Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 1742

post #17411 of 22477
Quote:
Originally Posted by funfordcobra View Post

I'm convinced I got sent a deformed bracket. I got it on but it did not go on like any online pictures I've seen. All the others just slip on. Mine absolutely would not without cutting. The holes did not line up. I thought it was an exterior mount for a few minutes..

what are you trying to do, case and exact part you ordered?

ok you have an s8

did you buy this ?

http://www.caselabs-store.com/120-3-360-drop-in-radiator-side-mount-s8-and-s8s/

you mentioned having to fut off the knob, it sounds to me like you ordered the wrong one, you can see in that link where the "guide pin" goes, and it mounts from the exterior of the s8/s8s

your pic is far to blurry to see anything unfortunately
Quote:
Originally Posted by funfordcobra View Post

I got that drop in 360 rad. It wasn't exactally drop in although. I had to cut those tabs off the bottom of the case with a dremmel because for the life of me couldn't get it to line up in any way with them on. Unless it goes behind the tabs which then I'd have to bend the mount.


for ref


Edited by Mega Man - 1/14/16 at 11:25am
USS CLM8-1701
(39 items)
 
Her Venom
(21 items)
 
Lil Tough Guy
(15 items)
 
CPUMotherboardGraphicsGraphics
AMD FX-8350 Gigabyte 990FXA-UD7 R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  
GraphicsGraphicsRAMHard Drive
R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  F3-2400C10D-16GTX  OCZ Agility 3 120GB  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 120GB  Seagate Barracuda 1TB  Segate Barracuda 3TB Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... 
Optical DriveCoolingCoolingCooling
Pioneer BDR-208DBK Blu-ray Writer Swiftech H20-220 EDGE HD Liquid Cooling Kit Swiftech Komodo 7970 Swiftech MCP-35X2 
CoolingCoolingCoolingCooling
Swiftech MCP35X2 Heat Sink Swiftech MCP35X Reservoir Swiftech Komodo 7970 Swiftech Komodo 7970 
CoolingCoolingCoolingCooling
Alphacool 240mm XT45 Alphacool 120mm XT45 Alphacool 120mm UT60 FrozenQ PC Mods UV Meteor Light Limited Edition... 
CoolingCoolingOSOS
Koolance Radiator Mounting Bracket with Quick-R... Swiftech Komodo 7970 Windows 7 Windows 8  
MonitorMonitorMonitorMonitor
ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  XFX FXTRISTAND Triple Display Monitor Stand  
KeyboardPowerCaseMouse
Logitech G510 XFX pro 1250w black edition Caselabs MAGNUM M8 Case Razer Naga 
AudioAudioOther
Sony 2.1 Razer Megalodon XFX pro 1250w black edition 
CPUMotherboardGraphicsGraphics
8350 batch 1229 pgn  Asus Crosshair V Formula-Z gigabyte 7770 OC gigabyte 7770 OC 
RAMHard DriveHard DriveHard Drive
F3-2400C10D-16GTX OCZ agaility 3 120  OCZ Agility 3 120gb  Seagate 7200rpm 1tb 
Optical DriveOptical DriveCoolingCooling
Pioneer BDR-208DBK Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... Swiftech MCP-35X White Top Swiftech Quiet Power 240  
CoolingOSOSMonitor
Swiftech Apogee HD Windows 7 Windows 8 LG E2242 
MonitorKeyboardPowerCase
LG E2242 RAZER Black Lycosa Mirror Special Edition Seasonic x660 Cooler Master Storm Stryker 
Mouse
Razer Lachesis 
CPUMotherboardGraphicsRAM
FX 6100 Sabertooth 990fx R2.0 XFX 7770 Core Edition Samsung 1600 2x4 
RAMHard DriveOptical DriveCooling
Samsung 1600 2x4 Unknown as of now  Piorneer BDR-208DBK Swiftech H220  
OSMonitorKeyboardPower
Windows 8  Samsung 60" 120hz 3d LED TV Unknown Seasonic x750 
CaseMouseAudio
Cooler Master Storm Stryker Unknown Pioneer 5.1 
  hide details  
Reply
USS CLM8-1701
(39 items)
 
