Overclock.net › Forums › Intel › Intel CPUs › 980X + P6T = Fail?
New Posts  All Forums:Forum Nav:

980X + P6T = Fail?

post #1 of 21
Thread Starter 
Eh guys.

I've gotten quite cozy with the P6T and P6TV2- as you can see... I've had no trouble with the P6TV2 and the 980X but I will say I've been having some major BSOD trouble with the P6T and the 980X combo.

Mostly 124s... which I know are QPI related and indicates that it needs to be adjusted either up or down.

The thing is, I'm strictly multiplier OC'ing- and currently set at 31x133- which is the same settings as my other one (980X + P6TV2.)

My P6TV2 is set on auto because I figured the multiplier wasn't going to be affecting or increasing QPI / DRAM. My RAM isn't overclocked or overvolted either- it's stock. That combination hasn't crashed in over a month of folding.

So I've walked down the 1.20s in QPI with my other rig, two stepping with each BSOD. I'm currently at 1.3 and I think maybe we're getting closer.

I wonder if "auto" on the P6T just doesn't have the grapes to keep up with the needs of that processor? Anyone else with the P6T / 980X combo have any similar experience with the 124s?

Thanks.
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
post #2 of 21
Try 1.325V for QPI/VTT.
     
CPUMotherboardGraphicsRAM
i7 980X 3003B475* @ 4449.1MHz 1.45V (6C-12T) ASUS Rampage III Extreme - 1208 BIOS CrossFire Asus EAH6970 945MHz/1450MHz 1180 mV* 6GB Corsair Dominator GT 2009MHz / 7-8-7-20 T1 C7* 
Hard DriveOSMonitorKeyboard
RAID 0* OCZ Vertex 3 120GBX2 (OS)+ 4X 2TB WD Green Windows 7 Ultimate 64Bit 30" NEC MultiSync PA301W Filco Majestouch-2 Cherry MX Red 
PowerCaseMouseMouse Pad
Corsair AX1200 1200W 80 Plus Gold 100% Modular Corsair Obsidian 800D Razor Mamba 4G Steelseries SX 
Audio
Bowers & Wilkins PM1 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-2620M Apple Intel® HD Graphics 3000 Corsair Memory 8GB DDR3 1333MHz 
Hard DriveOptical DriveOS
Western Digital Scorpio Blue (WD10JPVT) 1TB SuperDrive OSX Lion 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7 980X 3003B475* @ 4449.1MHz 1.45V (6C-12T) ASUS Rampage III Extreme - 1208 BIOS CrossFire Asus EAH6970 945MHz/1450MHz 1180 mV* 6GB Corsair Dominator GT 2009MHz / 7-8-7-20 T1 C7* 
Hard DriveOSMonitorKeyboard
RAID 0* OCZ Vertex 3 120GBX2 (OS)+ 4X 2TB WD Green Windows 7 Ultimate 64Bit 30" NEC MultiSync PA301W Filco Majestouch-2 Cherry MX Red 
PowerCaseMouseMouse Pad
Corsair AX1200 1200W 80 Plus Gold 100% Modular Corsair Obsidian 800D Razor Mamba 4G Steelseries SX 
Audio
Bowers & Wilkins PM1 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-2620M Apple Intel® HD Graphics 3000 Corsair Memory 8GB DDR3 1333MHz 
Hard DriveOptical DriveOS
Western Digital Scorpio Blue (WD10JPVT) 1TB SuperDrive OSX Lion 
  hide details  
Reply
post #3 of 21
I dunno, I don't use auto on the qpi voltage or run stock bclk. M
For reference my p6t/980x takes about 1.39V to run 18GB of 1600 rated mem at 1754 8-8-8-20 2N. On my other 980x with the p6td deluxe v2 I was able to get 1954 with about 1.38 I think.
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
post #4 of 21
auto will set it to like 1.475 even with no overclocks, i set mine to 1.325, using a 930 @4ghz though.
Pen Fifteen
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7930 @ 4.0ghz @ 1.22v 24/7 Asus P6T Deluxe V2 Sapphire Radeon HD5870 OCZ 
Hard DriveOptical DriveCoolingOS
OCZ Vertex2 120gb SSD / 2x1tb Samsung SP F3 Pioneer DVR 218L Custom Loop Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung 23inch LED x3 Eyefinity Logitech G15 Refresh Corsair HX1050 Corsair 800D 
MouseMouse PadAudio
Logitech G700 Razor Goliathus Edifier S550 
  hide details  
Reply
Pen Fifteen
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7930 @ 4.0ghz @ 1.22v 24/7 Asus P6T Deluxe V2 Sapphire Radeon HD5870 OCZ 
Hard DriveOptical DriveCoolingOS
OCZ Vertex2 120gb SSD / 2x1tb Samsung SP F3 Pioneer DVR 218L Custom Loop Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung 23inch LED x3 Eyefinity Logitech G15 Refresh Corsair HX1050 Corsair 800D 
MouseMouse PadAudio
Logitech G700 Razor Goliathus Edifier S550 
  hide details  
Reply
post #5 of 21
Thread Starter 
That's my next step Dork... I haven't heard it crash around the corner yet so maybe we're getting somewhere.

Stren, are you still talking QPI / Dram voltages there?

