Overclock.net › Forums › AMD › AMD CPUs › High water cooling temps
New Posts  All Forums:Forum Nav:

High water cooling temps

Poll Results: Do you think my temps are high?

 
  • 20% (4)
    Yes
  • 80% (16)
    No
20 Total Votes  
post #1 of 53
Thread Starter 
I installed my Rasa RS240 kit this weekend and I've been stress testing and my temps seem really high. I'm only running at 3.89GHz with 1.4375V.


My setup is res -> rad -> block -> res with 2 GT's in pull (pull gave me 1 C lower temps than push).

Also, I've never water cooled before, but are the tubes coming off the rad supposed to be cold? Because mine feel the same entering the CPU block and leaving the CPU block.

Edit: Poll added
Edited by razr m3 - 2/6/11 at 11:43am
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
post #2 of 53
50c @ 1.4+v looks good to me?
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #3 of 53
Whats your ambient? Have you tried to reseat the block? get a push/pull set-up? Hows your airflow?

by the way 50c isn't that high but you should be getting lower temps seeing as I can get 49c with 1.42v 4GHz.
Main Rig
(15 items)
 
Linux PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
i5 2500k 4.3 GHz @1.28v Gigabyte GA-Z68X-UD3P Intel Z68 (REV B3) 2x Sapphire HD 6870 16GB Mushkin Blackline 1600MHz 
Hard DriveHard DriveHard DriveOptical Drive
1x Mushkin Chronos 120gb 2x Samsung F3 1TB  1x Segate 500gb Samsung SH-S223C 
OSMonitorPowerCase
W7 Home Premium 64 bit BenQ 22"  Corsair TX750 NZXT Phantom White V2 
CPUMotherboardGraphicsRAM
Phenom II 955 4.0GHz Asrock extreme3 880g Onboard 4gb Corsair XM3 1600MHz 
Hard DriveOSMonitor
Segate 500gb Ubuntu 18" CTX 
  hide details  
Reply
Main Rig
(15 items)
 
Linux PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
i5 2500k 4.3 GHz @1.28v Gigabyte GA-Z68X-UD3P Intel Z68 (REV B3) 2x Sapphire HD 6870 16GB Mushkin Blackline 1600MHz 
Hard DriveHard DriveHard DriveOptical Drive
1x Mushkin Chronos 120gb 2x Samsung F3 1TB  1x Segate 500gb Samsung SH-S223C 
OSMonitorPowerCase
W7 Home Premium 64 bit BenQ 22"  Corsair TX750 NZXT Phantom White V2 
CPUMotherboardGraphicsRAM
Phenom II 955 4.0GHz Asrock extreme3 880g Onboard 4gb Corsair XM3 1600MHz 
Hard DriveOSMonitor
Segate 500gb Ubuntu 18" CTX 
  hide details  
Reply
post #4 of 53
The coolant does not gain or lose that much heat. Remember that water has 4X the heat capacity of air. That is it takes 4X the heat to raise the same volume water as the same volume of air the same temp.

That being said, your temps seem a bit high.
DD Boxen
(23 items)
 
   
CPUMotherboardGraphicsRAM
Intel Xeon E3-1230 Asus Maximus IV Gene-Z/Gen3 Powercolor 6970 2GB G. Skill 1600mHz Ripjaws 
Hard DriveOptical DriveCoolingCooling
SpinpontF3 1TB, WD 250, and WD320 Lite-On DT Waterblocks DT5Noz Waterblock Swiftech Komodo 6900-1 Waterblock 
CoolingCoolingCoolingOS
Swiftech MCR-220 Drive radiator Swiftech MCR-220 QP radiator 6xGentle Typhoon AP-15s Archx64 KDE4.5, Windows 7 x64 
MonitorKeyboardPowerCase
Eyefinity 3-head 5265x1050 OCN Ducky!! MX Blue Switches XFX 750W Black Edition Mountain Mods H2gO 
MouseAudioAudioAudio
Razer Naga Asus Xonar Essence STX Sennheiser 595 Sony STR-DE995 A/V receiver 
OtherOther
Lian Li Card flash memory reader Asus PCE-N15 Wifi-N card 
CPUMotherboardGraphicsRAM
AMD 1055T Gigabyte 790 Sapphire 4850x2 2x2GB 1600mHz 
Hard DriveOptical DriveOSKeyboard
A few Yes Vista/7 Das Keyboard 
Power
Ugly 
CPUMotherboardGraphicsRAM
Qualcomm Snapdragon APQ8060 1.2 GHz Something kinda small Qualcomm Adreno core 16GB 
Hard DriveOptical DriveOSMonitor
None N/A WebOS 3.0.2 9.7" XGA, multitouch 
PowerCase
6300mAh Piano Black 
  hide details  
Reply
DD Boxen
(23 items)
 