Her Venom
(21 items)
 
Lil Tough Guy
(15 items)
 
CPUMotherboardGraphicsGraphics
AMD FX-8350 Gigabyte 990FXA-UD7 R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  
GraphicsGraphicsRAMHard Drive
R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  F3-2400C10D-16GTX  OCZ Agility 3 120GB  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 120GB  Seagate Barracuda 1TB  Segate Barracuda 3TB Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... 
Optical DriveCoolingCoolingCooling
Pioneer BDR-208DBK Blu-ray Writer Swiftech H20-220 EDGE HD Liquid Cooling Kit Swiftech Komodo 7970 Swiftech MCP-35X2 
CoolingCoolingCoolingCooling
Swiftech MCP35X2 Heat Sink Swiftech MCP35X Reservoir Swiftech Komodo 7970 Swiftech Komodo 7970 
CoolingCoolingCoolingCooling
Alphacool 240mm XT45 Alphacool 120mm XT45 Alphacool 120mm UT60 FrozenQ PC Mods UV Meteor Light Limited Edition... 
CoolingCoolingOSOS
Koolance Radiator Mounting Bracket with Quick-R... Swiftech Komodo 7970 Windows 7 Windows 8  
MonitorMonitorMonitorMonitor
ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  XFX FXTRISTAND Triple Display Monitor Stand  
KeyboardPowerCaseMouse
Logitech G510 XFX pro 1250w black edition Caselabs MAGNUM M8 Case Razer Naga 
AudioAudioOther
Sony 2.1 Razer Megalodon XFX pro 1250w black edition 
CPUMotherboardGraphicsGraphics
8350 batch 1229 pgn  Asus Crosshair V Formula-Z gigabyte 7770 OC gigabyte 7770 OC 
RAMHard DriveHard DriveHard Drive
F3-2400C10D-16GTX OCZ agaility 3 120  OCZ Agility 3 120gb  Seagate 7200rpm 1tb 
Optical DriveOptical DriveCoolingCooling
Pioneer BDR-208DBK Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... Swiftech MCP-35X White Top Swiftech Quiet Power 240  
CoolingOSOSMonitor
Swiftech Apogee HD Windows 7 Windows 8 LG E2242 
MonitorKeyboardPowerCase
LG E2242 RAZER Black Lycosa Mirror Special Edition Seasonic x660 Cooler Master Storm Stryker 
Mouse
Razer Lachesis 
CPUMotherboardGraphicsRAM
FX 6100 Sabertooth 990fx R2.0 XFX 7770 Core Edition Samsung 1600 2x4 
RAMHard DriveOptical DriveCooling
Samsung 1600 2x4 Unknown as of now  Piorneer BDR-208DBK Swiftech H220  
OSMonitorKeyboardPower
Windows 8  Samsung 60" 120hz 3d LED TV Unknown Seasonic x750 
CaseMouseAudio
Cooler Master Storm Stryker Unknown Pioneer 5.1 
  hide details  
Reply
post #17412 of 22477
Quote:
Originally Posted by Mega Man View Post

Quote:
Originally Posted by funfordcobra View Post

I'm convinced I got sent a deformed bracket. I got it on but it did not go on like any online pictures I've seen. All the others just slip on. Mine absolutely would not without cutting. The holes did not line up. I thought it was an exterior mount for a few minutes..

what are you trying to do, case and exact part you ordered?

ok you have an s8

did you buy this ?

http://www.caselabs-store.com/120-3-360-drop-in-radiator-side-mount-s8-and-s8s/

you mentioned having to fut off the knob, it sounds to me like you ordered the wrong one, you can see in that link where the "guide pin" goes, and it mounts from the exterior of the s8/s8s

your pic is far to blurry to see anything unfortunately
Quote:
Originally Posted by funfordcobra View Post

I got that drop in 360 rad. It wasn't exactally drop in although. I had to cut those tabs off the bottom of the case with a dremmel because for the life of me couldn't get it to line up in any way with them on. Unless it goes behind the tabs which then I'd have to bend the mount.


for ref



The side mount 360 bracket that I got for my S8 looks slightly modified from the pics on the CL site.

