Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 432

post #4311 of 22194
Quote:
Originally Posted by LunaP View Post

Appreciate it, I may have to get a riser cable if anything since I'm going Tri-Sli and putting in a Sound card possibly.
Ah is there one for the front audio as well? It stops half way and I need another 8-12" for it to reach the motherboard for the HD audio.

Just curious why a sound card as I thought the sound was real good on the RIVE BE??
post #4312 of 22194
Quote:
Originally Posted by Ragsters View Post

I'm pretty sure I have one that I don't use made by NZXT that I can mail to you.

Appreciate it, I'll let you know if I end up going that route.
Quote:
Originally Posted by seross69 View Post

Just curious why a sound card as I thought the sound was real good on the RIVE BE??

Been getting a LOT of feedback from users in our club about it and on their build logs, I'm a definite audiophile as well so I usually peak interest when hearing from others, and so far the difference between the onboard and the SB Z(x/r) cards seems to be quite noticeable.
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
Sylphiel
(20 items)
 
Yuna
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 Extreme 980X Gigabyte X58A-UD3R eVGA GTX TITAN Corsair 
RAMHard DriveOptical DriveCooling
Corsair  Corsair SSD Samsung BluRay R/W Corsair H90 
OSMonitorMonitorMonitor
Windows 7 Ultimate HP w2338h HP w2338h HP w2338h 
MonitorMonitorKeyboardPower
HP w2338h Samsung 46" TV ROCCAT Antex 1200W Silver 
CaseMouseMouse PadAudio
Cosmos Corsair m95 ALLSOP Onboard 
  hide details  
Reply
post #4313 of 22194
Thread Starter 
Quote:
Originally Posted by LunaP View Post

Appreciate it, I'll let you know if I end up going that route.
Been getting a LOT of feedback from users in our club about it and on their build logs, I'm a definite audiophile as well so I usually peak interest when hearing from others, and so far the difference between the onboard and the SB Z(x/r) cards seems to be quite noticeable.

I'm a big fan of external audio e.g. usb dac etc. It makes life so much easier, particularly if you have multiple rigs and frees up the boards to be used to their max. I.E. 4 gpu for ATX, 2 gpu for matx, 1 for mitx. A board should be full of GPUs or you did it wrong rolleyes.gif
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
post #4314 of 22194
Quote:
Originally Posted by NYMD View Post

I have 3x e-loops in the PSU side front bays.
Right now they are intake but that doesn't feel like they are doing much for me since both sides of my case are mostly walled off from each other.
Should I switch them around to be exhaust so they are exhausting the warm air from the two PSU side radiators that are also on intake?

Didin't see any other replies so hope this helps you OR prompts a reply with better advice from some one else.

Couple different theories to consider here....especially given both top and bottom rad fans are intake.
  • Where ever possible feeding the rads fresh air from outside the case
  • Exhausting hot air out of the case - more so with air cooling but still relevant to a certain extent when underwater.

If I was running that set-up and I sort of will be if I ever find time to do some work on this build Warning: Spoiler! (Click to show)
I would run the top rad with fans as exhaust, rather than intake as you have.
Keep the front fans as intake - blowing air in to blend with warm air from bottom rad.
This will keep the positive pressure in the case with excess pressure venting out rear of case.
post #4315 of 22194
I have to agree with this ^^. That's exactly how I would arrange the fans too.
post #4316 of 22194
Quote:
Originally Posted by fast_fate View Post

Didin't see any other replies so hope this helps you OR prompts a reply with better advice from some one else.

Couple different theories to consider here....especially given both top and bottom rad fans are intake.
  • Where ever possible feeding the rads fresh air from outside the case
  • Exhausting hot air out of the case - more so with air cooling but still relevant to a certain extent when underwater.

If I was running that set-up and I sort of will be if I ever find time to do some work on this build Warning: Spoiler! (Click to show)
I would run the top rad with fans as exhaust, rather than intake as you have.
Keep the front fans as intake - blowing air in to blend with warm air from bottom rad.
This will keep the positive pressure in the case with excess pressure venting out rear of case.

what is the meanwell PSU for???
post #4317 of 22194
Quote:
Originally Posted by WiLd FyeR View Post



Thanks guys for looking into this. REP+ Much appreciated..

Ok so the total length of the BP 150 res with the vertical mod kit is about 270mm. You have to add about 30mm for a 90 degree fitting on top for the return line so overall 300mm.

