Originally Posted by skupples
My favorite thing about the wider cases is the PSU support. Sacrifices have to be made w/ the STH10 when it comes to dual PSU.
Yup, its also a tad shorter and fits nicely under my desk. STH10 is a towering beast and must sit on top. Sucker is heavy still. I already had two smaller rads (280s), though the only issue was to mount them as the CL bracket was not ideal. XSPC brackets barely squeeze in and its a bit tricky to install. I regret tapping my Alpha rads to M4 as the wiggle room of the stock M3 screw surely would have made installing these upper rads much easier. After installing them, i had plenty of room for the psu's and a bit left to squeeze in that front 420 also mounted with xspc brackets.
Originally Posted by djnsmith7
So true...the wider body makes a big difference...I like the 140 support on the TH10A, but the XXL window should be larger.
The psu chamber may not be wide enough to accommodate 140mm. The mb side probably can. So you'll need the case to be maybe a 2-4 inches wider to go w/ 140s. Still, a fatter look is still phat for the TH10
. If CL does make a 140mm TH10, please name it TH10-W. W as in "wermad", inspiration for this, not as in "wide"
edit: wider TH10 may encroach into TX10 sales, so not likely to happen