It appears that they made provisions for multi-port rads with ports on both sides, and so the fittings can go to either the front or rear.

The issue may be that the spaces for the port bosses may not align with all multi-port rads.

I took the little center section out on the front end for easier access to plumb the pump, but it originally looked the same as the rear at the rear.




D.
post #17413 of 22477


Yea the exact same one. As you can see, there was no way I could drop that in with the tabs. They didn't line up for so e reason. Nevertheless it went on and is just fine lol. The tabs were about 1\8 of an inch below where they should be. I thought I had it upside down then backwards but cutting the tabs was the only solution.
Edited by funfordcobra - 1/14/16 at 3:07pm
post #17414 of 22477
Ha just figured it out.. My left side of my case is really my right and both sides are identical EXCEPT the tab positioning lmao. If I would have put the 360 on my PSU side it would have dropped right in.. =p
post #17415 of 22477
Quote:
Originally Posted by IT Diva View Post

The side mount 360 bracket that I got for my S8 looks slightly modified from the pics on the CL site.

It appears that they made provisions for multi-port rads with ports on both sides, and so the fittings can go to either the front or rear.

The issue may be that the spaces for the port bosses may not align with all multi-port rads.

I took the little center section out on the front end for easier access to plumb the pump, but it originally looked the same as the rear at the rear.




D.

Mine looks the same D.

Have you figured out how you're going to mount your two outer 120mm fans for the 240mm radiator, how they mount to the rad thru the mount?

Once I mounted my 240 rad I cant find eight open mounting holes "that line up" for the two fans, heck I'd settle for two per fan but I keep sliding the rad forward and backward, looking for a way to make it work, I must be missing something here. headscratch.gif

Guess I could simply Velcro the two fans onto the mount.




