I would suggest going over to jab-tech and getting some high speed yates if you have a fan controller. You can get 4 of them for 20 bucks.
Also... I bought some biocide, and ran it in my loop during a out of case leak test. I also recommend using a hot water / 90% alcohol mixture to clean out the rad/block/tubing before assembling it for the first time.
And last but not least, the tubing that comes with the kit is pretty meh... I would suggesting getting a few feet of primochill 7/16" tubing of whatever color you desire =D
Cool, I am thinking about getting Feser - UV Red ( Like the idea behind non-conductive liquid in case of leaks ). Is it worth the $20? Or can I pick that up from somewhere cheaper than frozenCPU? Also do I need a corrosion blocker?
The only Feser product I like is that pure water they make, but it is crazy expensive and distilled water does just as good in terms of heat extraction.
I would suggest sticking with some distilled water and a kill coil... if your nuts a drop or two of biocide since your going going to need about a liter or so to fill that 360 loop.
You can get the colored UV if you want, but it may dye your tubing and leave gunk on your cpu block. Its ALOT easier to just get Red clear tubing and run distilled water.Edited by rmp459 - 2/7/11 at 9:42am