My STH10 (almost) completed!
Going to work on the clean up of wires near the res and cleaning up the behind the mobo tomorrow. Also considering learning how to sleeve so I can get rid of the red PCIE cables and switch them out for white or black.
For now though, here's a side view through the window. Really great case though coming from a 750D and i'm running a 4770k with 4 290x parallel water cooling. I'm just relieved that I was able to get it done after about 5 weeks so I can finally show a picture.
Top portion is an alphacool 480 ut60 with a g2 1000w and noiseblockers / gentle typhoons push/pull
Bottom consists of my evga 1300w powering 3 gpus and the bottom fans + pump. Have the gpu loop as follows:
Res/pump - GPUs - alphacool 480 ut60 push/pull again gentle typhoon / noiseblocker combination - xspc ax360 in pull - d5 vario pump - alphacool 280 monsta in push - Res/pump
The most clutch thing I've put in here are the bitspower ball valve fittings. So easy to drain the loops now
I'm really taken aback by some of the builds in here. Things I could probably spend a year on and still not come out as good so kudos to you modders and perfectionists making those ultra sleek, clean builds. Hopefully I can work on this over time and get somewhere close
Hope you all like!Edited by phallacy - 5/3/14 at 8:56pm