IMG_4131_zpsxpgx8zl3.jpg
Edited by iBruce - 1/14/16 at 3:33pm
     
CPUMotherboardGraphicsRAM
Intel 6800K from Siliconlottery binned at 4.4GH... Rampage V Edition 10, OH DEAR GOD! :) EVGA 980 KingPin Gskill TridentZ DDR4 3200MHz 14 latency 32GB Qu... 
Hard DriveCoolingOSKeyboard
Samsung 960 EVO 250GB NVMe SSD with AquaCompute... EK-R5E10 monoblock, EK-XTOP REVO Plexi, EK-RES ... Windows 10 64-Bit Happy Hacking HHKB Professional 2 Type - S whit... 
PowerCaseMouseMouse Pad
Seasonic Prime Titanium 850watt  CaseLabs Mercury S8S two-tone gunmetal interior... Logitech MX Master wireless Bluetooth in Gray a... Razer solid Aluminum 
CPUMotherboardGraphicsRAM
Intel 6700K 4.8GHz binned and delidded, absolut... Asus Maximus VIII Extreme, all original red acc... AMD WX 4100 Workstation Card Gskill TridentZ DDR4 3200MHz latency 14-14-14-3... 
Hard DriveCoolingOSKeyboard
Intel 750 NVMe SSD 400GB  EK D5 XRES REVO pump top/res with white res top... Windows 10 64-Bit HHKB Pro 2 Type-S white frame, white gray PBT ... 
PowerCaseMouseMouse Pad
Seasonic Snow Silent 750watt Platinum CaseLabs Mercury S8 Open Air Bench all gunmetal... Logitech MX Master in gray and white Razor Manticor Aluminum 
AudioOther
Dell monitor soundbar from 2009 horrible : ( Hardware Labs satin white Multiport radiators i... 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel 6800K from Siliconlottery binned at 4.4GH... Rampage V Edition 10, OH DEAR GOD! :) EVGA 980 KingPin Gskill TridentZ DDR4 3200MHz 14 latency 32GB Qu... 
Hard DriveCoolingOSKeyboard
Samsung 960 EVO 250GB NVMe SSD with AquaCompute... EK-R5E10 monoblock, EK-XTOP REVO Plexi, EK-RES ... Windows 10 64-Bit Happy Hacking HHKB Professional 2 Type - S whit... 
PowerCaseMouseMouse Pad
Seasonic Prime Titanium 850watt  CaseLabs Mercury S8S two-tone gunmetal interior... Logitech MX Master wireless Bluetooth in Gray a... Razer solid Aluminum 
CPUMotherboardGraphicsRAM
Intel 6700K 4.8GHz binned and delidded, absolut... Asus Maximus VIII Extreme, all original red acc... AMD WX 4100 Workstation Card Gskill TridentZ DDR4 3200MHz latency 14-14-14-3... 
Hard DriveCoolingOSKeyboard
Intel 750 NVMe SSD 400GB  EK D5 XRES REVO pump top/res with white res top... Windows 10 64-Bit HHKB Pro 2 Type-S white frame, white gray PBT ... 
PowerCaseMouseMouse Pad
Seasonic Snow Silent 750watt Platinum CaseLabs Mercury S8 Open Air Bench all gunmetal... Logitech MX Master in gray and white Razor Manticor Aluminum 
AudioOther
Dell monitor soundbar from 2009 horrible : ( Hardware Labs satin white Multiport radiators i... 
  hide details  
Reply
post #17416 of 22477
Quote:
Originally Posted by iBruce View Post

Quote:
Originally Posted by IT Diva View Post

The side mount 360 bracket that I got for my S8 looks slightly modified from the pics on the CL site.

It appears that they made provisions for multi-port rads with ports on both sides, and so the fittings can go to either the front or rear.

The issue may be that the spaces for the port bosses may not align with all multi-port rads.

I took the little center section out on the front end for easier access to plumb the pump, but it originally looked the same as the rear at the rear.
Warning: Spoiler! (Click to show)

D.

Mine looks the same D.

Have you figured out how you're going to mount your two outer 120mm fans for the 240mm radiator, how they mount to the rad thru the mount?

Once I mounted my 240 rad I cant find eight open mounting holes "that line up" for the two fans, heck I'd settle for two per fan but I keep sliding the rad forward and backward, looking for a way to make it work, I must be missing something here. headscratch.gif

Guess I could simply Velcro the two fans onto the mount.

Warning: Spoiler! (Click to show)
IMG_4131_zpsxpgx8zl3.jpg


Unless your rad is wonky, you have it too far back.

The 360 mount is designed to index from the center fan position, the one with holes instead of slots.

For a 240 rad, the front fan goes in the center fan position of the bracket.

The screws should go thru the fans, the bracket, and then into the rad. M4 X 30 mm screws worked fine since HWL uses M4 threading.

If you're 6-32, then use 1.25" length and a washer if it's a smidge too long.

I'm using HWL SR2 multi-ports, and they drop right in.

In the pics below, you can see the rad and fans positioned and the front little bit of bracket cut away for the tubing plumbing.

Darlene








Edited by IT Diva - 1/14/16 at 4:21pm
post #17417 of 22477
Quote:
Originally Posted by IT Diva View Post

Unless your rad is wonky, you have it too far back.

The 360 mount is designed to index from the center fan position, the one with holes instead of slots.

For a 240 rad, the front fan goes in the center fan position of the bracket.

The screws should go thru the fans, the bracket, and then into the rad. M4 X 30 mm screws worked fine since HWL uses M4 threading.

If you're 6-32, then use 1.25" length and a washer if it's a smidge too long.

I'm using HWL SR2 multi-ports, and they drop right in.

