Decided to try and do as much homework as I could and diagnose my SSD problem incase it was not bad ports on my board. Besides I want to learn and what better way to do so other than troubleshooting headaches! lol
Here was my first plan of attack:
(scroll down to read the second post by owcraftsman)
It does work to load my drive in the list but will not let me load windows still my errors are:
* Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for the installion. Error code: 0x80070057*
So moving forward after looking up the error code this was my second plan of attack!
(scroll down to read the first post by Theacen)
I used all steps but except for writing disk with 0's
After finishing that I recieved this error when trying to install windows again but this error had no codes it just said:
*Setup was unable to create a system partition*
Back to the drawing board and found this.
(Read the post by Undertow)
After putting it all together in that order I finish up with:
*Windows cannot be installed to this disk. This computer's Hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu*
Everything is enabled in bios. I am going to keep playing with it because I came to far to turn back now unless I know I have tried every single damn thing I can to fire this damn thing up in SATAIII lol. Hope some of the info posted above can help people with similar problems.
Thank you to the poster's mentioned above!Edited by jamesschmidt82 - 2/14/11 at 3:08pm