Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 488

post #4871 of 22275
Quote:
Originally Posted by Ixander View Post

Quote:
Originally Posted by Neo Zuko View Post

I would use the psu mount myself, these AX1500i PSUs are getting heavy. What did he do with his? The case came with it no?

The pump should be right under the res for optimal gravity and to insure the pump never runs dry (or when filling the loop at the very least). This is key. The pump will break if it runs dry extremely fast. Also you should get something like this to decouple the pump vibrations:

http://www.frozencpu.com/products/21286/ex-pmp-259/Aquacomputer_Shoggy_Sandwich_Pump_Decoupling_Kit_-_Black_Black_.html

The description of the support mount says only the SM8 and the ST10 come with it, i think most of the mATX builds don't use a heavy PSU, IMO never hurts to have some extra support.

This. The SM5 didn't ship with the PSU support mount. But I didn't have any issues with just the 4 screws holding my AX850.

Well I think I jumped the gun guys...decided I can't turn my back on this great community...and more importantly, these cases are built so great I want to keep using one for my main rig.

Soooo CaseLabs got some more of my $$$$ last night...S5 inbound, can't wait to start my new build! redface.gif
post #4872 of 22275
Quote:
Originally Posted by PCModderMike View Post


Well I think I jumped the gun guys...decided I can't turn my back on this great community...and more importantly, these cases are built so great I want to keep using one for my main rig.

Soooo CaseLabs got some more of my $$$$ last night...S5 inbound, can't wait to start my new build! redface.gif

Stufzinader
(18 items)
 
Calibri
(15 items)
 
PapaPayne
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS P8Z68-V PRO/GEN3 EVGA SuperClocked 015-P3-1582-AR GeForce GTX 580 G.SKILL Sniper 4x4 F3-12800CL9D-8GBSR2 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 CT256M4SSD2 WD7501AALS Caviar Black WD5002AALX Caviar Black Lite-On iHAS124-04 
CoolingCoolingOSMonitor
Noctua NH-D14 Silverstone AP121-L x 6 Win 7 64bit HP ZR2440w 
KeyboardPowerCaseMouse
Ozone Gaming Gear Strike Mechanical Gaming Keyb... SeaSonic X Series X-850 SilverStone Temjin Series SST-TJ04B-EW Logitech G9x Black Two modes scroll USB Wired L... 
Mouse PadMouse Pad
Zowie Gear G-TF Speed e-Sport Gaming Mouse Pad Ratzpad 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB Western Digital Caviar Black WD5002AALX 500GB 7... Lite-On iHAS124-04 COOLER MASTER Hyper 212 EVO 
OSMonitorKeyboardPower
Windows 7 64 bit HP ZR2440w  CM Storm QuickFire Rapid SGK-4000-GKCL1-US SeaSonic X-850 
CaseMouseMouse Pad
AZZA Genesis 9000 CSAZ-9000B Logictech G9x Zowie G-TF Spawn 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256GB SATA III WD VelociRaptor 600GB 10000 RPM 32MB Cache SATA... LITE-ON DVD Burner XSPC Raystorm Extreme Universal CPU Watercoolin... 
CoolingCoolingCoolingOS
EVGA GTX 680 Hydro Copper Waterblock Lamptron FC8 Fan Controller GELID Solutions Gamer Fan WING 12 Blue UV x 4 Windows 7 Ultimate 
KeyboardPowerCaseOther
SteelSeries Merc Stealth OCZ Fatal1ty 1000W Individually-Sleeved Modular... NZXT SWITCH 810 Gun-Metal PPCS Luxury Single Braided Cold Cathode Kit - U... 
  hide details  
Reply
Stufzinader
(18 items)
 
Calibri
(15 items)
 
PapaPayne
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS P8Z68-V PRO/GEN3 EVGA SuperClocked 015-P3-1582-AR GeForce GTX 580 G.SKILL Sniper 4x4 F3-12800CL9D-8GBSR2 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 CT256M4SSD2 WD7501AALS Caviar Black WD5002AALX Caviar Black Lite-On iHAS124-04 
CoolingCoolingOSMonitor
Noctua NH-D14 Silverstone AP121-L x 6 Win 7 64bit HP ZR2440w 
KeyboardPowerCaseMouse
Ozone Gaming Gear Strike Mechanical Gaming Keyb... SeaSonic X Series X-850 SilverStone Temjin Series SST-TJ04B-EW Logitech G9x Black Two modes scroll USB Wired L... 
Mouse PadMouse Pad
Zowie Gear G-TF Speed e-Sport Gaming Mouse Pad Ratzpad 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB Western Digital Caviar Black WD5002AALX 500GB 7... Lite-On iHAS124-04 COOLER MASTER Hyper 212 EVO 
OSMonitorKeyboardPower
Windows 7 64 bit HP ZR2440w  CM Storm QuickFire Rapid SGK-4000-GKCL1-US SeaSonic X-850 
CaseMouseMouse Pad
AZZA Genesis 9000 CSAZ-9000B Logictech G9x Zowie G-TF Spawn 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256GB SATA III WD VelociRaptor 600GB 10000 RPM 32MB Cache SATA... LITE-ON DVD Burner XSPC Raystorm Extreme Universal CPU Watercoolin... 
CoolingCoolingCoolingOS
EVGA GTX 680 Hydro Copper Waterblock Lamptron FC8 Fan Controller GELID Solutions Gamer Fan WING 12 Blue UV x 4 Windows 7 Ultimate 
KeyboardPowerCaseOther
SteelSeries Merc Stealth OCZ Fatal1ty 1000W Individually-Sleeved Modular... NZXT SWITCH 810 Gun-Metal PPCS Luxury Single Braided Cold Cathode Kit - U... 
  hide details  
Reply
post #4873 of 22275
Yeah my Seasonic X650 seems just fine with the 4 screws holding it. I could use one of the unused HDD pieces of rubber under the two far corners if I wanted, seem like the perfect size to prevent sag.