In the pics below, you can see the rad and fans positioned and the front little bit of bracket cut away for the tubing plumbing.

Darlene








Wow, your build looks amazing, did not realize enough space existed lateral to the radiator for 90 degree adapters and fittings, maybe I should rethink my tubing runs. thinking.gif

My fault, I should have offered more information, I cannot use the (8) indexed common mounting holes since I'm not hard-mounting my fans.

My dilemma is trying to use the minimum number of EK 6-32 screws to hard-mount the rad to the CaseLabs 360 mount and then find different adjacent separate mounting holes that line up with the fans for the soft silicon grommets.

Four screws seems the minimum number to support the rad just fine, but then lining up the soft grommets is proving problematic.

I may just use a 240 radiator gasket as a soft mount and then Velcro those two fans.

It is a bit of extra trouble to make all moving parts inaudible, but I'm trying my best. thumb.gif

The other side of the XE rad the PULL side (of the PUSH-PULL) mounting fans there is simple since the rad is already mounted to the CL internal bracket, all eight indexed holes are accessible for soft mounting those two fans with the silicon grommets.

.
Edited by iBruce - 1/14/16 at 5:55pm
     
CPUMotherboardGraphicsRAM
Intel 6800K from Siliconlottery binned at 4.4GH... Rampage V Edition 10, OH DEAR GOD! :) EVGA 980 KingPin Gskill TridentZ DDR4 3200MHz 14 latency 32GB Qu... 
Hard DriveCoolingOSKeyboard
Samsung 960 EVO 250GB NVMe SSD with AquaCompute... EK-R5E10 monoblock, EK-XTOP REVO Plexi, EK-RES ... Windows 10 64-Bit Happy Hacking HHKB Professional 2 Type - S whit... 
PowerCaseMouseMouse Pad
Seasonic Prime Titanium 850watt  CaseLabs Mercury S8S two-tone gunmetal interior... Logitech MX Master wireless Bluetooth in Gray a... Razer solid Aluminum 
CPUMotherboardGraphicsRAM
Intel 6700K 4.8GHz binned and delidded, absolut... Asus Maximus VIII Extreme, all original red acc... AMD WX 4100 Workstation Card Gskill TridentZ DDR4 3200MHz latency 14-14-14-3... 
Hard DriveCoolingOSKeyboard
Intel 750 NVMe SSD 400GB  EK D5 XRES REVO pump top/res with white res top... Windows 10 64-Bit HHKB Pro 2 Type-S white frame, white gray PBT ... 
PowerCaseMouseMouse Pad
Seasonic Snow Silent 750watt Platinum CaseLabs Mercury S8 Open Air Bench all gunmetal... Logitech MX Master in gray and white Razor Manticor Aluminum 
AudioOther
Dell monitor soundbar from 2009 horrible : ( Hardware Labs satin white Multiport radiators i... 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel 6800K from Siliconlottery binned at 4.4GH... Rampage V Edition 10, OH DEAR GOD! :) EVGA 980 KingPin Gskill TridentZ DDR4 3200MHz 14 latency 32GB Qu... 
Hard DriveCoolingOSKeyboard
Samsung 960 EVO 250GB NVMe SSD with AquaCompute... EK-R5E10 monoblock, EK-XTOP REVO Plexi, EK-RES ... Windows 10 64-Bit Happy Hacking HHKB Professional 2 Type - S whit... 
PowerCaseMouseMouse Pad
Seasonic Prime Titanium 850watt  CaseLabs Mercury S8S two-tone gunmetal interior... Logitech MX Master wireless Bluetooth in Gray a... Razer solid Aluminum 
CPUMotherboardGraphicsRAM
Intel 6700K 4.8GHz binned and delidded, absolut... Asus Maximus VIII Extreme, all original red acc... AMD WX 4100 Workstation Card Gskill TridentZ DDR4 3200MHz latency 14-14-14-3... 
Hard DriveCoolingOSKeyboard
Intel 750 NVMe SSD 400GB  EK D5 XRES REVO pump top/res with white res top... Windows 10 64-Bit HHKB Pro 2 Type-S white frame, white gray PBT ... 
PowerCaseMouseMouse Pad
Seasonic Snow Silent 750watt Platinum CaseLabs Mercury S8 Open Air Bench all gunmetal... Logitech MX Master in gray and white Razor Manticor Aluminum 
AudioOther
Dell monitor soundbar from 2009 horrible : ( Hardware Labs satin white Multiport radiators i... 
  hide details  
Reply
post #17418 of 22477
Quote:
Originally Posted by iBruce View Post