I haven't been overclocking RAM yet because I don't really need to for what these machines primarily do- which is folding. But it's good to have a reference. +1 rep for you guys.
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
post #6 of 21
Thread Starter 
Well 1.325 crashed pretty quickly. So too did the steps before and after. Is my chip just Qpi hungry? 1.35 was my old standard- at what point does 124 mean something other than Qpi voltage? What is my ceiling for vtt? This is the second proc that has been suffering Qpi. What are the odds the mobo crapped out?
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
post #7 of 21
An 0x124 BSOD can just as well be a core voltage problem as a QPI voltage problem. Don't assume you just need to up the QPI.
Quote:
BSOD Codes for i7

0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0X109 = Not enough or too Much memory voltage
The Oracle
(16 items)
 
Pythia
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte GA-Z97X-GAMING 5 Gigabyte GeForce GTX 780Ti WindForce 3x OC Corsair Vengeance 2x8GB DDR3 1866MHz  
Hard DriveHard DriveHard DriveCooling
Samsung 256GB 850 Pro Samsung 256GB 840 Pro Westerb Digital Caviar Black 1TB XSPC Rasa ES240 + 2 GT AP-15s 
OSMonitorKeyboardPower
Windows 8.1 Pro Samsung SyncMaster S27A850D 27" LCD Corsair K70 Corsair AX850 
Case
Corsair 650D 
CPUMotherboardRAMHard Drive
i3 4130 Gigabyte GA-B85M-HD3 Corsair 2x4gb DDR3 1600mhz Low Profile CL9 1.35v WD Blue 500GB (OS) 
Hard DriveOSMonitorPower
WD Green 4TB, 2TB Ubuntu x86_64 14.04.1 LTS ssh or vnc SuperFlower Golden Green HX 350W 
Case
Corsair 350D, GT AP-13 
  hide details  
Reply
The Oracle
(16 items)
 
Pythia
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte GA-Z97X-GAMING 5 Gigabyte GeForce GTX 780Ti WindForce 3x OC Corsair Vengeance 2x8GB DDR3 1866MHz  
Hard DriveHard DriveHard DriveCooling
Samsung 256GB 850 Pro Samsung 256GB 840 Pro Westerb Digital Caviar Black 1TB XSPC Rasa ES240 + 2 GT AP-15s 
OSMonitorKeyboardPower
Windows 8.1 Pro Samsung SyncMaster S27A850D 27" LCD Corsair K70 Corsair AX850 
Case
Corsair 650D 
CPUMotherboardRAMHard Drive
i3 4130 Gigabyte GA-B85M-HD3 Corsair 2x4gb DDR3 1600mhz Low Profile CL9 1.35v WD Blue 500GB (OS) 
Hard DriveOSMonitorPower
WD Green 4TB, 2TB Ubuntu x86_64 14.04.1 LTS ssh or vnc SuperFlower Golden Green HX 350W 
Case
Corsair 350D, GT AP-13 
  hide details  
Reply
post #8 of 21
Post up a pic of your BIOS settings so we can have a look.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 980X 4.8GHz @1.44V Gigabyte X58A UD5 rev 2.0 GTX580 Lightning 3x2GB Dominator GTs C8 
Hard DriveOSMonitorKeyboard
C300 256GB SSD + WD750 Caviar Black Windows 7 64bit Home Premium DELL U2410 Razer Tarantula 
PowerCaseMouse
Corsair Gold AX1200 Lian Li Habu 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 980X 4.8GHz @1.44V Gigabyte X58A UD5 rev 2.0 GTX580 Lightning 3x2GB Dominator GTs C8 
Hard DriveOSMonitorKeyboard
C300 256GB SSD + WD750 Caviar Black Windows 7 64bit Home Premium DELL U2410 Razer Tarantula 
PowerCaseMouse
Corsair Gold AX1200 Lian Li Habu 
  hide details  
Reply
post #9 of 21
Thread Starter 
I'm up to 1.3625 on qpi/dram now- keeping on my two step routine. I'll grab some photos during my next fail lol.

I've always gone by the same list posted above- when I get a 101 error, then I bump up vcore... 124 I know it needs either up or down. What I'd need someone to explain is the connection between low vcore and 124. If vcore is too low, how does it affect qpi / dram- and in such a way that it wouldn't come out as a 101. Still learning lots. Thanks again guys. Like I said- I'll post photos soonest.
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
DireWolf
(13 items)
 
  
CPUMotherboardGraphicsRAM
980X Asus P6T Deluxe V2 GTX 460 6G Patriot 
Hard DriveOptical DriveOSMonitor
80GB Intel X-25; 1.5TB WD LG DVD Windows 7 Ultimate 64 24T Syncmaster 
PowerCaseMouse
850W Corsair HAF X G500 
  hide details  
Reply
post #10 of 21
sounds like your having the same problems I was........
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 980x 4.5@1.38 Rampage III Extreme EVGA GTX660ti Corsair XMS3 16GB PC1600 
Hard DriveOptical DriveOSMonitor
Samsung EVO SSD LG BD-RW 7 Ultimate 64bit Samsung T240 
PowerCase
Corsair HX1000 800D 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 980x 4.5@1.38 Rampage III Extreme EVGA GTX660ti Corsair XMS3 16GB PC1600 
Hard DriveOptical DriveOSMonitor
Samsung EVO SSD LG BD-RW 7 Ultimate 64bit Samsung T240 
PowerCase
Corsair HX1000 800D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 980X + P6T = Fail?