Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 1454

post #14531 of 22188


What I used on top of my Reservoirs due to the limited space.

TCO

Needs an 18mm fitting (For tubing) to be flush with surface
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Impact VIII GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 GS Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Impact VIII GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 GS Caselabs S3 
  hide details  
Reply
post #14532 of 22188
Quote:
Originally Posted by rioja View Post

Is it possible to fit 90 degree adapter or pass through in this 21 mm? Or they all much taller?

Even this
Bitspower Matte Black Rotary 90-Degree IG1/4 Extender - BP-MB90R
has 26.6 mm itself, not speaking about adding adapter (pass through) to it.
Warning: Spoiler! (Click to show)



]

No, not possible. You can check chessboard log I have been there. Not even with the small non rotary bitspower 90.

Here:

http://www.overclock.net/t/1521734/chessboard-sma8-build/50#post_23104531
Edited by Gabrielzm - 7/23/15 at 3:31pm
post #14533 of 22188
Yes, tube itself should fit in this 21 mm.

Also maybe this option will work, when acrylic tube goes through grommet and bend right after mid plate.



But to have real pass through is almost impossible. I have found some slim version of pass thru - BP-WTP-C04



It has 12mm but no way to connect anything to it.

I think that thechnically it is possible to make such 90-degree pass-through slim adapter with 20mm height, but it seems no one does this redface.gif
post #14534 of 22188
Hm, if you don't use a passthrough fitting and get a tad creative with attaching the angle fitting to its
two counterpoints, that might just about fit, yeah. EDIT: Apparently it won't, nevermind.

EDIT: Yeah, I think making a direct bend in the tube after the hole is probably your best bet. And
indeed, such a slim passthrough angle would indeed be rather handy.

You could always make one yourself from Delrin/Acetal, should not be too difficult or expensive
if you're a bit adept with your hands.
Edited by alpenwasser - 7/23/15 at 3:41pm
ZEUS
(14 items)
 
HELIOS
(7 items)
 
 
CPUMotherboardRAMHard Drive
Intel i7 2600k MSI Z77A-GD65 Kingston HyperX Western Digital RE4 
Hard DriveCoolingCoolingCooling
Western Digital Red EKWB Supreme HF Alphacool NexXxos UT60 360 mm Corsair SP120 Quiet Edition 
CoolingOSMonitorKeyboard
Aquacomputer Aquastream Standard Arch Linux 64 Bit Dell 24" 1920x1200 Qpad Mk85 
PowerCase
BeQuiet 550W Fractal Design R4 
  hide details  
Reply
ZEUS
(14 items)
 
HELIOS
(7 items)
 
 
CPUMotherboardRAMHard Drive
Intel i7 2600k MSI Z77A-GD65 Kingston HyperX Western Digital RE4 
Hard DriveCoolingCoolingCooling
Western Digital Red EKWB Supreme HF Alphacool NexXxos UT60 360 mm Corsair SP120 Quiet Edition 
CoolingOSMonitorKeyboard
Aquacomputer Aquastream Standard Arch Linux 64 Bit Dell 24" 1920x1200 Qpad Mk85 
PowerCase
BeQuiet 550W Fractal Design R4 
  hide details  
Reply
post #14535 of 22188
Quote:
Originally Posted by TheCautiousOne View Post



What I used on top of my Reservoirs due to the limited space.

TCO

Needs an 18mm fitting (For tubing) to be flush with surface

Hey TCO, do you have a link to that fitting? I think it might be low enough profile for something I need.
RZA
(29 items)
 
GZA
(28 items)
 
Ol' Dirty Bastard
(32 items)
 
  hide details  
Reply
RZA
(29 items)
 
GZA
(28 items)
 
Ol' Dirty Bastard
(32 items)
 
  hide details  
Reply
post #14536 of 22188
Quote:
Originally Posted by Dagamus NM View Post

Hey TCO, do you have a link to that fitting? I think it might be low enough profile for something I need.

Take it

TCO

THey didn't have these when I was building. these
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Impact VIII GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 GS Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Impact VIII GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 GS Caselabs S3 
  hide details  
Reply
post #14537 of 22188
Quote:
Originally Posted by Dagamus NM View Post

Hey TCO, do you have a link to that fitting? I think it might be low enough profile for something I need.

http://www.performance-pcs.com/bitspower-g-1-4-90-degree-ig-1-4-adapter-matte-black.html
post #14538 of 22188
Quote:
Originally Posted by TheCautiousOne View Post



What I used on top of my Reservoirs due to the limited space.

TCO

Needs an 18mm fitting (For tubing) to be flush with surface

You know yes, this thing may work, at least if pass through used upside down

So this 18 mm part



Will screw into 3mm part here



Total height is exactly 21 mm biggrin.gif
post #14539 of 22188
Quote:
Originally Posted by rioja View Post

You know yes, this thing may work, at least if pass through used upside down

So this 18 mm part Warning: Spoiler! (Click to show)


Will screw into 3mm part here

Total height is exactly 21 mm biggrin.gif

Have you seen my previous post? Have you checked this:

http://www.overclock.net/t/1521734/chessboard-sma8-build/50#post_23104531

? It will be extremely tight and might not fit at all. I measured 19 mm not 21 mm there. I cut the pass through to be smaller than using inverted and even so. Check the pictures. thumb.gif
post #14540 of 22188
Quote:
Originally Posted by Gabrielzm View Post

Have you seen my previous post? Have you checked this:

http://www.overclock.net/t/1521734/chessboard-sma8-build/50#post_23104531

? It will be extremely tight and might not fit at all. I measured 19 mm not 21 mm there. I cut the pass through to be smaller than using inverted and even so. Check the pictures. thumb.gif

Yes I saw, good post there. But from drawings of fittings total height is 21 mm. Well if use UT60 instead of GTX/SR it will fit for sure.

Although it will be not too aesthetical to use C04 upside down.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club