Depending on the setup you want in your S5 it will fit or not...

If you put a 360 rad (even a 38mm) with one bank of fans it won't fit since this setup eats almost all the first flex-bay and the 300mm pump/res/fitting setup reach a bit more than the half of the top flex-bay. In fact, with this setup there will be about 1 or 2 mm of free space between the fan/rad setup and the fitting...a but tight wink.gif....If you were to put an Alphacool ST30 at 30mm in height then this would fit with around 10mm of space between the fitting and the fan/rad setup. All these mesurement is done by using something like a 3/8"x1/2" BP 90 fitting on top of the res.

If you only put fans in the top or nothing then it will fit without any problems.


I hope it helps and feel free to ask other questions thumb.gif
Silent Watcher
(9 items)
 
Eclipse
(7 items)
 
Lady Sif
(6 items)
 
CPUMotherboardGraphicsGraphics
Intel I7-6800K Asus Rampage V Edition X99 Asus GTX 1070 STRIX-GTX1070-O8G-GAMING Asus GTX 1070 STRIX-GTX1070-O8G-GAMING 
RAMCoolingOSPower
G.SKILL TridentZ 32GB (8 x 4GB) DDR4-3200 EK Custom Dual Loop Windows 10 Home Corsair AX860i 860W 80PLUS Platinum 
Case
be quiet! Dark Base Pro 900 Black 
CPUMotherboardGraphicsGraphics
i7-6700K Gigabyte Z170X-SOC Force Gigabyte GTX 980 Ti G1 Gaming Gigabyte GTX 980 Ti G1 Gaming 
RAMPowerCase
Corsair Dominator Platinum 16GB (4 x 4GB) DDR4-... EVGA SuperNOVA P2 1200w Parvum L1.0 
CPUMotherboardGraphicsRAM
i7 4790K EVGA Z97 Stinger WiFi EVGA GTX 980 Superclock G. Skill Ripjaws Z 8Gb DDR3-2400 
Hard DriveCase
SAMSUNG 850 EVO 120GB SSD EK-Vulture 
  hide details  
Reply
Silent Watcher
(9 items)
 
Eclipse
(7 items)
 
Lady Sif
(6 items)
 
CPUMotherboardGraphicsGraphics
Intel I7-6800K Asus Rampage V Edition X99 Asus GTX 1070 STRIX-GTX1070-O8G-GAMING Asus GTX 1070 STRIX-GTX1070-O8G-GAMING 
RAMCoolingOSPower
G.SKILL TridentZ 32GB (8 x 4GB) DDR4-3200 EK Custom Dual Loop Windows 10 Home Corsair AX860i 860W 80PLUS Platinum 
Case
be quiet! Dark Base Pro 900 Black 
CPUMotherboardGraphicsGraphics
i7-6700K Gigabyte Z170X-SOC Force Gigabyte GTX 980 Ti G1 Gaming Gigabyte GTX 980 Ti G1 Gaming 
RAMPowerCase
Corsair Dominator Platinum 16GB (4 x 4GB) DDR4-... EVGA SuperNOVA P2 1200w Parvum L1.0 
CPUMotherboardGraphicsRAM
i7 4790K EVGA Z97 Stinger WiFi EVGA GTX 980 Superclock G. Skill Ripjaws Z 8Gb DDR3-2400 
Hard DriveCase
SAMSUNG 850 EVO 120GB SSD EK-Vulture 
  hide details  
Reply
post #4318 of 22194
Quote:
Originally Posted by seross69 View Post

what is the meanwell PSU for???

Iwaki RD30 - if I decide to use it rolleyes.gif still not sure

post #4319 of 22194
Quote:
Originally Posted by fast_fate View Post

Iwaki RD30 - if I decide to use it rolleyes.gif still not sure
Warning: Spoiler! (Click to show)

Nice, I have a Eheim 1262 I am using in my build. but it is 120VAC




If you was not in Australia I might would be interested in it!!
post #4320 of 22194
Thread Starter 
Quote:
Originally Posted by seross69 View Post

Nice, I have a Eheim 1262 I am using in my build. but it is 120VAC




If you was not in Australia I might would be interested in it!!

I might sell mine - I just need to get around to taking data on it. If you keep bugging me to get it done then it'll be for sale.
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club