Originally Posted by Liighthead
but what do u put around the cpu socket?
then add lots of towels on and around components..like so:
* I used a PA120.3 in a acetone bath, with DICE..as well as re-enforced tubing [necessary to prevent kinks once the tubing is insulated] and acetone in-loop. It is important to have an open/vented res for chillers like this, as the fluid will rapidly expand and contract once it swings from ambient-> -0 and then back to ambient once you finished and warmed up. I was able to hold a Q6600 in the low -40c range under load at 4.5ghz and a E8400 in the high -50c range at 5.4ghz
..the chillers really shine for GPU's though.