   
CPUMotherboardGraphicsRAM
Intel Xeon E3-1230 Asus Maximus IV Gene-Z/Gen3 Powercolor 6970 2GB G. Skill 1600mHz Ripjaws 
Hard DriveOptical DriveCoolingCooling
SpinpontF3 1TB, WD 250, and WD320 Lite-On DT Waterblocks DT5Noz Waterblock Swiftech Komodo 6900-1 Waterblock 
CoolingCoolingCoolingOS
Swiftech MCR-220 Drive radiator Swiftech MCR-220 QP radiator 6xGentle Typhoon AP-15s Archx64 KDE4.5, Windows 7 x64 
MonitorKeyboardPowerCase
Eyefinity 3-head 5265x1050 OCN Ducky!! MX Blue Switches XFX 750W Black Edition Mountain Mods H2gO 
MouseAudioAudioAudio
Razer Naga Asus Xonar Essence STX Sennheiser 595 Sony STR-DE995 A/V receiver 
OtherOther
Lian Li Card flash memory reader Asus PCE-N15 Wifi-N card 
CPUMotherboardGraphicsRAM
AMD 1055T Gigabyte 790 Sapphire 4850x2 2x2GB 1600mHz 
Hard DriveOptical DriveOSKeyboard
A few Yes Vista/7 Das Keyboard 
Power
Ugly 
CPUMotherboardGraphicsRAM
Qualcomm Snapdragon APQ8060 1.2 GHz Something kinda small Qualcomm Adreno core 16GB 
Hard DriveOptical DriveOSMonitor
None N/A WebOS 3.0.2 9.7" XGA, multitouch 
PowerCase
6300mAh Piano Black 
  hide details  
Reply
post #5 of 53
Thread Starter 
Quote:
Originally Posted by tsm106 View Post
50c @ 1.4+v looks good to me?
Really? People have been telling me it's kinda high.

Quote:
Originally Posted by Juganot View Post
Whats your ambient? Have you tried to reseat the block? get a push/pull set-up? Hows your airflow?

by the way 50c isn't that high but you should be getting lower temps seeing as I can get 49c with 1.42v 4GHz.
Ambients are around 73 F, don't know the C conversion. I'm going to reseat if temps don't get better. Air flows good. I've got a 200mm front fan (intake), 2 120mm Cooler Master fans on the door, the 2 GT's in pull, and a 120mm rear exhaust. Also, I think the PSU is exhaust as well.

You get better temps with air cooling...

Also, it might be worth mentioning I've only got ~50 hours of curing done on the AS5.

Quote:
Originally Posted by Skripka View Post
The coolant does not gain or lose that much heat. Remember that water has 4X the heat capacity of air. That is it takes 4X the heat to raise the same volume water as the same volume of air the same temp.

That being said, your temps seem a bit high.
I'm just running just plain distilled water and used a pea sized dot of AS5 (~150 hrs of curing left). I thought the temps seemed a little high too. With my old cooler (Vigor Monsoon III LT) I got 56 C load.



On an unrelated note, my friend and I are having a debate. Do water cooling pumps push or pull the water?
Edited by razr m3 - 2/6/11 at 9:52am
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
post #6 of 53
That's high for water with a 240 rad ...
You made sure that ALL the air is out of your loop right ? I mean tilt your case etc, turn the pump on/off a few times, because i think that there's still some air in your rad.

