OK, So I've been thru about every S8 build I can find on the net . . . . no small feat to be sure . . .
One thing I have not seen yet, and I sooooo want to do, is to add a front window where the upper 6 flex bays are.
That would give me windows on the right and left which would be awesome with some kind of lighted midplate.
I was originally going to put a 240 in the upper 6 flex bays, but that's such old news and been done a million times, and I can put it in the lower HDD area if I want to change where I put the HDDs anyway, . . . . or just leave it out completely.
Two 280 SR2s up top is more than sufficient for a CPU and one, or even two, GPU(s)
Having 2 windows would let me use 2 D5s with 300mm res tubes that would extend up thru the midplate and up thru the top drop in panel in front of the 280 rads and plumb up just fine above the drop in rad panel and under the 36mm, extended top.
Can anyone with an S8 with the front window, post some pics of the inner side of the outer front panel that has the window attached, please . . . . I'd appreciate it immensely.
DarleneEdited by IT Diva - 10/17/15 at 10:32am