nuke. but check your system for air by gently rocking it back and forth while the pump is running. for example at idle im @ 40 degrees. at full load on prime 8hrs im at 64 degrees. (i have the same wblock)
Edited by Not A Good Idea - 2/5/11 at 5:09pm
post #4 of 13
I think that straight antifreeze would be to viscous for a loop. I've tried a 1:10 ratio with antifreeze before, but haven't used anything other than distilled for a while.

As for temps, they seem high, but I have no clue how hot those chips get under load. I've never monitored temps under load on my 2600k and I've never tried to do stress testing.
Daily
(15 items)
 
  
CPUMotherboardGraphicsRAM
5960x Asus X99A II Asus GTX 1060 Dual Team Vulcan (4 x 8GB) DDR4 3000 
Hard DriveOptical DriveCoolingOS
Samsung 960 evo LG Bluray  Thermaltake Water 3.0 Ultimate Windows 7 64 
MonitorKeyboardPowerCase
Dell U3415W OCN Ducky  Seasonic X750 Corsair Carbide 600Q 
MouseMouse PadAudio
Razer DeathAdder Black Edition Glorious  Creative Sound Blaster Z 
  hide details  
Reply
Daily
(15 items)
 
  
CPUMotherboardGraphicsRAM
5960x Asus X99A II Asus GTX 1060 Dual Team Vulcan (4 x 8GB) DDR4 3000 
Hard DriveOptical DriveCoolingOS
Samsung 960 evo LG Bluray  Thermaltake Water 3.0 Ultimate Windows 7 64 
MonitorKeyboardPowerCase
Dell U3415W OCN Ducky  Seasonic X750 Corsair Carbide 600Q 
MouseMouse PadAudio
Razer DeathAdder Black Edition Glorious  Creative Sound Blaster Z 
  hide details  
Reply
post #5 of 13
I don't WC

So I'm looking at this from an aircoolers brain.

Gotta be either the pump or a very bad seat.
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
post #6 of 13
Thread Starter 
Quote:
Originally Posted by Not A Good Idea View Post
i would use distilled water with pt nuke. but check your system for air by gently rocking it back and forth while the pump is running. for example at idle im @ 40 degrees. at full load on prime 8hrs im at 64 degrees. (i have the same wblock)
i am also 40 C at idle

but it goes 90 95 at load

you are also using 1156 back plate right ?

and how much voltage did you give at what speed
Edited by PokemonCraft - 2/5/11 at 5:21pm
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
post #7 of 13
Thread Starter 
Quote:
Originally Posted by boom50cal View Post
Do you have thermal paste on the block? If so, what kind?
of course i have

artic silver 5
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600K ASus P8P67 Pro Zotac GTX 470 AMP 16 GB DDR3 
Hard DriveOptical DriveOSMonitor
3 X Raid 0 OCZ SSD Dvd Writer Windows 7 Ultimate Sp1 SyncMaster BX2450 
KeyboardPowerCaseMouse
Logitech 750 Watt Silverstone Open Case X7 
Mouse Pad
None 
  hide details  
Reply
post #8 of 13
Quote:
Originally Posted by PokemonCraft View Post
i am also 40 C at idle

but it goes 90 95 at load

you are also using 1156 back plate right ?

and how much voltage did you give at what speed
yes 1156 backplate (its the same spec) im runng 5050Mhz at 1.37v
post #9 of 13
what are your load vcore? that board has levels of LLC what type of vdroop, if its at its highest setting that could cause vcore to increase underload. I had temperatures problems with my waterloop at 1.53+ v with load line calibration level2 on my board increases vcore underload instead of decreasing.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #10 of 13
I would drain the anti-freeze out of the loop and fill the loop with distilled water + 10-20% anti-freeze + PT Nuke/Biocide. It is not recommended to use 100% anti-freeze because of the viscosity and it increases your overall thermal temps because it cannot dissipate heat as well as distilled water.

At 1.425V 4.8Ghz 100% load I don't even get anywhere close to 95C and I'm using an older Apogee GTX which is basically an older version of Apogee GTZ and Apogee XT. But as for the aquarium pump I have no idea, I'm using MCP-655B in my loop.

But the only thing I can think of is it's either the pump or the 100% anti-freeze. But I'm going to say the anti-freeze.
Skylake Is Here!
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Batch #L535B021 4.7Ghz @ 1.296V GIGABYTE G1 Gaming GA-Z170X-Gaming 7 EVGA Geforce GTX 970 SSC ACX 2.0+ G.SKILL TridentZ 16GB DDR4 3000 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro M.2 512GB  Crucial BX100 250 GB SanDisk SSDPlus 240 GB NZXT Kraken X61  
OSMonitorKeyboardPower
Windows 8.1 & 10 Dell UltraSharp 2913WM 21:9 2560x1080 Ducky Shine 4, CODE WASD, Deck Legend, G710+ EVGA SuperNova G2 850W 
CaseMouseMouse PadAudio
Phanteks Enthoo Evolv ATX Mid-Tower Ducky Secret SteelSeries Fostex Purple Heart TH-X00 
Audio
AKG K553 Pro, Philips SHP9500, Superlux 668B, S... 
  hide details  
Reply
Skylake Is Here!
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Batch #L535B021 4.7Ghz @ 1.296V GIGABYTE G1 Gaming GA-Z170X-Gaming 7 EVGA Geforce GTX 970 SSC ACX 2.0+ G.SKILL TridentZ 16GB DDR4 3000 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro M.2 512GB  Crucial BX100 250 GB SanDisk SSDPlus 240 GB NZXT Kraken X61  
OSMonitorKeyboardPower
Windows 8.1 & 10 Dell UltraSharp 2913WM 21:9 2560x1080 Ducky Shine 4, CODE WASD, Deck Legend, G710+ EVGA SuperNova G2 850W 
CaseMouseMouse PadAudio
Phanteks Enthoo Evolv ATX Mid-Tower Ducky Secret SteelSeries Fostex Purple Heart TH-X00 
Audio
AKG K553 Pro, Philips SHP9500, Superlux 668B, S... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 2600k - 95 C - 1.425 volt - Swiftecah Apogee XT Extreme