Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 402

post #4011 of 22474
Quote:
Originally Posted by Anoxy View Post

So it doesn't look like these cases come with dust filters. Would I need to purchase them separately? Or do you guys just not use them?

which case are you getting? demciflex has filters for some of caselabs cases.
LEGION
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7 6700K ASUS Maximus VIII Impact EVGA GTX TITAN X G.skill 16gb 3200 ddr4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 pro 250gb Samsung 840 evo 250gb Samsung 840 evo 250gb Ice kings magic. 
OSMonitorKeyboardPower
WIN 10 Wasabi Mango 42" 4k Corsair k70 EVGA 1000w P2 
CaseMouseAudio
Caselabs Mercury S3 Razer naga :( sennheiser HD 558 
  hide details  
Reply
LEGION
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7 6700K ASUS Maximus VIII Impact EVGA GTX TITAN X G.skill 16gb 3200 ddr4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 pro 250gb Samsung 840 evo 250gb Samsung 840 evo 250gb Ice kings magic. 
OSMonitorKeyboardPower
WIN 10 Wasabi Mango 42" 4k Corsair k70 EVGA 1000w P2 
CaseMouseAudio
Caselabs Mercury S3 Razer naga :( sennheiser HD 558 
  hide details  
Reply
post #4012 of 22474
I am eyeing the M8, not entirely set on buying yet though.

Mostly I'm just looking for a case to transplant my build into that can fit a UT60 360, UT60 240, and a Monsta 240. This M8 seems to be the best choice...
Edited by Anoxy - 1/3/14 at 5:05pm
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
post #4013 of 22474
Quote:
Originally Posted by Anoxy View Post

So it doesn't look like these cases come with dust filters. Would I need to purchase them separately? Or do you guys just not use them?
I just don't use them, no carpet in our home, we are fairly clean housekeepers, and I own a compressor to blow it out every couple of months. I have found that a radiator does pretty good as a dust filter, lol.
post #4014 of 22474
Any other suggestions guys?
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
post #4015 of 22474
Quote:
Originally Posted by LunaP View Post

Any other suggestions guys?

Its gotta be your A6. If you have a dvd drive, and it fits on all the openings for 5.25 drive bays, your case is good. The drivebay brackets are designed for 5.25 devices. No different then any other case that can fit 5.25 bay devices.

Without the CL brackets, does the A6 w/ the faceplate fit through the opening of the bays?
post #4016 of 22474
Quote:
Originally Posted by wermad View Post

Its gotta be your A6. If you have a dvd drive, and it fits on all the openings for 5.25 drive bays, your case is good. The drivebay brackets are designed for 5.25 devices. No different then any other case that can fit 5.25 bay devices.

Without the CL brackets, does the A6 w/ the faceplate fit through the opening of the bays?

Yup as stated above, So yeah apparently the CL mounting plates go inwards about 1cm on each side which kills the spacing needed for this, and this can't be mounted without them either, so due to the width, and ever after drilling out it's still not fitting, so looking to more than likely return it if possible.
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
post #4017 of 22474
Quote:
Originally Posted by LunaP View Post

Any other suggestions guys?

I'll try and help.
My Aquaero 5 slots straight in - no problems.
I also have an Aquaero 4 not installed I can use a reference on this end, I'll get bits 'n pieces ready for that now.
Again I'm sure a simple oversight just not spotted yet.

Can you start a new thread and provide the link.
Post as many pictures and relevant things you've tries in that thread so some others may offer advice also, that don't know back ground.
Can you please re-assemble the Aquaero and attach to the mounting brackets.
If you have a set square or sliding bevel set at 90, let's just check that it's all square before even trying to fit in the case
post #4018 of 22474
Quote:
Originally Posted by LunaP View Post

Yup as stated above, So yeah apparently the CL mounting plates go inwards about 1cm on each side which kills the spacing needed for this, and this can't be mounted without them either, so due to the width, and ever after drilling out it's still not fitting, so looking to more than likely return it if possible.

That's weird. The bracket should have a hole to line up w/ the post/peg on the case and the screw hole for the thumbscrew. This leaves the vertical surface inline w/ the 5.25 opening. Not sure how you're mounting this or CL sent you the wrong brackets or you're using the wrong bracket.




Red lines are the side where it meets the bay device to eventually screw on to it. The green lines are my NZXT Mix 2 5.25" fan controller.
post #4019 of 22474
Quote:
Originally Posted by wermad View Post

That's weird. The bracket should have a hole to line up w/ the post/peg on the case and the screw hole for the thumbscrew. This leaves the vertical surface inline w/ the 5.25 opening. Not sure how you're mounting this or CL sent you the wrong brackets or you're using the wrong bracket.




Red lines are the side where it meets the bay device to eventually screw on to it. The green lines are my NZXT Mix 2 5.25" fan controller.

it's exactly like that

but I'll do what you guys said and start a thread.
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
post #4020 of 22474
Quote:
Originally Posted by LunaP View Post

it's exactly like that

but I'll do what you guys said and start a thread.


Measure the tongue that attaches to the case. I'll measure the ones I have in bit..
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club