A little while back, I was pondering, as I anticipated my two tone S5 I had just ordered, if a 360 rad wouldn't squeeze into the lower left drives area, if it had minimal dimensions for the size.
As it turned out, I was in the right place at the right time, and was able to buy Journeyman Mike's when he mentioned it being in the marketplace, here in the thread.
I finally got a little bit of time to assemble it to see where I might want to go with it, mods wise, and you can indeed, shoehorn a XT45 - 360 rad in the HDD -SSD area with room to spare, with the right mounting brackets, and a little tweaking.
Could actually get a UT60 in there if I pushed the drive mounting studs out of the mid chassis . . .
You can let the fan mounting screws and fan housings, extend out beyond the lower chassis edge by almost a quarter inch, as the side panel sits out away from the chassis edges, and the nuts on the window are higher than the rad, so they don't interfere.
Once I get some time, I'll work on the front window mod to put full width front windows to match up to the side windows on the S5 and the S8S, should be a nice open look, especially when the full window top for the S5 gets here.Edited by IT Diva - 8/20/16 at 8:58pm