Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 1577

post #15761 of 22477
Still one month till uni starts. Enough time for all that tube bending and psu sleeving biggrin.gif
post #15762 of 22477
Can an SMA8 owner please measure the distance from the front case feet to front case, and the back case feet to the back case? I need to know if this will fit on my desk worriedsmiley.gif I would also like to know the distance between the back case feet and front case feet
Edited by ali13245 - 8/31/15 at 3:13pm
post #15763 of 22477
Quote:
Originally Posted by ali13245 View Post

Can an SMA8 owner please measure the distance from the front case feet to front case, and the back case feet to the back case? I need to know if this will fit on my desk worriedsmiley.gif I would also like to know the distance between the back case feet and front case feet
Quote:
Exterior (width x depth x height) 11.25" x 26.56" x 25.75" (286m x 675mm x 654mm)
(dimensions shown are for the case only. Rubber feet add .75’’ (19mm) to height, optional standard casters add 2.6’’ (67mm) and HD Casters add 3’’ (76mm))
So if 286m x 675mm or 11.25" x 26.56" works, then you are good.
post #15764 of 22477
Any RAM kits you guys might recommend for easy heatsink removal? I saw too many pics of broken memory banks and Im not so sure mine will survive my big hands biggrin.gif
post #15765 of 22477
Quote:
Originally Posted by Anateus View Post

Any RAM kits you guys might recommend for easy heatsink removal? I saw too many pics of broken memory banks and Im not so sure mine will survive my big hands biggrin.gif
You can always go for ram without a heatsink, like Crucial DDR4 2133MHz
post #15766 of 22477
2133 is so low, just waste of money
post #15767 of 22477
There are no bare kits, 2x8GB 2400Mhz I am looking after all have heatsinks. Although I've read that G.Skill honors their lifetime warranty even when you remove heatsinks.
post #15768 of 22477
Quote:
Originally Posted by Anateus View Post

There are no bare kits, 2x8GB 2400Mhz I am looking after all have heatsinks. Although I've read that G.Skill honors their lifetime warranty even when you remove heatsinks.
Then only option left is Corsair Dominator Platinum: http://www.corsair.com/se-fi/memory/dominator-platinum
It should only be a few screws plus thermal pads that keep it together:
post #15769 of 22477
Quote:
Originally Posted by OddsCrazyStuff View Post

Then only option left is Corsair Dominator Platinum: http://www.corsair.com/se-fi/memory/dominator-platinum
It should only be a few screws plus thermal pads that keep it together:

Then I guess I'll take my chances with a heatgun. Even if I fail and will have to buy a second kit... it will still be cheaper than getting dominators biggrin.gif
post #15770 of 22477
Quote:
Originally Posted by Anateus View Post

Then I guess I'll take my chances with a heatgun. Even if I fail and will have to buy a second kit... it will still be cheaper than getting dominators biggrin.gif
Seems HyperX Predator might be easy to remove as well:

But then again, all ram might be easy once you start doing it.
Edited by OddsCrazyStuff - 8/31/15 at 4:10pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club