Originally Posted by Baasha
I made another thread about thinking of getting a CaseLabs case but nobody responded.
Figure I'll ask in here.
I want to replace my Cooler Master Cosmos 2 case since I'm now using 2 PSUs and want a really good case for it.
I am NOT planning on water-cooling beyond the Kraken X60 I already have - the GPUs etc. will be air-cooled.
The Kraken X60 uses 140mm fans so I would like to know if the top of the Magnum TH10A or SMH10 can fit the 140mm fans?
I will give you my .02 cents here
If I assume that it's for your X79 quad gpu setup on your signature, here's my suggestion.
TH10A is too big for what you need.
- I would simply go with an SM8 with the 140mm option on the top.
- I would add a PSU mounting bar kit for you second PSU and put it horizontally in front bottom,
- I would add a Flex-Bay HDD Cage with the SSD's adapters so you can put your 8 raid ssd's their and your other ssd could go in it's native place behind the motherboard.
Here are the links to what I talked about. I also did a quick cart and you would save money compared to the TH10A.http://www.caselabs-store.com/merlin-sm8/http://www.caselabs-store.com/psu-mounting-bar-kit-sm8/http://www.caselabs-store.com/flex-bay-hdd-cage-assy/http://www.caselabs-store.com/ssd-mounting-kit/
Just my opinion here
P.S. : You were talking about the possibility of a revamped STH10 into an STH10A because of the revamped TH10 into TH10A....but these 2 cases aren't in the same family and the improvements they did on the TH10A are already like it on the STH10/SMH10/SMA8 family which are an all screwed case, interchangeable doors, reverse kit possibility, etc... so I would not expect an STH10A based on that.