I've been sleeving the past two nights, but ran out of material. I have more coming in-bound. My motherboard should be here Wednesday. I'll need a few paychecks to finish the build the right way, so I'll have to take my time.
post #4874 of 22275
Quote:
Originally Posted by socketus View Post

Quote:
Originally Posted by PCModderMike View Post


Well I think I jumped the gun guys...decided I can't turn my back on this great community...and more importantly, these cases are built so great I want to keep using one for my main rig.

Soooo CaseLabs got some more of my $$$$ last night...S5 inbound, can't wait to start my new build! redface.gif



lachen.gif That GIF is perfect
877.gif

Also, excited to see what you do with the case @stickg1. You've reminded me, I need to hustle up and start sleeving my PSU. Trying to have it done before my case gets here, it's going to be awhile though so I should be able to swing it.
post #4875 of 22275
Anyone heard anything about the Flexbay 140.3 mount? Depending on my psu setup, i may stick a 420 rad in the front. Would be cleaner to use one 140.3 mount vs a 140.2 + 140.1 (also may cost less).

btw, I did pm Kevin about this.
post #4876 of 22275
Quote:
Originally Posted by wermad View Post

Anyone heard anything about the Flexbay 140.3 mount? Depending on my psu setup, i may stick a 420 rad in the front. Would be cleaner to use one 140.3 mount vs a 140.2 + 140.1 (also may cost less).

btw, I did pm Kevin about this.

I'm not sure, but I don't think the screw holes would line up correctly if you tried the 140.1&140.2 route. I think remember someone asking Kevin about that in a different thread here somewhere. Sorry I can't be more specific though, but he said the 15mm hole spacing gets thrown off trying it that way between the .1 & .2 mounts
post #4877 of 22275
Quote:
Originally Posted by wermad View Post

Anyone heard anything about the Flexbay 140.3 mount? Depending on my psu setup, i may stick a 420 rad in the front. Would be cleaner to use one 140.3 mount vs a 140.2 + 140.1 (also may cost less).

btw, I did pm Kevin about this.

Wait, wut...you still have your CaseLabs case? I thought I saw you building in something else in the water cooling gallery...
post #4878 of 22275
Quote:
Originally Posted by Jimhans1 View Post

I'm not sure, but I don't think the screw holes would line up correctly if you tried the 140.1&140.2 route. I think remember someone asking Kevin about that in a different thread here somewhere. Sorry I can't be more specific though, but he said the 15mm hole spacing gets thrown off trying it that way between the .1 & .2 mounts

Thanks dude thumb.gif . If i go with the 140.2 + 140.1, I would just mount the rad to the 140.2 and stick a fan in the 140.1. The rad should hold with that mounting. Though, its definitely cleaner w/ a 140.3 imho.

Plan is to go w/ two small psu (since Lepa is pissing me off), stick two 280s below w/ the psu's, tow 560s on top and squeeze in my 420 in the front. There's space since I can push back to 280s a bit back (probably using xspc mounts) to clear that 420.
Quote:
Originally Posted by PCModderMike View Post

Wait, wut...you still have your CaseLabs case? I thought I saw you building in something else in the water cooling gallery...
.


I sold the TH10 and i bought a temporary case for the mean time. Its a good case (blackhawk ultra) but I have some extra money (sold some stuff I could do w/out and some wc stuff) and so I wanna step up to a STH10 which can do 140mm rads. I already bought 15 more Cougar 140s from newegg (40% off, yeah baby!!!!!!).

Hard to come by a used STH10 so I may just go new. I don't wanna get rid of my nice UT60s so that's my plan so far biggrin.gif. Temporary case will work for now. Hoping taxes kick in soon to order my STH10.
post #4879 of 22275
Quote:
Originally Posted by wermad View Post

Quote:
Originally Posted by PCModderMike View Post

Wait, wut...you still have your CaseLabs case? I thought I saw you building in something else in the water cooling gallery...
.


I sold the TH10 and i bought a temporary case for the mean time. Its a good case (blackhawk ultra) but I have some extra money (sold some stuff I could do w/out and some wc stuff) and so I wanna step up to a STH10 which can do 140mm rads. I already bought 15 more Cougar 140s from newegg (40% off, yeah baby!!!!!!).

Hard to come by a used STH10 so I may just go new. I don't wanna get rid of my nice UT60s so that's my plan so far biggrin.gif. Temporary case will work for now. Hoping taxes kick in soon to order my STH10.

The STH10 is a mighty fine case. Knowing you, I'm sure it won't be long at all before it's in your hands and you're stuffing it with hardware. thumb.gif
post #4880 of 22275
Quote:
Originally Posted by PCModderMike View Post

The STH10 is a mighty fine case. Knowing you, I'm sure it won't be long at all before it's in your hands and you're stuffing it with hardware. thumb.gif


I just got my 15 cougar 140s and one 120 (for the rear of the STH10) so I"m definitely committing to the STH10. Ordered a new roll of primochill and a Silverstone usb 3.0 w/ audio jack 3.5" bay panel as well. I wanted to stick the psu on top but I think the stock cables won't reach the 4th gpu so I'm going with both psu's mounted at the bottom. So that means I have to do the slight mod to fit the top rads.


Excited to tack this one and I'm hoping it goes down much more smoothly then the TH10.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club