I get 52°C with my cpu at 3.9Ghz 1.45V (with AS5 only cured for 30h) so something is definitly wrong there.
Sane
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K @ 4.9Ghz 1.46V ASUS Rampage IV Formula ASUS GTX780 1176Mhz 1.187V 16GB GeIL Enhance Corsa 1600Mhz CL9 
Hard DriveCoolingCoolingCooling
Samsung 256GB 830 EK Supremacy Nickel-Plexi XSPC RS360 XSPC RX240 
CoolingOSMonitorKeyboard
5x Scythe Gentle Typhoon AP-15 Windows 8 Pro x64 Asus VE228T Logitech G19s 
PowerCaseMouse
Corsair HX850 NZXT Phantom 630 Razor Abyssus 
  hide details  
Reply
Sane
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K @ 4.9Ghz 1.46V ASUS Rampage IV Formula ASUS GTX780 1176Mhz 1.187V 16GB GeIL Enhance Corsa 1600Mhz CL9 
Hard DriveCoolingCoolingCooling
Samsung 256GB 830 EK Supremacy Nickel-Plexi XSPC RS360 XSPC RX240 
CoolingOSMonitorKeyboard
5x Scythe Gentle Typhoon AP-15 Windows 8 Pro x64 Asus VE228T Logitech G19s 
PowerCaseMouse
Corsair HX850 NZXT Phantom 630 Razor Abyssus 
  hide details  
Reply
post #7 of 53
Noticed you have hot water going into your res/pump,not the best config imo.
RAD>PUMP>CPU>GPU would be better.

Never had AMD but your temps dont seem bad from what i have seen others on here.
Le Box of Black
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 Gigabyte X58A-UD7 r2.0 GTX 770 16GB Corsair Vengeance in Triple channel mode ;) 
Hard DriveHard DriveHard DriveHard Drive
Ocz Vertex 2  Samsung F1  Samsung F3 Samsung F1 
Optical DriveOSMonitorKeyboard
Sammie Dvd rw Windows 7 64Bit HZ281HPB 1200p / HP IPS 1080p / Samsung Syncmas... Qpad MK80 (Blue switch), SteelSeries 7G (Cherry... 
PowerCaseMouseMouse Pad
HX1000 CM-Stacker 832 Flipped Naos 3200,G5,G400,G400s, G300, Kone+ Razor Destructor and Steelseries Qck 
AudioAudioAudio
X-Fi Fatal1ty  ATH-T500 / AH-D510 Samson CO1U PAK Condenser Mic  
  hide details  
Reply
Le Box of Black
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 Gigabyte X58A-UD7 r2.0 GTX 770 16GB Corsair Vengeance in Triple channel mode ;) 
Hard DriveHard DriveHard DriveHard Drive
Ocz Vertex 2  Samsung F1  Samsung F3 Samsung F1 
Optical DriveOSMonitorKeyboard
Sammie Dvd rw Windows 7 64Bit HZ281HPB 1200p / HP IPS 1080p / Samsung Syncmas... Qpad MK80 (Blue switch), SteelSeries 7G (Cherry... 
PowerCaseMouseMouse Pad
HX1000 CM-Stacker 832 Flipped Naos 3200,G5,G400,G400s, G300, Kone+ Razor Destructor and Steelseries Qck 
AudioAudioAudio
X-Fi Fatal1ty  ATH-T500 / AH-D510 Samson CO1U PAK Condenser Mic  
  hide details  
Reply
post #8 of 53
Quote:
Originally Posted by razr m3 View Post
Really? People have been telling me it's kinda high.



Ambients are around 73 F, don't know the C conversion. I'm going to reseat if temps don't get better. Air flows good. I've got a 200mm front fan (intake), 2 120mm Cooler Master fans on the door, the 2 GT's in pull, and a 120mm rear exhaust. Also, I think the PSU is exhaust as well.

You get better temps with air cooling...

Also, it might be worth mentioning I've only got ~50 hours of curing done on the AS5.


