Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 1559

post #15581 of 22267
Quote:
Originally Posted by SteezyTN View Post

That's what I was thinking, but didn't know if it would work. That does seem like my only option too lol. Looks like I'll be doing that tonight. I have tomorrow off, but I have a lot of studying to do before Wednesday. Thank man.

Oh, TCO it's going to work out good with my 360. Cables fit nicely! I'll be moving all the cables except the GPU cables to the other side soon. I will be making the 560 tubing with excess, so that way i can just remove the radiator and do maintenance if I ever need to smile.gif


Excellent to hear! Glad the 360 is still allow you enough room thumb.gif

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #15582 of 22267
Quote:
Originally Posted by TheCautiousOne View Post

Excellent to hear! Glad the 360 is still allow you enough room thumb.gif

TCO
Everything is working according to plan smile.gif it's kind of a pain to remove the radiator with the 1300 G2, so I'm going to make my 360 permanent. It's a breeze to remove the 560, so that's what I'll do if I need to do anything down there. My builds coming along nicely. My flex tubing and fans are coming tomorrow and maybe I'll try and do the pass through holes tomorrow too.
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
post #15583 of 22267
Quote:
Originally Posted by SteezyTN View Post

Everything is working according to plan smile.gif it's kind of a pain to remove the radiator with the 1300 G2, so I'm going to make my 360 permanent. It's a breeze to remove the 560, so that's what I'll do if I need to do anything down there. My builds coming along nicely. My flex tubing and fans are coming tomorrow and maybe I'll try and do the pass through holes tomorrow too.

Just get the passthroughs done, as you will let out a Sigh of Relief.

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #15584 of 22267
Quote:
Originally Posted by TheCautiousOne View Post

Just get the passthroughs done, as you will let out a Sigh of Relief.

TCO
I'll try and get them done before todaysover, or at least just figure out and mark where I'll be drilling. School started back yesterday, and I just have so much studying to do.
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
post #15585 of 22267
Hi guys,

After ditching the SMA8 due to not being able to fit 2 560 Radiators in the bottom I think I go one up and take the TH10A together with the pedestal which should be able to carry 2 560 (4*140mm) Radiators in the pedestal. Those two I plan to use for a GPU loop and 2 480 (120*4) Radiators in the top of the case for the CPU and chipset loop.

All radiators should work push pull but I am concerned on the optimal airflow:

Now I cant live with the thought using the top 480 Radiators as intake blowing hot air into the case so I want to set them as exhaust and to make sure temp is always as cool as the outside I will install 8 intake case fans in the front (4 each side) bringing fresh air into the case.

My bigger concern is the pedestal configuration. First I thought I take the front as intake and punch the air all through the first then the 2nd radiator out of the back. Now that would leave the 2nd Radiator hotter than the first and should not be optimal or?

Can I somehow leave the bottom of the pedestal open and pull air into the middel and set both 560 as exhaust? I am quite a bit pedantic and even if its marginal would like to get the best possible out of this (I guess we all are a bit freaky with these machines here I guess smile.gif).

But guys I am so much looking forward to this. I dream on fans and radiators already.

Actually just finsihed my current setup which was planned to be a small gpu update and turned into fuill new pc with AIO H110i and then i swapped the fans then thought well some more radiator space wouzd be nice and the quality could be more solid and bang here I am completely addicted to this.

Spent all Sunday watching Ronsanut on Youtube building his latest rig.

Luckily I dont have a small spare room. Just imagine having the pc itself in a separate room and only cables onto the desk through the wall to the room with the desk. You could install a real outside climate system and cool down the entire room with the PC to 7 degrees while sitting in the other room well tempered. Imagine the super cooling as you cant just achieve a good delta but an amazing total coolance.

Ok enough dreamed for now.

Cheers,

Stefan
Edited by stefxyz - 8/25/15 at 11:45am
post #15586 of 22267
So quick question again. I'll soon be marking where to drill my passthroughs. I still need a drill but that's big enough for the holes. My Bitspower passthroughs (the silver versions) are exactly one inch in diameter. But the actual part that goes into the hole is 3/4 inches. Is this the type of drill bit I can use?



I remember a few others posting the sizes and everything, as well as linking me to shank step drill bit, but I'm not going to pay $30 plus for a drill bit.
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
post #15587 of 22267
Quote:
Originally Posted by SteezyTN View Post

So quick question again. I'll soon be marking where to drill my passthroughs. I still need a drill but that's big enough for the holes. My Bitspower passthroughs (the silver versions) are exactly one inch in diameter. But the actual part that goes into the hole is 3/4 inches. Is this the type of drill bit I can use?



I remember a few others posting the sizes and everything, as well as linking me to shank step drill bit, but I'm not going to pay $30 plus for a drill bit.

I paid 30$ for a step drill bit, because I only wanted to do it once.....

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #15588 of 22267
No Use a center punch first to get a good indent in the metal and then use this step drill bit. Works like a charm

post #15589 of 22267
Sorry TCO...for stepping on your post smile.gif
post #15590 of 22267
Quote:
Originally Posted by TheCautiousOne View Post

I paid 30$ for a step drill bit, because I only wanted to do it once.....

TCO
When I drilled my holes to mount the Pump/res', I only did it once (besides my stupidity and accidentally moving the base so they didn't line up lol). I dont see how the only way is to use the shank step drill bit.
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4770k ASUS Maximus VI Hero EVGA GTX Titan X SC Corsair Vengeance Pro 16GB 1866 
MonitorPowerCaseOther
ASUS PB278Q EVGA 1300 G2 Caselabs SMA8 2x XSPC 270 Photon D5 PWM Sleeved 
OtherOtherOtherOther
Corsair Link Commander Mini 28x Primochill Revolver Fittings XSPC RX480 V3 Black Ice Nemesis 560GTS 
OtherOtherOtherOther
XSPC RX240 V3 XSPC RX360 V3 2x EK-FC Titan X Waterblock Nickel - Acetal 2x EK-FC Titan X Backplate - Red 
Other
12x Corsair SP120 Quiet Edition 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club