Quote:
Originally Posted by IT Diva View Post

Unless your rad is wonky, you have it too far back.

The 360 mount is designed to index from the center fan position, the one with holes instead of slots.

For a 240 rad, the front fan goes in the center fan position of the bracket.

The screws should go thru the fans, the bracket, and then into the rad. M4 X 30 mm screws worked fine since HWL uses M4 threading.

If you're 6-32, then use 1.25" length and a washer if it's a smidge too long.

I'm using HWL SR2 multi-ports, and they drop right in.

In the pics below, you can see the rad and fans positioned and the front little bit of bracket cut away for the tubing plumbing.

Darlene
Warning: Spoiler! (Click to show)







Wow, your build looks amazing, did not realize enough space existed lateral to the radiator for 90 degree adapters and fittings, maybe I should rethink my tubing runs. thinking.gif

My fault, I should have offered more information, I cannot use the (8) indexed common mounting holes since I'm not hard-mounting my fans.

My dilemma is trying to use the minimum number of EK 6-32 screws to hard-mount the rad to the CaseLabs 360 mount and then find different adjacent separate mounting holes that line up with the fans for the soft silicon grommets.

Four screws seems the minimum number to support the rad just fine, but then lining up the soft grommets is proving problematic.

I may just use a 240 radiator gasket as a soft mount and then Velcro those two fans.

It is a bit of extra trouble to make all moving parts inaudible, but I'm trying my best. thumb.gif

The other side of the XE rad the PULL side (of the PUSH-PULL) mounting fans there is simple since the rad is already mounted to the CL internal bracket, all eight indexed holes are accessible for soft mounting those two fans with the silicon grommets.

.



That makes it a little harder, but still a fairly simple solution perhaps . . . . .

Make some short studs from threaded rod that thread into your rad, and use some threaded female-female standoffs, about 1/2" long as nuts to hold the rad to the bracket.-- be sure to make the studs just long enough so that they only engage about half the length of the standoffs. . . Use thread locker red to secure the stud in the rad so you can't accidently screw it in too far when you put the standoffs on as nuts.

Then relieve the fan mounting hole diameter so it fits over the standoffs on just the side of the fan that sits against the bracket.

Now use shorter screws from the outside of the fans to hold then to the assembly via the standoffs . . .

If you select the stud and screw lengths appropriately, you can have a 7mm thick rubber gasket between the outer fans and the bracket as well as one between the rad and the inner side of the bracket for near total isolation.


Something like this, but add the damping grommets of your choice:




Re-reading your description, it looks like you don't need to isolate the rad from the bracket, so instead of studs and female-female standoffs with an inner rubber gasket, you could just use male to female standoff to secure the rad to the bracket, which is what I did in the build pic above.

It made it very quick and easy to swap out all the fans at once without the rad coming loose.

Darlene
Edited by IT Diva - 1/15/16 at 3:37am
post #17419 of 22477
6mm or 8mm screws to mount rad to top of case labs case. (Non drop in). Just double checking before clicking the payment button thanks in advance. @ItDiva I just picked up some of the replacement revolver caps XSPC had them on sale for half off. I picked up the black ones. I do like them but wish they were not as bulky or at least have 90s adapters that our our bigger to look flush. Loving the build btw
Edited by emsj86 - 1/15/16 at 7:58am
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
post #17420 of 22477
Final pics of my S5 build :







New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club