Originally Posted by LunaP
Hey guys quick question for those w/ TH10 series cases and or even MH10. Wondering if its possible to hook up a XSPC Res OR res/pump combo like in the photo here WITHOUT screwing in additional holes, and if so how would I go about it? If not what screw size is usually best and how's the vibration/ratling (for the combos?)
Just taking this into consideration for a 2nd res and or combores.
I'm assuming your referring to the res that's free standing by itself on the floor in the middle of the case and not the one mounted to the mobo tray.
Since that photo shows one of the vertical accessory mounting bars, it would make sense to get one or two accessory mounting plates to attach to that vertical bar and use it to mount an additional res. two of the small accessory mounts (1 top and 1 bottom with a big res like you have on the mobo tray) should give enough strength. It might obstruct some airflow but......... Otherwise, you could use a Bitspower D5 pump top and the res upgrade and use the included mount to mount to the floor. If you did the drilling on one of those removable fan hole covers and used the included rubber dampers, you won't have much if any vibes or rattling.
I don't remember screw hole size that the pump top mounts come with. But i have used both 6-32 and M4-.7 to mount them with (depended on the case, caselabs uses a lot of 6-32 for their cases so for builds I do in their cases I use 6-32 personally).
And I don't have a TH10 or MH10; I have 1 STH10, 2 SM8's and an S3. So I don't know if my post will count or not.