So I solved my earlier issue. Apparently the GPU Bridge and blocks were installed completely fine but the fittings were incorrectly placed. One was on the top right side while the other was on the actual side. The water flowed through the first one and was directly being pushed out the side, allowing little to no water into the waterblocks. This issue was solved here: http://www.overclock.net/water-cooli...tercooled.html
You can see the solution on pages 3-6. Thanks for all who participated in helping and stood by me when I couldn't get more mad haha.
Anyways, look what came today! That's right, I'm never done! Muahahaha. Now I can work on some REAL cable management other than electrical tape and stuffing the wires wherever I can! More pictures by Monday hopefully. Not quite sure when I'll have time, especially since the nuts for the screws vanished.
Just for you, Jim
I wish I could trade my 980x for the newly released 990x but whatever! Haha.
Thanks for viewing all! Let me know if you have any questions or suggestions. I'm open to anything!