Sometimes the seemingly little stuff still somehow seems to take forever . . .
I plumbed in the pumps so that the outlet tubing can come up along the center seam of the midplate, which keeps it so the midplate can be removed without draining the system or disconnecting anything.
Here you can see mod to the top drop in mount to accommodate the plumbing at the top of the reservoirs, and the little pump outlet stub ups . . I like how they have a cool white ring around them:
Getting the pump in forward of the side mount 240 was quite the adventure . .
Those damn caps that HWL uses suck big time, . . . since they actually stick out past the side of the rads.
I know the fitting is facing down, but I hadn't yet modded the aluminum panel and cut the passage thru the midplate to turn it up yet . . it's all that close a fit.
More room to work on the other side, but have to keep the Aquaero accessible.
Sooo much work, and what seems like so little to show for all the hours spent . . . .
Hope you like it,
DarleneEdited by IT Diva - 11/12/15 at 5:52pm