I'm just running just plain distilled water and used a pea sized dot of AS5 (~150 hrs of curing left). I thought the temps seemed a little high too. With my old cooler (Vigor Monsoon III LT) I got 56 C load.



On an unrelated note, my friend and I are having a debate. Do water cooling pumps push or pull the water?
My 1055 at 4ghz 1.45v hit 65c with a H50, that's hot. 50c@1.4v load is not bad.

Switch to shin etsu or Mx3 or whatever hi-perf tim that's not conductive, which AS5 is, besides it being really behind the curve now.

Fans: under 1500rpm = pull, over 1500rpm = push or both. Also, your res is before you pump right?
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #9 of 53
Ehm that's basicly what he has ...
Quote:
res -> rad -> block -> res
So RES>PUMP>RAD>CPU>RES, pump before the rad should be better then what you suggested.


Quote:
Originally Posted by tsm106 View Post
My 1055 at 4ghz 1.45v hit 65c with a H50, that's hot. 50c@1.4v load is not bad.

Switch to shin etsu or Mx3 or whatever hi-perf tim that's not conductive, which AS5 is, besides it being really behind the curve now.

Fans: under 1500rpm = pull, over 1500rpm = push or both. Also, your res is before you pump right?
AS5 is above MX-3, some user here tested both and made a thread about it but i can't find it now.

Found it, http://www.overclock.net/other-cooli...l#post10568130
Edited by nicksasa - 2/6/11 at 10:13am
Sane
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K @ 4.9Ghz 1.46V ASUS Rampage IV Formula ASUS GTX780 1176Mhz 1.187V 16GB GeIL Enhance Corsa 1600Mhz CL9 
Hard DriveCoolingCoolingCooling
Samsung 256GB 830 EK Supremacy Nickel-Plexi XSPC RS360 XSPC RX240 
CoolingOSMonitorKeyboard
5x Scythe Gentle Typhoon AP-15 Windows 8 Pro x64 Asus VE228T Logitech G19s 
PowerCaseMouse
Corsair HX850 NZXT Phantom 630 Razor Abyssus 
  hide details  
Reply
Sane
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K @ 4.9Ghz 1.46V ASUS Rampage IV Formula ASUS GTX780 1176Mhz 1.187V 16GB GeIL Enhance Corsa 1600Mhz CL9 
Hard DriveCoolingCoolingCooling
Samsung 256GB 830 EK Supremacy Nickel-Plexi XSPC RS360 XSPC RX240 
CoolingOSMonitorKeyboard
5x Scythe Gentle Typhoon AP-15 Windows 8 Pro x64 Asus VE228T Logitech G19s 
PowerCaseMouse
Corsair HX850 NZXT Phantom 630 Razor Abyssus 
  hide details  
Reply
post #10 of 53
Thread Starter 
Quote:
Originally Posted by nicksasa View Post
That's high for water with a 240 rad ...
You made sure that ALL the air is out of your loop right ? I mean tilt your case etc, turn the pump on/off a few times, because i think that there's still some air in your rad.

I get 52°C with my cpu at 3.9Ghz 1.45V (with AS5 only cured for 30h) so something is definitly wrong there.
I've gotten a lot of the air out, but not all. I'll be continually shaking the case to get out excess air.

Quote:
Originally Posted by tsm106 View Post
My 1055 at 4ghz 1.45v hit 65c with a H50, that's hot. 50c@1.4v load is not bad.

Switch to shin etsu or Mx3 or whatever hi-perf tim that's not conductive, which AS5 is, besides it being really behind the curve now.

Fans: under 1500rpm = pull, over 1500rpm = push or both. Also, your res is before you pump right?
AS5 is better than MX3. Also, I've got a fan controller so I try to keep the RPMs around 1350-1500.

Quote:
Originally Posted by nicksasa View Post
Ehm that's basicly what he has ...

So RES>PUMP>RAD>CPU>RES, pump before the rad should be better then what you suggested.




AS5 is above MX-3, some user here tested both and made a thread about it but i can't find it now.

Found it, http://www.overclock.net/other-cooli...l#post10568130
Alright, I figured it'd be best for the cold rad water to go straight into the block.
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › High water cooling temps